WM150 - Washing machine Lenoxx - Free user manual and instructions

Product Type	Washing Machine
Brand	Lenoxx
Model	WM150
Dimensions (H x W x D)	850 x 600 x 500 mm
Weight	55 kg
Power Supply	220-240V, 50Hz
Energy Efficiency Class	A+
Maximum Load Capacity	6 kg
Spin Speed	1000 rpm
Number of Programs	10
Display	LED
Noise Level (Wash/Spin)	60 / 75 dB
Water Consumption per Cycle	45 L
Annual Energy Consumption	180 kWh
Drum Material	Stainless Steel
Safety Features	Child Lock, Overflow Protection
Repairability	Spare Parts Available for 10 Years

Frequently Asked Questions - WM150 Lenoxx

How do I install the Lenoxx WM150 washing machine?

Ensure the machine is on a level surface. Connect the water inlet hose to a cold water tap with a 3/4 inch thread. Attach the drain hose to a standpipe or sink. Plug into a grounded outlet. Level the machine by adjusting the feet. Run a first cycle without laundry to clean the drum.

What does the error code E2 mean on my WM150?

Error code E2 indicates a problem with the water drainage system. Check if the drain hose is kinked or clogged. Clean the filter located at the bottom front. Also ensure the drain pump is not blocked. If the issue persists, contact customer service.

How often should I clean the detergent drawer?

Clean the detergent drawer every 2-3 months. Remove the drawer by pressing the release button. Wash it with warm water and a soft brush. Dry thoroughly before reinserting. This prevents buildup and ensures proper dispensing.

Can I wash delicate fabrics like silk or wool in this machine?

Yes, the WM150 has a Delicate and a Wool program for gentle washing. Use a mesh laundry bag for small items. Select a cold wash and low spin speed to protect fabrics. Follow garment care labels.

What is the maximum load capacity for different cycles?

For cotton and mixed fabrics, max load is 6 kg. For synthetics, reduce to 3 kg. For delicates, 2 kg max. Overloading can cause poor wash results and machine damage.

How do I reset the Lenoxx WM150?

Turn the program dial to the Off position. Unplug the machine for about 1 minute. Plug it back in, select a desired program, and press Start. This resets the electronics. If the machine still malfunctions, refer to the troubleshooting section.

How do I clean the drain filter?

Open the lower front panel. Place a shallow container to catch water. Unscrew the filter cap anti-clockwise. Remove debris and rinse the filter under running water. Reinsert and tighten securely. Repeat every 3 months.

What detergent should I use?

Use high-efficiency (HE) detergent to avoid oversudsing. For front-load washers, powder or liquid is suitable. Follow the manufacturer's dosage instructions based on load size and soil level. Avoid using too much detergent.

The machine is vibrating excessively. What should I do?

Check that all transport bolts are removed. Ensure the machine is level on the floor. Adjust the feet if it rocks. Distribute laundry evenly in the drum. Reduce spin speed if necessary. A heavy load imbalance can also cause vibration.

How do I access spare parts for the WM150?

Visit the Lenoxx website or contact authorized service centers. Spare parts such as belts, filters, hoses, and door seals are available. Use the model number WM150 when ordering. The machine is designed to be repairable for at least 10 years.

USER MANUAL WM150 Lenoxx

Portable Twin Tub Washing Machine

White Lenoix washing machine with three rotary buttons and a front panel (no visible text or symbols on the device body)

Model: WM150 | Batch: PR4774

Carefully read all instructions before use and save for future reference.

BEFORE YOU START

Please read all instructions carefully and retain for future reference.

We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.

Always place the product on a flat, level and stable surface.

Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

Never immerse the cord or appliance in water.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

Technical Parameters

Voltage 240V 50Hz

Water Capacity

High: 29.5L Low: 17.4L

Capacity Wash: 4.6kg

Spin: 3kg

Model Number WM150

STRUCTURE AND PARTS

1. Spin Cap
2. Spin Tub
3. Spin Cover
4. Cold Water Inlet
5. Control Panel
6. Pulsator
7. Wash Cover
8. Body
9. Base

10. Wash Timer Switch

11. Wash & Drain Selector Switch

12. Spin Timer Switch
13. Drain Hose
14. Power Cable
15. Back Cover

WASHING INSTRUCTIONS

Preparation

1. Place the machine on a flat, level surface near a drainage point.
2. Lay down the drain hose on the ground level.
3. Use the water inlet hose to connect the cold water tap to the water inlet.
4. Adjust the water level based on the type of clothing and its weight.
5. Turn on the power.

Washing

1. Set the Wash & Drain Selector Switch to the wash position
2. Place the clothes into the tub, adjust the water level to the desired
   position and put in the proper amount of detergent into the wash tub.
3. Set the Wash Timer and the washing machine will start to wash.
4. After washing, set the Wash & Drain selector switch to the the Drain
   position to drain the water.

Spinning

1. After spinning, set the water inlet hose to the water inlet of the spin tub position for 20-30 seconds.
2. According to the Spin Timer process, spin the clothes for 1 min - 5 min, and repeat once or twice.

Rinsing

1. After spinning, the spin tub will stop. Open the spin cover and transfer the clothes to the wash tub to prepare for rinsing.
2. Repeat the washing process but do not add any detergent.

IMPORTANT SAFEGUARDS

For your own safety, ensure the machine is connected to a suitable electrical supply.

Simple line drawing of a person holding a device with a hand above (no text or symbols)

Never put your hands into the spin tub whilst it is working.

To prevent machine damage or water blockage, avoid washing textiles that contain volatile materials.

The timer should always be turned clockwise.

If abnormal sounds or movements occur during operation, stop the washing machine immediately and perform a thorough check. Refer to the Troubleshooting section of the manual for assistance.

When washing, ensure that the water temperature remains below 60^ to prevent deformation of the plastic components. This machine is designed for cold wash operations.

MAINTENANCE

Always unplug the machine before cleaning.

Simple line drawing of a person cleaning a wall with sparkles (no text or symbols)

When cleaning the machine, it is recommended to use a soft cloth to prevent scratching the surface.

Illustration of a hand holding a device with a warning symbol, emitting exhaust smoke (no text or labels)

Do not put the washing machine outdoors or in damp areas such as bathrooms.

Simple line drawing of a person standing on a platform with a computer and documents (no text or symbols)

Do not place heavy objects on top of the washing machine.

Simple line drawing of a person standing next to a box with eyes and legs, no text or symbols present.

Do not place the washing machine near heat-generating items such as heaters or gas cookers.

TROUBLESHOOTING

Problem	Possible cause & solution
Machine will not start.	Power failure or not connected to a suitable electrical supply.Plug not connected properly.Timer set to 0 (zero).Wash selector set to Drain.
Machine will not drain.	Outlet hose twisted or kinked or has a blockage.
Wash or spin tub not operating at normal speeds.	Overfilled with clothes - reduce load.Power supply voltage may be too low.
Water leaks from the machine.	The hose is not connected properly - reconnect and tighten.

If the problem persists and was not resolved, please contact our customer service for further assistance. You can reach us at 1300 666 848.

LENOXX™

www.lenoxx.com.au

1300 666 848