Steam Wave IR999 - Iron Rival - Free user manual and instructions

Product Type	Steam Iron
Brand	Rival
Model	Steam Wave IR999
Power Supply	120 V AC, 60 Hz
Water Reservoir	See-through, capacity not specified
Soleplate Material	Non-stick coated
Variable Steam Control	Yes, selector dial
Spray Mist Feature	Yes, for dampening fabrics (select models)
Fabric Select Dial	Yes, multiple settings
Indicator Light	Yes, shows when iron is heating
Dry Ironing Capability	Yes, set steam selector to dry
Heel Rest	Yes, for upright storage
Warranty	1 year limited
Cleaning Instructions	Wipe soleplate with soft damp cloth; do not use abrasives
Storage	Empty water reservoir if not used daily; store upright
Safety Features	Auto shut-off not mentioned; avoid contact with hot parts
Country of Manufacture	Not specified

Frequently Asked Questions - Steam Wave IR999 Rival

How do I fill the water reservoir?

Unplug the iron. Set the Steam Selector to Dry and the Fabric Select Dial to OFF. Pour water into the fill hole, but do not exceed the maximum level. Avoid filling a hot iron to prevent burns.

How do I use the iron for dry ironing?

Turn the Steam Selector to the (Dry) setting. Plug into a 120V outlet. Select the desired fabric setting using the dial. Allow the iron to heat for 2 minutes before use.

How do I use the steam ironing function?

Fill the water reservoir first. Plug in and select fabric setting. After 2 minutes heating, turn the Steam Selector to the desired steam level. Always set Steam Selector to Dry and Fabric Dial to OFF when not ironing.

How do I clean the soleplate?

Turn off the iron and allow it to cool. Wipe the soleplate with a soft, damp cloth. Do not use abrasive cleansers, scouring pads, or vinegar, as they can damage the finish.

How should I store the iron after use?

Turn off the iron and unplug. Allow it to cool. Empty the water reservoir by turning the iron upside down over a sink and gently shaking. Loosely loop the cord around the heel rest and store the iron upright on its heel rest.

What is the Spray Mist feature and how do I use it?

The Spray Mist feature releases a fine water spray to dampen fabrics, helpful for heavy fabrics or setting creases. Ensure the water reservoir is at least 1/4 full, then press the Spray Mist button firmly.

What should I do if the iron does not heat?

Check that the iron is plugged into a working 120V outlet. Ensure the Fabric Select Dial is set to a fabric setting (not OFF). If still not heating, contact customer service at 1.800.557.4825 (US) or 1.800.557.482.5 (Canada).

What is covered under the warranty?

The 1-year limited warranty covers defects in material and workmanship from the date of purchase. It does not cover normal wear, misuse, or damage from unauthorized repairs. Proof of purchase is required.

What safety precautions should I take?

Always read all instructions before use. Do not leave the iron unattended while plugged in. Keep away from children. Never yank the cord to unplug. Do not immerse in water. Use caution with hot metal parts, hot water, and steam.

Can I use tap water in the iron?

Yes, the manual recommends using tap water. Do not fill beyond the maximum level. For longer iron life, empty the reservoir if not used daily.

USER MANUAL Steam Wave IR999 Rival

Jarden Consumer Service

20 B Herford Street, Brampton, Ontario L6Y 0ML.

in Canada, imported and distributed by Canadian Corporation (canada) Limited, doing business as Larden Consumer Solutions.

Among business as Lauren Consumer Solutions, local Korea, FL 354

Distributed by Sunbeam, Products, Inc.

RIVAL*and SPRAY MIST are registered trademarks of Sunbeam Products Inc.

©2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved.

www.fivalproducts.com

USA: 1,800,557,4825

for product questions:

1 Year Limited Warranty

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively "JCS") warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a similar product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty. This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on JCS's Liability?

JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition.

Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.

JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.

JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.

Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A. -

If you have any question regarding this warranty or would like to obtain warranty service, please call 1.800.557.4825 and a convenient service center address will be provided to you. In Canada –

If you have any question regarding this warranty or would like to obtain warranty service, please call 1.800.557.4825 and a convenient service center address will be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or claim in connection with this product, please write our Consumer Service Department.

PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

GUARDE ESTAS INSTROCCIONES

PRECAUTIONS IMPORTANETS

GarantíaLimitadade1Año

electrician. Do not attempt to defeat this safety feature.

To reduce the risk of electrical shock, this application has a polarized plug (one blade is wider than the other). This plug hits a polarized outlet only one way; if the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a guaranteed

For Products Purchased in the United States and Canada

cord so that it cannot be pulled or tipped over.

- If an extension cord is absolutely necessary, a 15-armper cord should be used. Cord rated for less amperage may overheat. Care should be taken to arrange the extension

high wattage appliance on the same circuit.

• This is a 1100-Watt appliance. To avoid a circuit overload, do not operate another

SPECIAL INSTRUMENTS

Do not set the iron on an unprotected surface, even if it is on its heel rest.

- Your RIVALE iron is designed to rest on the heel rest. Do not leave the iron unattended.

1.800.557.4825.

- If the iron is not operating normally, disconnect from the power supply and have the iron serviced by an authorized service center. Or call Customer Service at

- Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a steam iron upside down – there may be hot water in the reservoir.

- Close supervision is necessary for any appliance being used by or near children. Do not leave iron untreated while plugged in or turned on or on an ironing board.

cause a risk of electric shock when the iron is used.

damaged. To avoid the risk of electric shock, do not disassemble the iron. Take it to an authorized service center for examination and/or repair. Incorrect resassembly can

• Do not operate iron with a damaged cord or if the iron has been dropped or

and when not in use.

• Always disconnect iron from electrical outlet when filling with water or emptying

away. Loop cord loosely around iron when storing.

- Do not allow cord to touch hot surfaces. Let iron cool completely before putting

instead, grasp plug and pull to disconnect.

plugging or unplacing from outlet, Never yank cord to disconnect from outlet;

• The Fabrics Select Plan and Screen Level should always be fired OFF before

other liquids.

• To protect against risk of electric shock, do not immerse the iron in water or

• Use iron only for its intended use.

READ ALL INSTRUCTIONS BEFORE USE

be followed including the following:

When using electrical appliances, basic safety precautions should always

IMPORTANT SAEGUARDS

InstructionManualIR Series

Pair of steam iron with black cord and white body, no visible text or symbols

www.rivalproducts.com

P.N. 126187

FEATURES OF YOUR RIVAL® IRON

1. SPRAY MIST® Release (select models only)
2. Water Fill Hole
3. Variable Steam Selector
4. SPRAY MIST® Button (select models only)
5. Indicator Light
6. See-through Water Reservoir
7. Fabric Select Dial
8. Iron Soleplate

CARACTERÍSTICAS DE SU PLANCHA RIVAL®

Visit www.rivalproducts.com to view Ironing Guide and Ironing Tips

TO FILL THE WATER RESERVOIR (use tap water)

1. Make sure the iron is unplugged. Set the Steam Selector to (Dry) and the Fabric-Select Dial to OFF.
2. Locate the Water Fill Hole.
3. Pour water into iron water reservoir. Do not fill water reservoir beyond maximum fill level.

WARNING: To prevent the risk of burns, be careful when filling a hot iron with water. Hot metal parts, hot water and steam can cause injuries.

DRY IRONING

1. Make sure the Steam Selector is turned to the (Dry) setting.
2. Plug the cord into a 120-Volt AC outlet.
3. Select the fabric setting you desire using the dial. Allow the iron to heat for 2 minutes. While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface.

Note: While the Steam Selector is turned to the (Dry) setting, you may still use the SPRAY MIST feature. Please make sure the water reservoir is 1/4 full of water. (select models only)

STEAM IRONING

1. Follow the instructions for "To Fill the Water Reservoir."
2. Plug the cord into a 120-Volt AC outlet.

3. Select the fabric setting you desire using the dial. Allow the iron to heat for 2 minutes. While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface.

4. Turn the Steam Selector to the appropriate setting. Begin Ironing.

IMPORTANT: When not ironing, always set the Variable Steam Selector to Dry) and the Fabric Select Dial to OFF.

SPRAY MIST® FEATURE (select models only)

SPRAY MIST® FEATURE is a powerful water spray mist that dampens the fabric to aid in removing wrinkles from heavy fabrics and for setting creases.

TO USE THE SPRAY MIST® FEATURE: Press the Spray Mist® button firmly.

CARING FOR YOUR IRON AFTER USE

1. Turn the Variable Steam Selector to (Dry) and Fabric Select Dial to Off.
2. Unplug the iron from the power source.

WARNING: NEVER yank the power cord when unplugging the iron.

This can damage the cord.

STORING YOUR IRON

1. Follow instructions above to turn off iron. Allow the iron to cool.
2. If you do not use your iron on a daily basis, empty the water reservoir after each use for a longer iron life. To do so, unplug the iron, turn the iron upside down, open the fill hole cover, and allow water to flow from the fill hole. Shake the iron gently to remove trapped water drops.
3. Loosely loop the power cord around the heel rest and store the iron on its heel rest.

IMPORTANT: Wrapping the cord around the iron too tightly can damage the cord.

MAINTAINING YOUR RIVAL® IRON

CLEANING THE SOLEPLATE

Clean the soleplate if starch or other residue accumulate.

To CLEAN THE SOLEPLATE: Follow instructions above to turn off iron. Allow the iron to cool and then wipe it with a soft, damp cloth.

WARNING: DO NOT use abrasive cleansers, scouring pads or vinegar to clean the soleplate. This will damage the finish. Run the iron over an all-cotton cloth to remove any residue.