GA05-T - Loudspeaker Audibax - Free user manual and instructions

USER MANUAL GA05-T Audibax

Two circular diagrams showing concentric rings and a grid-patterned circle, no text or symbols present.

GA-T series

USER GUIDE

The GA-T range is a series of passive ceiling speakers designed with a woofer from 5 inches to 8 inches and a 13mm tweeter. The GA-T series is the perfect choice for the distribution of microphone calls and background music both for restaurants or commercial stores. The mounting frame is made of high quality ABS. The grille is made of metal. The GA-T is available in white.

SAFETY PRECAUTION

• Keep this manual for future reference.
• When cutting the mounting hole for the speaker, make sure there is sufficient clearance behind the panel (no obstructions like A/C channels, power lines etc).
  • Take care of your speaker wires, they should be free of damage. Damaged speaker wires might result in poor sound quality and can damage amplifiers.
• Only use accessories specified by the manufacturer.
• Make sure the mounting panel can support the speakers weight.
• Use sufficient amount of speakers to avoid dead spots.
• No mains power shall be connected to the loudspeakers, doing so will damage the speaker.
• This apparatus should only be serviced by qualified personnel. If not warranty might be void.
• Use cable of the right gauge, certainly for long runs.
• Use cables with clear color indication and maintain polarity throughout the whole system.
• Avoid loud feedback from microphones, this can damage your speaker.
• Please check the units condition after unpacking. If the outside of the carton box has been damaged, inform your shipper immediately.

WARRANTY INFO

The warranty for hidden defects can only be considered if they appear within the 24-month warranty period. The warranty is not valid in case of misuse, wear, power surges, improper packaging or shipping, improper use or storage and failure to comply with Audibax recommendations. The product must be returned in the original packaging with proof of purchase made by an authorized distributor of Audibax

①

MOUNT THE SPEAKER

①

②

③

The loudspeaker is easy to install, due to its simple mounting system.

(1) Use the cutout template to mark the mounting hole.
(2) When making the hole in your mounting panel, double check if there are no cables or any other obstructions behind the mounting panel. Cutting the mounting panel without this check might result in damaged infrastructure or power lines. Please make sure that the mounting structure is capable of safely supporting the speaker's weight.
(3) Remove the speaker grille: turn the mounting clamps (dog-ears) outwards and push them in the direction of the grille until it pops out. Remove the grille.
(4) Turn the dog-ears inwards again and tighten the dog-ear screws slightly to make them stay in the inward position.
(5) Connect the speaker wires and insert the speaker in the precut speaker opening.
(6) Fasten the dog-ear screws carefully until the speaker sits safely in place. Do not overtighten the dog-ear screws!
(7) Carefully push the grille back in place.

④5

O

O

O

SPECIFICATIONS GA-T

	Model	Model	Model
Characteristics	GA05-T	GA06-T	GA08-T
Outside diameter	203mm	240mm	280mm
Depth	80mm	80mm	88mm
Loudspeaker system	2 ways	2 ways	2 ways
Woofer size	5"	6,5"	8"
Tweeter size	13mm	13mm	13mm
Impedance	8 ohmios	8 ohmios	8ohmios
Power	1,5w/3w/6w	2,5w/5w/10w	2,5w/5w/10w
SPL	89	89	89
Frequency	80HZ-20KHZ	70HZ-20KHZ	60HZ-20KHZ
Material	ABS	ABS	ABS
Grille material	Metal	Metal	Metal
100W Line	Yes	Yes	Yes

AUDIBAX

ALTAVOZ DE TECHO

Two circular diagrams showing concentric rings and a textured pattern, no text or symbols present.

Serie GA-T

GUÍA DEL USUARIO