258.32002310 - Household Fan KENMORE - Free user manual and instructions

Product Type	Household Fan
Brand	Kenmore
Model	258.32002310
Speed Settings	3 (Low, Medium, High)
Power Supply	120 V AC, 60 Hz
Plug Type	Polarized (one blade wider)
Fuse Rating	2.5 Amp (5 Amp Max), 125 Volt
Warranty	1 year limited
Assembly Required	Slide two feet into housing until tabs lock
Cleaning Instructions	Soft damp cloth with mild soap; do not immerse
Storage	Store in dry location; use original box
Safety Features	Overload protection (fuse), polarized plug
Customer Service	1-877-777-8065 (reference KBF2002A)
Intended Use	Household only, not commercial/industrial
Not for Outdoor Use	Yes

Frequently Asked Questions - 258.32002310 KENMORE

How do I assemble the fan?

Slide the two feet into the fan housing until the locking tabs fit securely into the tab locks. Then insert the plug into the back of the fan. The feet allow cord wrapping.

How do I clean the fan?

Unplug the fan. Use a soft cloth moistened with a mild soap solution. Do not use gasoline, paint thinner, or benzene. For the blades, remove the front grill by unscrewing six screws, clean with a soft damp cloth, and reattach securely.

How do I replace the fuse?

Unplug the fan. Open the fuse cover on the top of the plug by sliding it down. Remove the old fuse with a small screwdriver. Insert a new 2.5 Amp (5 Amp Max), 125 Volt fuse. Close the cover completely. If the replacement fuse blows again, discard the fan.

What should I do if the fan does not work?

Check if the fuse is blown. If so, replace it as described. Also ensure the plug is fully inserted into a 120V outlet. If the fan still doesn't work, contact customer service at 1-877-777-8065.

Can I use this fan outdoors?

No, this fan is intended for indoor household use only. Do not use outdoors or in windows.

What is the warranty on this fan?

Kenmore offers a one-year limited warranty from the date of purchase. If defective, return with proof of purchase to any Sears or Kenmore outlet for free replacement. Warranty void if used for other than private household purposes.

What are the speed settings and how do I adjust them?

The fan has three speeds: Low (1), Medium (2), and High (3). Turn the speed control dial on the back of the fan to your desired setting. Position 0 is off.

Can I use a solid-state speed control with this fan?

No, to reduce the risk of fire or electric shock, do not use any solid-state speed control device with this fan.

How should I store the fan when not in use?

Store the fan in a safe, dry location. Protect the fan head from dust; using the original box is recommended.

What safety precautions should I take?

Always read instructions before use. Keep away from children. Do not immerse in water. Avoid operating near flammable fumes. Do not run cord under rugs. Unplug when not in use, before cleaning, or before assembly/disassembly.

USER MANUAL 258.32002310 KENMORE

If you have safety, operation or maintenance questions concerning the use of this product, call the following customer assistance number: 1-877-777-8065 and reference KBF2002A

If this product fails due to a defect in material or workmanship within one year from the date of purchase, return it with proof of purchase to any Sears store or other Kenmore outlet in the United States for free replacement.

This warranty is void if this product is ever used for other than private household purposes.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

KENMORE GARANTÍA LÍMITADA DE UN AÑO

Sears Brands Management Corporation, Hoffman Estates, IL 60179

P/N 163508

When using electrical appliances, basic safety precautions should always be taken including the following:

1. Read all instructions before using this appliance.

2. Use fan only for purposes described in the instruction manual.

3. To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.

4. Close supervision is necessary when any appliance is used by or near children.

5. Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning.

6. Avoid contact with moving parts.

7. DO NOT operate in the presence of explosive and/or flammable fumes.

8. To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance.

9. DO NOT operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. Discard fan or return to an authorized service facility for examination and/or call the following customer assistance number to arrange for possible product repair: 1-877-777-8065.

10. DO NOT run cord under carpeting. Do not cover cord with throw rugs, runner, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

11. The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.

12. DO NOT let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas.

13. DO NOT use outdoors.

14. To disconnect, grip plug and pull from wall outlet. Never yank on cord.

15. Always use on a dry, level surface.

16. DO NOT operate fan until fully assembled with all parts properly in place.

17. This product is intended for HOUSEHOLD USE ONLY and not for commercial or industrial applications.

18. WARNING: To reduce the risk of electrical shock and injury to persons, do not use in window.

19. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.

20. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.

Use & Care Guide

Sears Brands Management Corporation,

Hoffman Estates, IL 60179

www.kenmore.com

www.sears.com

www.kmart.com

IMPORTANT SAFEGUARDSIMPORTAN

If the replacement fuse blows, a short circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.

DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.

ASSEMBLY INSTRUCTIONS

1. Slide the two feet included in the box into the fan housing until the locking tabs fit securely into the tab locks. Refer to Figure 1.

2. Insert the plug end into the back of the fan as shown in Figure 2. Note the orientation of the plug end to the opening in the back of the fan.

NOTE: The feet have been designed so that you may wrap the cord around them.

OPERATING INSTRUCTIONS

1. Set fan on a dry, level surface.
2. Please make sure the speed control is in the Off (0) position.
3. Plug cord into any standard 120 volt AC outlet.
4. The speed is adjustable by turning the speed control located on the back of the Fan to the desired setting.

3: HIGH speed setting
2: MEDIUM speed setting
1: LOW speed setting
0: OFF

If your (2.5 Amp/5 Amp Max, 125 Volt) replaceable fuse blows, please order a new fuse at 1-877-777-8065. Follow the below instructions to replace the fuse on the plug.

USER SERVICING INSTRUCTIONS

1. Unplug your fan. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.

2. Open fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide the cover down towards the prongs.

NOTE: Ensure that fuse cover is completely open before attempting to remove fuse.

1. Remove fuse carefully by using a small screwdriver to pry the fuse out of the compartment by the metal ends of the fuse. (see Figure 3)

2. Place plug on a solid, flat surface. Insert new 2.5 Amp (5 Amp Max), 125 Volt fuse into fuse compartment and use a small screwdriver to secure the metal ends of the fuse into the compartment.

CAUTION: Risk of fire. Replace fuse only with 2.5 Amp (5 Amp Max), 125 Volt fuse.

1. Slide fuse cover closed completely. If fuse cover is difficult to close, make sure fuse is secured in place completely by pressing down on metal ends of the fuse.

2. Risk of fire. Do not replace attachment plug. It contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.

CLEANING / MAINTENANCE

FAN CLEANING

• Always unplug the fan before cleaning.

- Do not allow water to drip on or enter into fan housing.

- Be sure to use a soft cloth moistened with a mild soap solution.

- Do not use gasoline, paint thinner or benzene as a cleaner. You may also lightly run a vacuum cleaner nozzle over the front grill to remove any dust or dirt.

Clean the fan grill and housing base with a soft, damp cloth. Please use caution around the motor housing area. Do not allow the motor or other electrical components to be exposed to water.

FAN BLADES CLEANING

To clean the fan blades, remove the front grill by unscrewing the six screws located around the perimeter. DO NOT ATTEMPT TO REMOVE THE FAN BLADES. Clean with a soft, damp cloth. Ensure that the front grill is securely fastened to the fan prior to beginning operation.

FAN STORAGE

When storing your fan in the off season, it is important to keep it in a safe dry location. It is important to protect the fan head from dust. We strongly recommend using the original box from purchase.

PUNTOS IMPORTANTES