CA-ML600 - Car radio Fusion - Free user manual and instructions

Product Type	Car stereo multimedia receiver with AM/FM/MP3/WMA/SD/USB/iPod/iPhone playback
Dimensions	Standard single-DIN (approx. 180 x 50 x 160 mm)
Weight	Approximately 1.5 kg
Power Supply	12V DC (11-16V), negative ground
Fuse Rating	15A
Maximum Power Output	4 x 50W MOSFET
Speaker Impedance	4-8 ohms
Pre-amp Output	2.0V (front, rear, subwoofer)
Radio Bands	FM (3 bands), AM (2 bands) with RDS
Media Playback	USB, SD card, AUX-In (3.5mm), iPod/iPhone via USB
Supported File Formats	MP3, WMA
Display Type	32K+ RGB variable color LCD
Detachable Face	Yes, with release button
Audio Functions	EBX bass boost, EQ presets (Flat, Pop, Rock, etc.), Bass/Treble/Balance/Fader
Subwoofer Control	Direct subwoofer level control, LPF crossover (80/120/160 Hz)
RDS Features	PTY, AF, TA, REG, CT
Charging	USB charging for iPod/iPhone (1A)
Wiring Connector	ISO connector with standard color code
Maintenance	Clean with soft, dry cloth; avoid water or cleaning fluids
Safety	Install by qualified technician; check fuse and wiring; use only Apple sync cable for iOS devices
Spare Parts / Repairability	Replaceable fuse (15A); no user-serviceable parts inside; contact dealer or Fusion service network for repairs
Warranty	1-year limited warranty (consumer)
Compatibility	Made for iPod/iPhone (iPhone 4s, 5/5c/5s, iPod touch 4th/5th gen, iPad mini)

Frequently Asked Questions - CA-ML600 Fusion

How do I reset the Fusion CA-ML600 to factory settings?

Press the RESET button located on the main unit with a ballpoint pen or metal object. This is useful after initial installation, if the unit freezes, or if you see an error on the display.

Why is there no sound from the speakers?

Check if the ignition is on and the unit is powered. Ensure the fuse is not blown and speaker connections are secure. If using an external amplifier, verify it is operating. Also press the Mute/Power button to ensure mute is off.

How do I set the tuner region on my CA-ML600?

When you first power on (or after battery disconnect), the unit displays [OCEANIA]. Rotate the Encoder Volume Control to select USA, EUROPE, or RUSSIA, then press to confirm. This can also be changed in the SYSTEM MENU under AREA.

Can I play music from a USB drive or SD card?

Yes. Insert a USB flash drive into the front USB port or an SD card (with label facing left) into the SD slot. The unit will automatically play MP3/WMA files. Ensure the device is formatted as FAT32.

How do I connect and control my iPod/iPhone?

Use an Apple sync cable to connect your iPod/iPhone to the front USB socket. The unit will begin playback automatically. You can control the device from the unit or from the iPod/iPhone itself by pressing the iPod/iPhone Internal/External Control button.

What does 'ERR-1' mean on the display?

ERR-1 indicates the USB or SD device cannot be read. Confirm the device is formatted as FAT32 (Windows file system). Also check that only MP3 or WMA files are stored.

How do I use the RDS functions?

Press MENU and set RDS ON. You can then select PTY (Program Type) to search for specific genres, turn on AF for alternate frequencies, TA for traffic announcements, and REG for regional tuning. CT sets the clock automatically.

Can I customize the display color?

Yes. Press and hold the ESC/RGB button to enter the 32K+ RGB color menu. Rotate the Encoder Volume Control to choose from 13 presets or USER to mix your own color (Red, Green, Blue intensities from 0 to 32).

How do I store and recall radio stations?

Tune to a station, then press and hold one of the Preset buttons (1-6) for 2 seconds. The preset number and 'SAVED' appear. To recall, simply press the corresponding button. You can store up to 18 FM and 12 AM stations across bands.

What should I do if the unit freezes or doesn't respond?

First, try pressing the RESET button. If that doesn't help, check the wiring and fuse. If the problem persists, consult your car audio dealer or Fusion service center.

USER MANUAL CA-ML600 Fusion

CONTENTS

Precautions & Maintenance P3

Quick Start Guide P3

Dashboard Installation P4

Removal / Re-Attachment of the Face P5

Connecting the System P6

Basic Operations P7

Audio Functions P8

System Menu P9

Radio Operation P10

RDS Operation P10

iPod / iPhone Operation P11

Media Playback (USB/SD/Aux In) P12

Additional Media Playback Options P14

Troubleshooting P16

How To Reset The Unit P16

RDS Program Types & Descriptions P17

Product Specifications P17

Supported File Types P18

Licensing P18

Registody/Your Product P20P27

Warranty P20-27

PRECAUTIONS & MAINTENANCE

GENERAL

- When cleaning the vehicle, do not get water or cleaning fluids on the unit.

- Do not attempt to open the unit chassis. There are no user servicable parts or adjustments inside.

- This unit has been tested with all compatible authentic iPod/iPhone models under normal expected operating conditions, free from any pre-existing defects in either the unit or iPod/iPhone and with unmodified or "jailbroken" software.

- No Responsibility can be taken for use of the unit other than under normally expected operating conditions in conjunction with fully functional and undamaged iPod/iPhone units which have been manufactured and authorised by Apple Inc.

- Ensure that only a Apple sync iPhone/iPod cable is used for connection to this unit.

QUICK START GUIDE TUNER REGION SETTING

When the unit is powered up for the first time (or the battery is disconnected or runs flat), you will need to set your tuner region.

1. When you press the power button to turn on the unit ① [OCEANIA] will be displayed on the LCD screen as the default Tuner region.

2. Rotate the Encoder Volume Control to select an option: OCEANIA (Australia / New Zealand), USA, EUROPE or RUSSIA.

3. Press the Encoder Volume Control to store your selection and exit to the Tuner mode.

If you make the wrong selection, you may not be able to tune in to your desired stations. This setting can be easily changed from the SYSTEM MENU — see page 9.

SELECTING THE MUSIC SOURCE

Press the source button S to cycle through the following sources (if available) — Radio → USB → SD → AUX

RGB 32K+ COLOUR SELECTION

The initial colour setting for this unit is Colour Scan. To quickly enter the 32K+ RGB colour menu, press and hold the ESC/RGB button ESC

You can then rotate the Encoder Volume Control to select from the following pre-set display colours:

WHITE: GREEN1: GREEN2: GREEN3: AMBER: PINK1: PINK2: PURPLE1: PURPLE2: BLUE1: BLUE2: USER COLOUR: ORANGE

Press the ESC/RGB button ESC to confirm your selection. See Page 10 for details on how to set the USER COLOUR

STORE DEMO MODE

When you connect the unit for the first time and press the Mute/Power button ⚫① the unit will operate Demo Mode. To exit Demo Mode, press the Mute/Power Button again. See Page 10 to turn Demo Mode off.

DASHBOARD

INSTALLATION

The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your car audio retailer.

If you are not sure how to install this unit correctly, have it installed by a qualified installer.

REMOVAL/RE-ATTACHMENT

OF THE FACE

1. Press the Panel OPEN button.
2. Hold the left-hand side of the Face and pull forward
3. Pull the Face towards you [1] to disengage it from the chassis [2].

CONNECTING THE SYSTEM
WIRING DIAGRAM

ISO CONNECTOR WIRING DIAGRAM

PIN	WIRE COLOUR	FUNCTION/LABEL
A4	YELLOW	12V CONSTANT(+)
A5	BLUE	CONNECT TO SYSTEM CONTROL TERM/NAL OF THE POWER AMP OR AUTO AN'ENNA RELAY CONTROL TERM/NAL (max 150mA 12VDC)
A6	ORANGE/WHITE	DIMMER
A7	RED	12V ACCESSORIES (+)
A8	BLACK	GROUND
B1	VIOLET	RIGHT REAR SPEAKER(+)
B2	VIOLET/BLACK	RIGHT REAR SPEAKER(-)
B3	GREY	RIGHT FRONT SPEAKER(+)
B4	GREY/BLACK	RIGHT FRONT SPEAKER(-)
B5	WHITE	LEFT FRONT SPEAKER(-)
B6	WHITE/BLACK	LEFT FRONT SPEAKER(-)
B7	GREEN	LEFT REAR SPEAKER(-)
B8	GREEN/BLACK	LEFT REAR SPEAKER(-)

NOTE

RCA splitters

may be required

for subwoofer

amplifier

connection

BASIC OPERATIONS

1. OPEN

Press this button detach the control panel.

2.ENCODER VOLUME CONTROL

Rotate the encoder volume to increase and decrease the volum

1. iPod/IPhone INTERNAL/EXTERNAL CONTROL

Press this button to switch between iPod/iPhone control.

from either the unit or from the device itself.

1. ENCODER VOLUME CONTROL AUDIO/ENTER FUNCTIONS

a) AUDIO. Press this button to enter the Audio Menu mode.

b) ENTER. In Media playback mode and Menu functions.

press this button to confirm a selection (ENTER).

5. MUTE - POWER ON/OFF ①

a) Press this button to turn Mule ON or OFF

b) Press this button to turn the unit on.

Press and hold to turn the unit off.

6. DISP - DISPLAY

al In MP3/WMA playback mode, press to display ID3 information: Track number and elapsed play Time - → File - → Album - → Title - → Artist.

b| In iPod/iPhone playback mode, press to display Album → Title → Artist

7. NUMERIC BUTTONS

al In the Tuner mode, press the Numeric buttons to recall the preset stations. Press and hold these buttons for 2 seconds to store stations.

bl In Media playback mode. Press the Numeric buttons to

perform the operations below:

Number 7 7 2 6 5 6

Barlon PeacorPlay Intro Repeat Random Folder Up Folder Down

1. SUBWOOFER - DIRECT SUBWOOFER LEVEL CONTROL

When a subwoofer is connected; use the DSLC buttons to adjust the subwoofer level up or down.

9.EQ11

Press this button to select the preset equaliser settings:

al ESC - ESCAPE. Press to quick return previous menu or mode rather than having to cycle through all of the options in the menu.

bl RGB - 32K+ RGB COLOUR. Press and hold this button to

access the 32k-variable colour setting mode. See Page 10 for more information

11. BAND/SEARCH

a) In Tuner mode, press this button to cycle through Bands: FM1, FM2, FM3, AM1 (MW1) or AM2 (MW2).

b) In Media playback mode, press to access the folder / file search mode.

c) In iPod/iPhone playback mode, press this button to access the iPod/iPhone search functions.

12. MENU

Press to access the system menu. See Page 9 for menu options.

13. TUNE UP/DOWN, FILE & TRACK UP/DOWN & FAST FORWARD/BACK

al TUNE UP/DOWN. In tuner mode, press this button to Auto Seek to the next station or press and hold this button to manually tune in to your desired station.

b) FILE & TRACK UP/DOWN. In CD or USB/SD media playback mode, press these buttons to skip a chapter, track or file.

c) FAST FORWARD/BACK. In USB/SD media playback mode, press and hold momentarily to last forward/rewind.

14. SOURCE BUTTON

Press the Source Button to cycle through the following sources if available: Radio: CD: USB: SD: AUX

AUDIO FUNCTIONS

All Audio functions are easily accessible on the CA-ML600.

AUDIO MENU. Press the ENCODER VOLUME CONTROL to access the Audio Menu mode. Then press ENTER or TUNE UP >>| to select the Audio Function to be adjusted, then rotate the ENCODER VOLUME CONTROL to select the desired setting. You can always return to the previous Audio Function by pressing the TUNE DOWN << button.

REMINDER

In the AUDIO MENU, or in any menu, you can quickly exit the menu by pressing the ESC/RGB button.

EBX ON/OFF: Turn ON or OFF the EBX [Encounter Bass Xtender] Bass Boost.

BAS Adjust the Bass level between -7 to +7.

TRE Adjust the Treble level between -7 to -7.

BAL (Balance) Adjust the balance between the right and left speakers from 12R [full right] to 12L [full left].

FAD (Fader) Adjust the fader between the front and rear speakers from 12R [full rear] to 12L [full front].

(SUBWOOFER)

SW ON/OFF Turn On or Off the Subwoofer RCA output.

SW LPF Subwoofer low pass crossover: 80/120/160Hz

SWAM ON/OFF In AM mode, turn ON or OFF the Sub output.

NOTE If the Subwoofer RCA output is set to "OFF", then the SW LPF & SWAM functions will not be displayed.

EQUALISER OPERATION

When you activate the Equaliser, the Pre-Sel Equaliser settings override your existing Bass, Midrange & Treble Settings.

Press the Equaliser button repeatedly to cycle through the following pre-sets: FLAT→POP→USER→DANCE→ROCK→CLASSIC→JAZZ→VOCAL

To return to the Bass & Treble settings that were in use before the EQ was selected, please select the USER setting.

SYSTEM MENU

Press [MENU] to access the System Menu and press again to select the item be adjusted, then rotate Encoder Volume Knob to select a value / option. To exit this menu at any time, press the ESC/RGB button. ESC

STORE (Auto store)

While in Tuner mode, press the ENCODERVOLUME CONTROL to activate Auto Store. The six strongest stations of the selected band will be saved in the preset channels automatically

RDS ON/OFF

While in Tuner mode, this selection turns On or Off RDS. RDS Functions are explained in more detail on Page 8. If RDS is set to OFF, then the RDS Functions indicated below with an * will not appear in the System Menu

PTY\* (Program Type)

Press the ENCODER VOLUME CONTROL to enter program type, then rotate the ENCODER VOLUME CONTROL to select the category.

AF\* ON/OFF

Turn On or Off the Alternate Frequencies function.

TA\* ON/OFF

Turn On or Off the Traffic Announcement function.

REG\* ON/OFF

Turn On or Off the Sel Region for Alternate Frequencies function CT* ON/OFF

Turn On or Off the CT function.

LOC® ON/OFF

[Local/Distance]. Use this setting to Auto Seek to strong local stations [Local] or all stations regardless of their strength (Distance).

AREA

Select your country/region for the tuner: OCEANIA (Australia/New Zealand); USA; EUROPE;

RUSSIA & press ESC/RGB ESC to save.

CLK (Clock)

To set the clock, rotate the Encoder Volume Control to set the hours | Note "A" or "P" will be displayed in the top-right hand of the LCD display indicating AM or PM if the Clock is in 12H mode - see below. Press the Encoder Volume control to select "minutes" then rotate the control to set.

Select the time format 12H or 24H

SELECT THE TIME FORMAT: 211.07.241

Select On or Off to activate button confirmation beep tones.

DEMO ON/OFF

Demo mode is activated when the unit is first connected to the vehicle, but is de-activated when the Power Button is pressed. It can, however, be activated again by pressing the Power Button. To stop this feature, set Demo Mode to off. COLOUR

This unit is equipped with a 32K+ RGB variable colour display. By rotating the Encoder Volume Control, you can select the system colour from the following options: COLOUR SCAN [default setting]; WHITE; GREEN 1; GREEN 2; GREEN 3; AMBER; PINK 1; PINK 2; PURPLE 1; PURPLE 2; BLUE 1; BLUE 2; USER ORANGE

USER (USER SELECTED COLOUR):

This allows you to select your choice of display colour from over 32,000 combinations [32K+]. When you select USER in the colour menu, press the Encoder Volume Control to then rotate to select the intensity or Red, Green & Blue [From between 0 and 32] to make your own custom colour. To switch between R [Red], G [Green] and B [Blue] setting modes, push the TUNE UP button

Press ESC/RGB 📄 button once you have completed your selection.

RADIO OPERATION

TUNE INTO A RADIO STATION

1. Press the SOURCE button S repeatedly until [RAOIO] is displayed on the LCD screen.

2. Select your preferred listening Band (FM or AM) by pressing 10

BAND 📄. There are 3 FM Bands [FM1] [FM2] [FM3] and 2 AM Bands [AM1] (AM2). These multiple Bands allow you to store up to 18 FM stations & 12 AM stations in memory (see below).

1. To search for a radio station, press either the TUNE UP or DOWN >>/<< buttons to search for the next station higher than the current station frequency or lower than the current frequency.
2. To manually tune to a radio station, press and hold either the TUNE UP or DOWN >>/<< button until the tuner frequency on the LCD display starts flashing. You can then release the TUNE UP or DOWN button, and press it again repeatedly until you select your desired frequency. After 5 seconds, the display will stop flashing and the unit will be tuned in to that station.

HOW TO STORE YOUR FAVOURITE STATIONS

1. Select you preferred Band. Generally you would use FM1 or AM1 to save you favourite stations (6 stations per band). If you need to store more stations, you can use FM2/S or AM2 for AM stations.

2. Tune in to your preferred station as per the steps above

3. Press and hold one of the Preset Station Buttons (1-6) for 2 seconds to store the station. The preset number and (SAVED) will be displayed on the LCD screen.

TUNE TO A SAVED or PRE-SET STATION

1. Select the relevant BAND

2. Press the Preset Station Number corresponding to your required Pre-Set station.

RDS OPERATION

The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals. If you tune to an RDS

station, an RDS icon and information about the presenter, station or program is displayed.

This unit supports the following ROS features:

(PTY) SELECT PROGRAM TYPE

Before tuning to ROS stations, you can select program type and let the unit search only for programs of the selected category.

Press the MENU button to enter the System Menu, press

ENTER again to confirm and select PTY type & search for that style station. Please see a list of PTY Types & descriptions on P14 (AF) SELECT ALTERNATE FREQUENCIES

If the radio signal from the current station is poor, you can turn on the AF (Alternate Frequency) function to let the unit search automatically for another station with a stronger signal but with the same program identification as the current station.

(TA) RECEIVE TRAFFIC ANNOUNCEMENTS

If you do not want to miss a traffic announcement during music playback, you can turn on the TA [Traffic Announcement] function. TA ON: When there is a traffic announcement, the unit switches to the tuner mode (regardless at the current mode) and begins to broadcast the announcement on traffic conditions. When the traffic announcement is over, the unit will return to the previous mode. TA OPF: Traffic announcement does not cut in.

(REG) REGION FOR AF TUNING

REGION: Only stations in the current region will be tuned to automatically.

REG OFF: All stations can be tuned to automatically

(CT) CLOCK TIME

Turn CT on to set the clock time using ROS data. Turn CT off to set the clock time manually.

This unit is equipped with iPod/iPhone control which allows you to directly control and charge iPod/iPhones using the units controls - with display of iPod/iPhone track information appearing on the unit's LCD display.

Please read below for more detailed operation.

CONNECTING AN iPod OR iPhone

Insert the Apple Sync cable to the Front USB socket as shown and the unit will start playing the iPod/iPhone automatically

BASIC SEARCH - PLAYLIST/ARTIST/ALBUM/SONG on iPod/iPhone

Press BAND to browse the iPod/iPhone menu.

Then rotate the Encoder Volume Control clockwise to and press ENTER to choose one of the following selections, then follow the steps below:

PLAYLIST Rotate the Encoder Volume control to select your desired Playlist and press ENTER to start play.

ARTIST Rotate the Encoder Volume Control to select your

desired Artist then press ENTER. Rotate the Encoder Volume Control to then select an Album & press ENTER. Rotate the Encoder Volume Control again to select a song within the selected Album.

ALBUM Rotate the Encoder Volume Control to select your desired Album and press ENTER to select it. Then rotate the Encoder Volume Control to select a specific song within the selected Album.

SEARCH FOR FURTHER CONTENT on iPod/iPhone

In addition to the PLAYLIST/ARTIST/ALBUM search functions, there are also additional fields you can search on your iPod or iPhone – the full list of fields is as follows:

PLAYLIST / ARTIST / ALBUM / SONG / GENRE / COMPOSER / AUDIOBOOK / PODCAST

1. Rotate the Encoder Volume knob to select the desired search field, then press ENTER to confirm.

2. Rotate the Encoder Volume knob to select the desired selection within the field then, press ENTER to confirm.

NOTE When searching for Alaum, Artist, Song etc., rotate the Encoder Volume Control clockwise to search from A-7 or anti-clockwise for Z-A search.

RANDOM PLAY

Press RDM to cycle between the following modes:

ROM FLO - Plays the current album randomly.

RDM ALL - Plays the whole iPod/iPhone library randomly. 12

RDM OFF - Turns the Random function off.

iPod/iPhone MASTER CONTROL MODE

Press the button Be switch between the two control options

- Unit control mode: Use the head unit controls to select Track/Artist/Album/Playlist etc. This is the Default setting. - iPod/iPhone control mode: Use the iPod/iPhone to select the Artist/Album/Track etc.

This mode is useful if you need to sort through a large amount of Tracks/Albums etc.

NOTE

When using an iPhone, the LCD Screen will display (iPod) upon connection to indicate "Music" section of the iPhone is in use.

MEDIA PLAYBACK

[USB/SD/AUX IN]

MEDIA PLAYBACK

Use the following functions during media playback:

- Press ▶/no pause the music playback. Press this button again to resume music playback.

NOTE the volume level can be adjusted while the unit is paused

- Press the 1 / 1 to skip forward to the beginning of the next or previous chapter/track.

- Press and hold to fast forward or fast rewind through the track.

USB OPERATION

Insert the USB Device

1. Open the cover marked ⇌ on the front panel.

1. Insert the USB device into the USB socket. The unit will start playing from the USB device automatically.

Removal of the USB Device

Before removing the USB device from the front panel, always remember to switch to another Source then remove the USB device.

SD CARD OPERATION

Insert the SD Card

1. Press the OPEN button to remove the front panel.

2. Hold the left hand side of the panel & pull forward to disengage it from the chassis.

3. Insert the SD card into the slot with label facing left until a "CLICK" sound is heard.

4. Replace the front panel and the unit will start playing files from the card automatically.

Removal of the SD Card

Detach the face and press the card until you hear a click sound. The card is now disengaged. You can then remove the card.

NOTE

Please ensure that USB devices & SD cards contain WMA or MP3 files only.

USING AUX-IN

Connect the external device to AUX in jack using a 3.5mm stereo Aux In cable (not supplied) located on the face, then press the Source button to select AUX mode. Press the Source Button again to select other source options.

ADDITIONAL MEDIA PLAYBACK FUNCTIONS (CD/USB/SD)

PLAY OPTIONS

MP3/WMA File or Folder Search

• Press the BAND 📞 button on front panel access the MP3/WMA file search mode.
• Rotate the Encoder Volume Control to search through all folders on the device then press ENTER to make your selection
• Rotate the Encoder Volume control to select the desired track within the previously selected folder and press ENTER to start it playing

INTRO PLAY

• During playback, press the INT button (Preset button 2) to start intro mode. The first 10 seconds of all tracks on the storage media will be played.
• Once you have find a track you like, press INT again to resume normal playback.
  • To perform Intro Play on files in the current folder only, press & hold the INT button while in Intro Mode. [INT] will be displayed on the LCD along with the folder number. When you find your desired, press INT Twice to play the track normally.

REPEAT PLAY

- During playback, press the RPT button IPreset button 14

3) to repeat all tracks on the storage media. [RPT ALL] is displayed.
- If you press RPT again, the current track will be repeated only [RPT TRK] will be displayed
- Pressing RPT again repeats all tracks in the current folder only [RPT FLO] is displayed
- Once a track is playing in repeat mode, or to check if Repeat is on, press the RPT button.
- To Cancel Repeat, press and hold the RPT button. The display will revert back to the standard track number & time elapsed display.

RANDOM PLAY

• During playback, press the RDM button (Preset button 4) to display the current Random Play Mode. If Random Play is off, [ROM OFF] will be displayed.
• Press RDM again to select Random Play for the current folder only [RDM FLO] is displayed.
• Pressing RDM again selects Random Play for all tracks on the storage media [ROM ALL] is displayed.
• To cancel Random Play, press RDM to display the current Random Play mode, then press RDM again to cancel Random Play

FOLDER SELECT ☐ ☐

During music playback, use this button to jump to the previous/next folder on the storage device.

DISPLAY FUNCTION

During playback, pressing the DISP button will automatically cycle through the following information on the file being played on the LCD display:
FOLDER NAME→ FILE NAME→ ALBUM→ TITLE→ ARTIST
You can also keep pressing the DISP button to find the particular information you are after. Once you have cycled through all of the available track information by continuing to press the DISP button, the display will return to the standard Track Number & Time display. If you stop at this point, the Automatic Display function is cancelled.

TROUBLESHOOTING

Before going through the check list, please check the wiring connection diagram. If problems persist, please consult your Car Audio dealer.

No power or no sound

- Ignition is not on. Turn the Ignition to "accessories"

- Unit is off - press the power button to activate the unit.

- Fuse is blown. Please replace the fuse.

- If the speakers are connected to the speaker outputs,

check the speaker connections.

- If the speakers are connected to amplifier/s only, check

that they are operating correctly.

- If the above solutions do not help, please press the RESET button.

Noise in radio broadcasts

• Signals are too weak, turn LOC off.

- Check the antenna connection or replace the antenna if

necessary.

Preset stations lost

- Yellow power cable is not correctly wired. Ensure it is

connected to Constant 12V (-)

Display shows ERR-1

- The USB or SD device cannot be read. Confirm the device is formatted to FAT32 [Windows] file system.

Display shows ERR-3

- USB/SD data error. Check to ensure only MP3 or WMA

files are loaded on the storage devices.

Display shows ERR-5

- Communication error. The USB/5D device could be

damaged or corrupted. Please re-format (Fat32 only) or try

a different device.

HOW TO RESET THE UNIT

Using the Reset button, you can reset the unit to its default sellings.

• The RESET button is located on the main unit las shown

on the diagram). Press it in with a ballpoint pen or metal.

object to activate it

- The reset button can be used under the following

circumstances:

1. Initial installation of the unit when all wiring is completed

2. If the unit "freezes"

3. To RESET the unit to the factory configuration

4. Error indication on the LCD display.

RDS PROGRAM TYPES

& DESCRIPIONS

NEWS News services

AFFAIRS Politics & current affairs

INFO Special information programs

SPORT Sports

EDUCATE: Education and advanced training DB145: Radio classes and literatures

CULTURE Culture, religia and specia

SCIENCE Science programming

VARIED Entertainment programs

POP M Pop music

ROCK M Rock Music

EASY M Easy listening music

LIGHTM Light classical music

CLASSICS CLASSICAL MUSIC

OTHER N. Special music programs WEATHER Weather information

FINANCE, Financial products

CHILDREN Children's programs

SOCIAL Social affairs

RELIGION Religion

PHONE IN Talkback

TRAVEL Travel programs

LEISURE Leisure

JOTM JOTM COUNTEN

NATIONAL MUSIC

CUDIES M. Cud time in

FOLKM Folk music

DOCUMENT Documentary

A-TEST Alarm Test

ALARM Alarm function

PRODUCT

SPECIFICATIONS

Power Supply 12V DC (11-16V), Negative Ground

Fuse 15

Suitable Speaker 4-80

Impedance

Pawel output MC, SFE + 20K, PAX = Channels BMW output TWC = 6.10-15% THF

Pre-AMP output, 2.0 V/USB play mode

Aux-In level >300mV

Pod/iPhone

Charging USB,1A

RADIO

1M

Frequency Range: 87.5 - 108MHz, 50kHz Step (Oceania)

97.5 - 107.7 MHz 200kHz Step |USA|

47.5 - 118.1 MHz SiKH2 Step (Europa)

67.3 = 108 MHz (FM 172) TRUSSI

(1) H2 → H3 → H4 → H5

(3) Date of 18:49:00

-AM(MW)

Frequency Range 522-1620KHz [Oceania]

530 - 1710 KHz (USA)

527 - 1620 KHz [Europe]

022-1620 KHZ Russia

David Scolarity - Biddle Than 4,500

USB DEVICES:

USB flash memory USD 1.1 & 2.0 compatible

SUPPORTED FILE FORMATS

MPEG1/2/2.5 Layer 2/3

WMA Version 7/8/9

Sampling frequency

MPEG1 3244.1748 KHz MPEG2 1622.05/24 KU

MPEG2 N 8/11/2012KHz

WMA 22/32/44/48K1c

Sampling Bit rate

MP3/WMA 32-320Kbps & VBR

ISO9660 Level 1/2 & Joliet [uricaea]

Max File/CIR. Count 999

Max DIR. Depth 255

Sorting Method Tree sorting

ID3 V1.071.172.072.31MEX 32 Byte MP3 dir shown in manual as "Felder"

MP3 file referred to as "Track"

Maximum progress of file name 28 characters.

Maximum length of directory 16 characters

Supports Multi-Session recording.

NOTE: Product specifications are subject to change without prior notice.

LICENSING

Made for iPod iPhone

"Made for iPod and 'Made for iPhone' mean that an electronics accessory has been designed to contact specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPad or iPhone may affect wireless performance. Apple is not responsible for the operation of the device or its compliance with safety and regulatory standards."

iPod and iPhone are trademarks of Apple inc., registered in the U.S. and other countries.

Windows Media and the windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

REGISTER YOUR PRODUCT ONLINE:

For your own peace of mind, register your product purchase online at www.fusionelectronics.com

We'll keep you up to date with any news related to your product or new accessories to help you get the most from your product.

By registering your product you can be assured that if the unexpected occurs we'll have your details and be ready to help.

THE FUSION PROMISE OF QUALITY

LIMITED 1 YEAR CONSUMER WARRANTY

FUSION Electronica Limited 'FUSION' warrants this FUSION Speaker, Subwoofer, Amplifier Head Unit or genuine FUSION Accessory 'product' is free from defects in

material and workmanship, according to the following terms and conditions:

The limited warranty in the FUSOIL product purchased stands to the first booke 112 months being sold on the date of purchase of the product.

- The limited warranty blends only to the origin, consumer purchaser for consumer of the product and is not designated as transferable to any subsequent purchaser/fond user. - The limited warranty reserves only for consumers who purchase the product in one of the companies (or atpeak) net worth an www.luxmed.rechen.com. The limited was merely as sole value, n.i.125005.516384, by law or sale of the product.

- During the United Warrant period, FUSION or his authorized service network will repair or replace at FUSION or FUSION'S authorized dealer, and defective product or parts thereof with more and recurring the product to the consumer in working condition. No change will be made to the consumer for either place or labour in repairing or replacing the product. All replaced parts and cr amplitude tests could be a case of defects, all items in shipment, and therefore shall not be obtained under these limits was only items. - Finished product will be warranted for the balance of the proper warranty period or thirty (30) days from the case or repair, whichever is longer.

• All warranty claims must be accounted with a copy of this warranty card, and a copy of proof of purchase date

The consumer shall have no coverage or benefits under the limited warranty if any of the following conditions are applicable.

- I project has been subject for environmental use, thermal conditions, inverter storage, exposure to wastewater discharge or deterioration, weathering to increase temperature or other such environmental conditions, unsaturated immobilizations, unsaturated infections, unsaturated repair including but not limited to use of unauthorised space parts in inspection, misuse, request, cause, etc. during installation, actual Bus, split of foods or liquids, inclusion of customer controls or other cuts which are beyond the reasonable centre of PLSDS, including disinfectants in consumable parts such as flutes, and linuosity or damage. In accordance with correction strictly by defects in materials or workmanship, and norms, waste and heat of the product.

- FUSION was not notified by the consumer of the alleged defect or malfunction of the product during the applicable limited warranty period.

- The product serial number or the accessory date code has been removed, defaced or altered.

- This product was used with or connected to an accessory not supplied by FUSION or 31 for use with FUSION product, or used in a manner other than its intended use.

If a problem develops during the limited warranty period, the consumer should take the following step-by-step procedure:

1. The consumer shall, return the product to the place of purchase for repair or replacement processing.

2. The consumer shall also be charged for any parts or labour charges not covered by this limited warranty

For the remittances shall be responsible for repartures related to redistribution of the product.

1. If the product is returned to FUSK's after the expiration of the warranty period, -FUSK's normal service policies shall apply and the consumer will be changed

accordingly:

THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY APPLY TO THE EXTENT THAT THEY ARE NOT SUPERCEDED BY ANY OTHER RIGHTS AND REMEDIES UNDER ANY APPLICABLE LEGISLATION THAT CANNOT BE EXCLUDED. OTHERWISE, TO THE EXTENT PERMITTED BY LAW, ANY IMPRIED WARRANTY IS EXCLUDED AND THE FOREGUNDS WARRANTY IS THE PURCHISER'S RULE AND EXCLUDING REMEDY AND IS IN LEG OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, TO THE EXTENT PERMITTED BY LAW, FUSION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OR A LOSS OF ANTICIRATED BENEFITS OR PROFITS, OUT OF USE OR INABILITY TO USE THE PRODUCT.

- Some states in America so not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific, and also within any regulation state to share

- FUSION malvar assumer me auffer was one auffer had service continue or are necessary to enable to assume for it are minor utilisation at liable basis that which is our mode

warranted by in this year-m/y

- All warranty information, product features and specifications are subject to change without notice.

AUSTRALIAN CONSUMERS

FUSION

LIMITED 1 YEAR CONSUMER WARRANTY

Fusion Electronics Pty Limited, Unit 21/130 Kingston Road, Underwood, Queensland, 6119, Australia

Fusion Electronics Pty Limited, Inc. E11 150 lung scan house, only EMAIL: [e-mail] PHONE: [phone]

EMXIC: australisobustionelectronics.com PHONE: [phone]

THE FUSIGN PROMISE OF QUALITY LIMITED YEAR 32VSUMER WORKING

This warrant is given in addition to other rights and remedies available to the consumer under Australian Consumer Law. In addition to the Fusion Warranty our

goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for

compensation for any others reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of accept

able quality and the failure does not amount to a major failure.

FUSION Factures Limited FUSION® marks this FUSION Product including Speaker, Subwoofer, Amplifier Head Unit to genuine FUSION Accessory product is line from

detects in materials and workmanship, in accordance with the following terms and conditions:

• The limites warranty for the FUSION product purchased is only available for 1121 months after the rate of purchase.

- The limited market-side bonds are the only consumer of the United and Macau, as assumed or transferred to another person or consumer without Fuses or written

- During the limited warranty notes, 1-LIGEN or be authorized service network will revise or reclass are valid to make contract or write at its loan end.

1. Responded re-arranged and shall be warranted for the reliners of the criminal universe during the years 1950, then after the days of music, which are later

- Inpatient at delivery, the first 20% of patients in the U.S. and the U.S. (with a hospital hospital) provided at http://www.uve.com/153/80010497. The first 20% of patients in the U.S. and the U.S. (with a hospital hospital) provided at http://www.uve.com/153/80010497.

- An early time of the first time is P / M = P / M at the transition state in a third time of the

This litigation will not apply to

This is part of the 2017

Note. Examples of goods becoming of unacceptable quality or abnormal use by the consumer include

- Storage of product under improper conditions

- Explanate la intensive temperature extremes or other adverse environmental conditions.

- Insufficient modifications or product, connections or otherwise unauthorised reports including, but not limited, to the use of unsaturated parts in the repair of products

- Improper use of or installation of, or interference with, product adjustments or controls and or including antenna breakage or damage due to misuse

• Durable caused by large-mables or the electricity source.

- Arts of and literature measure, score of product in land sales, at an other base of land increases.

- Liefer the product in a view for which was not intended to be used or connecting it to an accessory not supplied by, cancelled but, or authorized by Fudon

- Are allus a regular use of a percut ransim ralul et in basema de approxable quality

- My own man. - When we believe:

1. This is a

• In order of change in the report of expectations of "net present only to the company's reporting of any companies relating to the retention and valuation of the products

be realted services including the cost of delivering the product to fusion of its audience both usual.

- Reputan has a conclusion by Funen after the Saturday party has stopped on all the Warly for any effect. To reach this Pension Warranty class, it is likely to subject to Funen's internal service

[1] P. C. and S. H. are a change in the 'and master is not supply.'

- This is a manufacturer's warranty provided to consumers of Fusion products. Variations to this warranty may only be made by Fusion and will be notified to the customer's writing

or issued on the Fusion website. Fusion Dealers, agents and authorised dealers are not authorized to make changes or any this Fusion warranty.

- All normally negligible, product resources and applications are subject to change without notice.

- Fusion is not responsible for replacing or the cost of replacing any consumer data lost occurring either due to equipment failure, or during the repair and replacement process.

FRANÇAIS

LA PROMESSE DE QUALITE FUSION

GARANTIE LIMITEE 1 AN

In addition, the production of the following bioplatin and follow-up drug products with non-fatric acidification are compared to non-fatric acidification. Non-fatric acidification is a major adverse mechanism in the following pathway:

moderate and limited. It is the permanent of interest, moderate and uninterested, independent and independent, independent and independent, as compared - ma

The following table is also required, we assume that the actual results of the results of the change in the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of the state of

1. 2016, 10: 15: 17: 18: 19: 20: 21: 22: 23: 24: 25: 26: 27: 28: 29: 30: 31: 32: 33: 34: 35: 36: 37: 38: 39: 40: 41: 42: 43: 44: 45: 46: 47: 48: 49: 50: 51: 52: 53: 54: 55: 56: 57: 58: 59: 60: 61: 62: 63: 64: 65: 66: 67: 68: 69: 70: 71: 72: 73: 74: 75: 76: 77: 78: 79: 80: 81: 82: 83: 84: 85: 86: 87: 88: 89: 90: 91: 92: 93: 94: 95: 96: 97: 98: 99: 100

2. DPM est ses autres informais de recaution de manuels d'aille a netihum/assante du netelle siège la produzant d'elles annoules liennes.

• COWNS INCHAWAT YIUNN W. S. T. (1) 50% Appam V. H. V. M. G. S. H. (2) 50% Appam V. H. V. M. G. S. H. (3) 50% Appam V. H. V. M. G. S. H. (4) 50% Appam V. H. V. M. G. S. H. (5) 50% Appam V. H. V. M. G. S. H. (6) 50% Appam V. H. V. M. G. S. H. (7) 50% Appam V. H. V. M. G. S. H. (8) 50% Appam V. H. V. M. G. S. H. (9) 50% Appam V. H. V. M. G. S. H. (10) 50% Appam V. H. V. M. G. S. H. (11) 50% Appam V. H. V. M. G. S. H. (12) 50% Appam V. H. V. M. G. S. H. (13) 50% Appam V. H. V. M. G. S. H. (14) 50% Appam V. H. V. M. G. S. H. (15) 50% Appam V. H. V. M. G. S. H. (16) 50% Appam V. H. V. M. G. S. H. (17) 50% Appam V. H. V. M. G. S. H. (18) 50% Appam V. H. V. M. G. S. H. (19) 50% Appam V. H. V. M. G. S. H. (20) 50% Appam V. H. V. M. G. S. H. (21) 50% Appam V. H. V. M. G. S. H. (22) 50% Appam V. H. V. M. G. S. H. (23) 50% Appam V. H. V. M. G. S. H. (24) 50% Appam V. H. V. M. G. S. H. •

- UNTAINED COLDING THE PROCEDURE OF CHINA'S ECONOMICS AND INCOME TITUDUAL, CONTAINED IN EQUITY - The following: (1) This is the company's major business structure and its products in China: (2) The company is holding China 50% of the share of the company.

• In addition, the value of the difference between the two variables is calculated as 12 and 13 .

The following section of the main subject is a well-defined study.

1. 2014, the number of new data sources was added to a large number of new data sources in the last year.

• OCEAN CHINESE DE FLOWING LIME OF COLDING, IN M. CHINESE, GENERAL AND TOTAL CHINESE.

The following table provides the information and the data provided by the United States Department of Health, as well as the National Health Society for Health and the United States Department of Health.

1. Tidene, no transderentene diure 251 E. coli of raw non-terpenes were conthank, die oder nicht deriendere and was an H. R. (19)6, self at hi sen der

- Hot product is manufactured in the manufacture of hot products and is used for a non-hat material (e.g. standard).
- Hot product is manufactured in the manufacture of hot products and is used for a non-hat material (e.g. standard).

Reparative of the use of central products and their application.

FUSION Electronics New Zealand

09 369 2900

FUSION Electronics Australia

1300 736 012

FUSION Electronics Europe

[phone]

FUSION Electronics USA

623 580 9000

FUSION Electronics Pacific

[phone]