PSB

Alpha P5 - Pregnant PSB - Free user manual and instructions

Find the device manual for free Alpha P5 PSB in PDF.

📄 17 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice PSB Alpha P5 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeBookshelf Speaker
Dimensions (H x W x D)21.6 cm x 14.0 cm x 19.1 cm (8.5 in x 5.5 in x 7.5 in)
Weight5.0 kg (11.0 lb) each
Power Handling10 – 80 W RMS
Impedance8 ohms
Sensitivity87 dB (1 W / 1 m)
Frequency Response55 Hz – 21 kHz (±3 dB)
Crossover Frequency2.5 kHz
Drivers5.25 in (133 mm) polypropylene woofer, 1 in (25 mm) titanium dome tweeter
Enclosure TypeBass reflex with rear port
GrilleMagnetic, removable
TerminalsGold-plated binding posts, bi-wire / bi-amp capable
FinishesBlack Ash, Cherry, White
Included AccessoriesUser manual, warranty card, adhesive rubber feet
Recommended Amplifier Power15 – 100 W RMS per channel
Warranty5 years limited

Frequently Asked Questions - Alpha P5 PSB

What is the best placement for the Alpha P5 speakers?
Place the speakers on sturdy stands or shelves at ear level, at least 20 cm (8 in) from the rear wall to allow the bass reflex port to operate correctly. Avoid corners to prevent boomy bass.
Can I use these speakers with a low-power amplifier?
Yes, the Alpha P5 has a sensitivity of 87 dB and an 8-ohm impedance, making them compatible with amplifiers from 10 to 100 W RMS. Ensure the amplifier can drive 8-ohm loads.
How do I clean the speakers?
Use a soft, dry cloth to wipe the cabinet. Do not use any solvents or abrasive cleaners. The grille can be removed and gently vacuumed or dusted with a soft brush.
Is the grille removable?
Yes, the grille is held by magnets and can be easily removed for a more open sound or for cleaning. Handle the grille carefully to avoid damaging the fabric.
What type of amplifier connection should I use?
Connect your amplifier to the binding posts using high-quality speaker wire. The posts accept banana plugs, spade connectors, or bare wire (up to 10 AWG). For bi-wiring, remove the jumper straps.
What is the warranty period for the Alpha P5?
The Alpha P5 comes with a 5-year limited warranty from the date of purchase. Coverage includes defects in materials and workmanship. Proof of purchase is required.
Can I place these speakers on a shelf inside a closed cabinet?
It is not recommended because the rear port needs free space to produce accurate bass. If you must place them in a cabinet, leave the front open and at least 10 cm (4 in) behind the speaker.
What is the recommended power handling for these speakers?
The Alpha P5 can handle 10 – 80 W RMS continuously. Use an amplifier rated between 15 and 100 W per channel for optimal performance without risking damage.
Are the drivers replaceable?
Yes, the woofer and tweeter are designed to be user-replaceable. Contact PSB customer support or an authorized service center for genuine replacement parts and instructions.
How do I break in the speakers?
Break-in is not strictly necessary, but playing music at moderate volume for 20-30 hours can stabilize the suspension components. Avoid maximum volume during this period.

User questions about Alpha P5 PSB

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Pregnant in PDF format for free! Find your manual Alpha P5 - PSB and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Alpha P5 by PSB.

USER MANUAL Alpha P5 PSB

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : PSB

Model : Alpha P5

Category : Pregnant