Aldridge 448556 - Toilets Signature Hardware - Free user manual and instructions

USER MANUAL Aldridge 448556 Signature Hardware

HEATED BIDET TOILET SEAT ASIENTO DE INODORO/BIDÉ CLIMATIZADO

SKU: 448556, 450177, 450179, 450181

BEFORE YOU BEGIN

We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the floor, walls, framing, plumbing, electrical fixtures, or for personal injury during installation.

Observe all local plumbing and building codes.

Unpack and inspect the seat for shipping damage. If any damage is found, contact our Customer Relations team at 1-855-715-1800.

ANTES DE COMENZAR

Ensure that you have gathered all the required materials that are needed for the installation.

CÓMO COMENZAR

SHAM241SWH.SHSR241WH

HEATED BIDET TOILET SEAT ASIENTO DE INODORO/BIDÉ CLIMATIZADO

SKU: 448556, 450177, 450179, 450181

WARNING!

IMPORTANT SAFETY INSTRUCTIONS

! Close supervision is necessary when this product is used by or near children or handicapped persons.

! Use this product for its intended use only.

! Never operate this product if the cord or plug is damaged, or if it has been dropped.

! Keep the cord away from heated surfaces.

! Do not block the air openings of the product or place the product on a soft surface, such as a bed or couch. Keep the air opening free from things like lint and hair.

! Do not use while drowsy or asleep.

! Do not drop or insert any object into any opening or hose.

! Do not use outdoors or operate where aerosol spray products are being used or where oxygen is being administered.

! Connect this product to a properly grounded outlet only.

! Do not pollute water supply, otherwise the water may damage the device or harm user.

! Do not place lit cigarettes or other ignited items on the product.

! If using any chemical toilet bowl cleaner, be sure to wipe up any spills that splash onto the plastic areas of the product. Do not use any acidic chemical detergent. Only neutral detergents are permitted.

! Do not stand, sit, or lean forcefully on the lid of the bidet toilet seat. Do not open or close the lid/seat ring forcefully to avoid damage.

! Do not expose the product to direct sunlight or heating device.

! Use provided accessories to install the device. Do not use old parts.

! In very low temperatures, the water within the device may freeze. To avoid damage, warm the unit to melt the ice.

! Make sure the user is fully seated. Otherwise, the cleaning or drying function will stop.

! Do not use warm or heated temperature settings for extended periods of time.

HEATED BIDET TOILET SEAT ASIENTO DE INODORO/BIDÉ CLIMATIZADO

SKU: 448556, 450177, 450179, 450181

¡ADVERTENCIA!

This product must be grounded. This product is equipped with a cord with a grounding wire/plug. The power cord must be plugged into an outlet that is properly installed and grounded. Do not attempt to remove the ground plug or tamper with the grounding wire.

Note: Improper use of grounding plug can result in a risk of electrical shock.

If replacement of the power cord is necessary, please contact customer relations, do not attempt to re-wire the bidet.

! Do not use while still wet from bathing, showering, or swimming.

! Do not place or drop into water or any liquid.

! Do not reach for a product that has fallen into water. Unplug product immediately, then remove the water.

! Do not touch or plug in the cord with wet hands.

! Do not connect power cord if the cord is damaged or broken.

! If the seat or lid were to break, unplug the power and shut down the water supply.

! Unplug and clean any dust on the power cord with a dry cloth regularly.

! The product must be connected to standard voltage power source (AC120V±10%, Max Current 15A).

! Do not dismantle this product to repair or remodel. Only authorized personnel such as a qualified electrician should service the product.

HEATED BIDET TOILET SEAT

ASIENTO DE INODORO/BIDÉ CLIMATIZADO

SKU: 448556, 450177, 450179, 450181

¡PELIGRO!

RIESGO DE DESCARGA ELÉCTRICA

The power rating should be within the required range (AC 120V ± 10%, Max current 15A above) GFCI Outlet. The power outlet should be close enough to reach the power cord (59" long) but far from where water can hit it. Do not plug in the product before installation is complete to prevent malfunction.

The minimum dynamic water pressure required is 11.6 psi. The maximum static water pressure required is 116 psi. Water pressure below the min and max range above will affect the performance of the product.

Measure your toilet to make sure that there is enough space for the bidet (20.25" long).

1. The distance between the 2 mounting holes must be within 4.5-7".
2. The distance from the filter to the bidet inlet should be 21.5" or less.
3. The distance between the mounting holes and the edge of the toilet bowl must be within 18-19.75".

1. Remove the toilet seat mounting bolts. Then remove the toilet seat from the toilet.

Note: Removal of existing toilet seats may differ from below.

Wash functions will only work when user is seated on the bidet seat. When the water pressure is low, the spray strength is weak, and water may not come out of the nozzle. Adjusting the spray strength may be necessary. Please sit backward to reduce the amount of water splashing.

Clean by wiping the lid, seat, and plastic parts with a wet soft cloth (water). For a deeper clean, the bidet can be removed from the toilet to access the surface beneath. Unplug the bidet, and then press the catch plate button located on the right side of the bidet, then lift the bidet slightly to remove. Make sure to not remove the bidet forcefully.

If the water pressure becomes weak, the filter may need to be cleaned. Be sure to unplug the bidet and turn off the water supply completely before removing the filter. Filter can be removed at bidet water inlet. Remove the filter and use a brush to clean. Replace filter and ensure all connections are tight before turning water supply on.

While cleaning the plastic parts, do not use harsh or acidic chemical cleaners. Use only neutral cleaners. If cleanser is in question, please contact Customer Relations 1-800-221-3379.

PROBLEM CAUSES SOLUTION
Water does not spray - No water in the supply- Water supply is turned off- Filter is stuck- Water hose is twisted	- Wait for the water to restore to its normal levels- Turn water supply valve to turn on water- Clean or replace filter- Stretch hose until it becomes untwisted
Bidet is not working	- Blackout or loose socket- Power off- Electric leakage	- Check that power cord is plugged in- Press power button until indication light turns on- Unplug power cord, re-connect, then power on if it is still not working, please unplug again and contact Customer Relations
Water pressure is weak	- Water level is set to LOW- Filter is stuck	- Turn up water level to higher setting- Clean or replace filter
Wash function does not activate	- Check if the seat is lifted or sitting uneven- Body sensor is broken	- Fix seat so it is flush on the bowl and remove any objects underneath- Contact Customer Relations
Spray is off-center	- Operational failure	- Unplug device and re-plug in after 1 min
Water is not warm	- Water temp. is set to LOW	- Turn up water temp. level to higher setting
Water is leaking	- Parts are loose or damaged	- Contact Customer Relations
Dryer is not warm	- Dryer temp. is set to OFF- Dryer is broken	- Check all connections- Contact Customer Relations
Dryer stops during use	- Dryer will stop every 4 mins	- Enable dryer again
Seat temp. not warm	- Seat temp. is set to OFF- Power-saving mode on	- Turn up seat temperature to higher setting- Turn off power-saving mode
Lid or seat closes fast	- Soft close hinge components are broken	- Contact Customer Relations
Functions work in turns nonstop	- QA testing model activated	- Unplug device and re-plug in after 1 min

HEATED BIDET TOILET SEAT

ASIENTO DE INODORO/BIDÉ CLIMATIZADO

SKU: 448556, 450177, 450179, 450181