UM-2PN - Vacuum Cleaner Baumr-AG - Free user manual and instructions

USER MANUAL UM-2PN Baumr-AG

Black and red Baumr-AG vacuum cleaner with coiled hose, no visible text or symbols on device body

UM-2PN Wet & Dry Vacuum

User Manual

[Revision 4.0 December 2023]

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or SERIOUSLY INJURED if you do not follow instructions.

It is vital that you read and understand this user manual before using the product, including safety warnings, and any assembly and operating instructions. Keep the manual for future reference.

Safety precautions and recommendations detailed here must be fully understood and followed to reduce the risk of injury, fire, explosion, electrical hazard, and/or property damage.

Safety information presented here is generic in nature – some advice may not be applicable to every product. The term "equipment" refers to the product, be it electrical mains powered, battery powered or combustion engine powered.

• Before Use - If you are not familiar with the safe operation/handling of the equipment or are in any way unsure of any aspect of suitability or correct use for your application, you should complete training conducted by a person or organization qualified in safe use and operation of this equipment, including fuel/electrical handling and safety.
• Do NOT operate the equipment in flammable or explosive environments, such as in the presence of flammable liquids, gases, or dust. The equipment may create sparks or heat that may ignite flammable substances.
• Keep clear of moving parts.
• Equipment may be a potential source of electric shock or injury if misused.
• Do NOT operate the equipment if it is damaged, malfunctioning or is in an excessively worn state.
• Do NOT allow others to use the equipment unless they have read this manual and are adequately trained.
• Keep packaging away from children - risk of suffocation! Operators must use the equipment correctly. When using the equipment, consider conditions and pay due care to persons and property.

General Work Area Safety

• Work areas should be clean and well it.
- Do not operate the equipment if bystanders, animals etc are within operating range of the equipment or the general work area.
- If devices are provided for connecting dust extraction / collection facilities, ensure these are connected and used properly. Dust collection can reduce dust-related hazards.

You CAN be KILLED or SERIOUSLY INJURED if you do not follow instructions.

You CAN be INJURED if you do not follow instructions or equipment damage may occur.

General Personal Safety

• Wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect from eye and ear injury, poisoning, burns, cutting and crush injuries. Protective equipment such as safety goggles, respirators, non-slip safety footwear, hard hat, hearing protection etc should be used for appropriate equipment / conditions. Other people nearby should also wear appropriate personal protective equipment. Do not wear loose clothing or jewellery, which can be caught in moving parts. Keep hair and clothing away from the equipment.
• Stay alert and use common sense when operating the equipment. Do not overreach. Always maintain secure footing and balance.
• Do not use the equipment if tired or under the influence of drugs, alcohol, or medication.
• This equipment is not intended for use by persons with reduced physical, sensory, or mental capabilities.

General Fuel Safety

• Petrol/fuel/gasoline is extremely flammable – keep clear of naked flames or other ignition sources.
• Do not spill fuel. If you spill fuel, wipe it off the equipment immediately – if fuel gets on your clothing, change clothing.
• Do NOT smoke near fuel or when refuelling.
  • Always shut off the engine before refuelling.
• Do NOT refuel a hot engine.
• Open the fuel cap carefully to allow any pressure build-up in the tank to release slowly.
  • Always refuel in well ventilated areas.
• Always check for fuel leakage. If fuel leakage is found, do not start, or run the engine until all leaks are fixed.

General Carbon-Monoxide Safety

• Using a combustion engine indoors CAN KILL IN MINUTES. Engine exhaust contains carbon-monoxide – a poison you cannot smell or see.
• Use combustion engines OUTSIDE only, and far away from windows, doors, and vents.

General Equipment Use and Care

• The equipment is designed for domestic use only.
• Handle the equipment safely and carefully.
• Before use, inspect the equipment for misalignment or binding of moving parts, loose components, damage, or any other condition that may affect its operation. If damaged, have the equipment repaired by an authorised service centre or technician before use.
• Prevent unintentional starting of the equipment - ensure equipment and power switches are in the OFF position before connecting or moving equipment. Do not carry equipment with hands or fingers touching any controls. Remove any tools or other items that are not a part of the equipment from it before starting or switching on.
• Do not force the equipment. Use the correct equipment for your application. Equipment will perform better and be safer when used within its design and usage parameters.
• Use the equipment and accessories etc. in accordance with these instructions, considering working conditions and the work to be performed. Using the equipment for operations different from those intended could result in hazardous situations.
• Always keep equipment components (engines, hoses, handles, controls, frames, housings, guards etc) and accessories (cutting tools, nozzles, bits etc) properly maintained. Keep the equipment clean and, where applicable, properly lubricated.
• Store the equipment out of reach of children or untrained persons. To avoid burns or fire hazards, let the equipment cool completely before transporting or storing. Never place or store the equipment near flammable materials, combustible gases, or liquids etc.
• The equipment is not weather-proof, and should not be stored in direct sunlight, at high ambient temperatures or locations that are damp or humid.
• Do not clean equipment with solvents, flammable liquids, or harsh abrasives.
• For specific equipment safety use and care, see Equipment Safety.

General Electrical Safety

• Inspect electrical equipment, extension cords, power bars, and electrical fittings for damage or wear before each use. Repair or replace damaged equipment immediately.
• Ensure all power sources conform to equipment voltage requirements and are disconnected before connecting or disconnecting equipment.
• When wiring electrically powered equipment, follow all electrical and safety codes.
• Always use a Residual Current Device (RCD) (GFCI) / Earth Leakage Circuit Breaker / Safety Switch when operating this item (electrical items only).
• High voltage / high current power lines may be present. Use extreme caution to avoid contact or interference with power lines. Electrical shock can be fatal.

General Electrical Safety

• Electrically grounded equipment must have an approved cord and plug and be connected to a grounded electrical outlet.
• Do NOT bypass the ON/OFF switch and operate equipment by connecting and disconnecting the electrical cord.
• Do NOT use equipment that has exposed wiring, damaged switches, covers or guards.
• Do NOT use electrical equipment in wet conditions or in damp locations.
• Do NOT use electrical cords to lift, move or carry equipment.
• Do NOT coil or knot electrical cords, and ensure electrical cords are not trip hazards.

General Service Information

• The equipment must be serviced or repaired at authorised service centres by qualified personnel only.
• Replacement parts must be original equipment manufacturer (OEM) to ensure equipment safety is maintained.
• Do NOT attempt any maintenance or repair work not described in this manual.
• After use, the equipment and components may still be hot – allow the equipment to cool and disconnect spark plugs and/or electrical power sources and/or batteries from it before adjusting, changing accessories, or performing repair or maintenance.
• Do NOT adjust while the equipment is running.
• Perform service-related activities in suitable conditions, such as a workshop.
• Replace worn, damaged or missing warning/safety labels immediately.

Child Choking Hazard!

- WARNING: CHOKING HAZARD - CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT SUPERVISION REQUIRED.

- Carefully inspect anything a baby or child could gain access to, including this product & packaging.

- Dangers include anything of a size that could become stuck or lodged in a baby or child's airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys, buttons, keys and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces of packaging, staples, tape etc.
• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

Vacuum Safety

• Before cleaning or maintaining the appliance, the power plug must be removed from the socket-outlet.
• Attention: Before assembly and starting operation, read the operating instructions carefully.
• Check that the mains voltage corresponds to the details on the nameplate.
• Only connect to a properly rated socket.
  • Minimum fuse protection 13A.
• Pull the mains plug out of the socket when: the unit is not in use, before opening the unit, before cleaning and maintenance.
• Never clean with solvents.
• Do not use the cable to pull the plug out of the socket.
• When unit is ready for use, do not leave unattended.
• Safeguard from children.
• Care must be taken that the mains connection lead is not damaged by being driven over, crushed, stretched, etc.
• The unit must not be operated if the mains connection lead is not in perfect condition
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent to a similarly qualified person in order to avoid a hazard.
• On no account vacuum: burning matches, glowing ashes and cigarette ends, inflammable, corrosive, fire hazard or explosive substances, vapours and liquids
• This unit is not suitable for vacuuming dust which is damaging to health
• Store the unit in a dry place
• Do not operate a defection unit
  • Servicing only by an authorized after-sales service point
• Use only for operations for which the unit is intended
  • Take great care when cleaning stairs
• Use only manufacturer's attachments and spare parts
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• IPX4 is only granted by connect an IPX4 plug to socket-out of the appliance or the cover of the socket-out is closed.
  • Max. load of socket-out: 2000W.

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material HazardFlammable liquids, gases, or substances etc may present.Avoid ignition sources and open flames. Danger of fire.	Read User ManualRead and fully understand product safety warnings, operation, procedures etc before using the product.	Use Hand ProtectionWear appropriate hand protection and take due care as the product or use of the product may present hand hazards.	EXHAUST FUMESCarbon-Monoxide HazardDo not use the product in confined areas or without adequate ventilation. Carbon-monoxide poisoning can be fatal.
Electrocution / Electrical Shock HazardHigh voltage or high current electricity may be present or required by the product. Take due care when handling electrical products, cables, plugs and leads. Electrical shock can be fatal.	Toxic Fumes / Dust HazardUsing the product or by-products from use may produce fumes, smoke or particles that could be harmful if inhaled. Wear appropriate breathing protection and have adequate ventilation.	Explosive Material HazardCombustible liquids, gases, or substances etc may be present.Avoid ignition sources and open flames. Danger of explosion.	Cutting / Amputation HazardThe product may have blades, edges or mechanical devices that can cause severe cut injury to fingers, limbs etc. Take due care when handling and using the product.
Crush HazardThe product may have blades, edges or mechanical devices that can cause severe crush injury to fingers, limbs etc. Take due care when handling and using the product.	Single Operator OnlyThe product must be operated by a single person only. More than one person operating the product may introduce additional hazards.	Use Face ProtectionWear appropriate full-face protection and take due care as the product or use of the product may present face and eye hazards.	Use Foot ProtectionWear appropriate foot protection and take due care as the product or use of the product may present foot hazards.
Use Eye / Ear / Head ProtectionWear appropriate eye and / or ear and / or head protection and take due care as the product or use of the product may present eye, hearing, and head hazards.	Running HazardDo not run on or near the product as doing so may present a fall hazard.	Diving HazardDo not dive into the product as doing so may present a neck / head injury hazard.	Adult Supervision RequiredAlways supervise children and other users of a product to prevent drowning or injury.
Skin Penetration / Puncture HazardThe product may produce pressure, emit liquids or objects that can cause severe injury to fingers, limbs, blood etc. Take due care when handling and using the product.	Hot Surface HazardBe aware that the product may produce high temperatures and hot surfaces that can cause burn injuries.	Flying Debris HazardBe aware that the product or use of the product may present hazards produced by flying debris. Wear appropriate clothing and protective devices.	Moving Parts HazardBe aware that the product contains or uses mechanical devices that move or rotate. Always wait for moving parts to stop fully before handling the product, adjusting, maintenance etc.
Carbon-Monoxide HazardDo not use the product in confined areas or without adequate ventilation. Carbon-monoxide poisoning can be fatal.	Pull HazardBe aware that the product contains or uses mechanical devices that can pull in objects and can cause severe injury to fingers, limbs etc. Take due care when handling and using the product.	Slope / Fall Injury HazardBe aware that using the product on sloping surfaces or in slippery conditions may present additional dangers from falls and contact with blades, moving parts, hot surfaces etc.	"Slam Dunk" WarningDo NOT attempt "slam dunk" manoeuvres as this may result in severe injury due to falling, product breakage or collapse etc.
Electrocution / Electrical Shock Hazard - OutdoorHigh voltage or high current electricity may be present or required by the product. Do NOT use in rain, damp, or wet conditions. Electrical shock can be fatal.	Electrocution / Electrical Shock Hazard - DisconnectHigh voltage or high current electricity may be present or required by the product. Always disconnect the product from the electrical supply before handling the product, adjusting, maintenance etc.	Power Line Electrocution HazardHigh voltage / high current power lines may be present. Use extreme caution to avoid contact or interference with power lines. Electrical shock can be fatal.	"Kick-Back" HazardHigh level of "kick-back" hazard that can cause the machine to suddenly rotate towards operator. Kick-back injury can be fatal.
Winch Operator Position HazardDo NOT stand between winch and load. Do NOT use winch to move people.	Winch Lift HazardDo NOT LIFT load vertically. Use machine to PULL only.	Cable HazardEnsure that load bearing cable is not kinked or knotted.	Winch Cable HazardEnsure that there is a minimum number of cable coils on winching mechanism.
Winch Hook HazardCarry hook to load – do NOT throw or run.	Flash / Blinding HazardWear appropriate eye protection for welding. Direct exposure to weld arcs may cause permanent eye injury.	Laser HazardLaser may be in use – do NOT look directly at laser or allow others to.	Choking HazardChildren under 8 yrs. Can choke or suffocate on small parts. Adult supervision required.

Table of Contents

Safety 2

Safety Symbols....5

Parts Identification 8

Assembly....9

Operation....11

Wet Vacuum – Cleaning....11

Dry Vacuum – Cleaning....12

Maintenance....13

Specifications ....14

Parts Identification

No.	Name	No.	Name
1	Main unit	6	Car head
2	Vacuum tube	7	Carpet head
3	Wheels	8	Extension tubes
4	Wheel hubs	9	Assorted screws (quantities may vary)
5	Vacuum bag

Assembly

Close-up of hands installing a black plastic component with a coiled cable, no visible text or symbols

Close-up of hands assembling a black mechanical component with a circular base, no visible text or symbols

Close-up of a mechanical component with metallic parts and a bracket, no visible text or symbols

Close-up of a mechanical component with a circular indicator (labeled 4) and a star-shaped base, no visible text or symbols.

Blower Assembly

Close-up of a hand holding a black plastic clip with red handle, no visible text or symbols

Close-up of a hand holding a red plastic object, possibly a shoe or cushion (no visible text or symbols)

Vacuum Assembly

Close-up of a hand pressing a black mechanical component on a wooden surface (no visible text or symbols)

Close-up of a hand pressing down on a black mechanical component (no visible text or symbols)

Close-up of a person wearing a black jacket and beige pants, holding a cylindrical object (no visible text or symbols)

Close-up of a hand holding a black cylindrical object, possibly a tool or device, with no visible text or symbols.

Person wearing beige pants and black jacket holding a black cylindrical device, standing on carpet (no visible text or symbols)

Operation

Wet Vacuum – Cleaning

Abstract black-and-white illustration with wavy lines, swirls, and irregular shapes (no text or symbols)

Illustration of a person interacting with a computer screen displaying a globe (no text or symbols visible)

Diagram of a mechanical device with arrows indicating upward motion (no text or symbols)

Silhouette of a person stepping on a surface with number 3 visible (no text or symbols)

Illustration of a hand holding a computer monitor displaying a cartoon character (no text or symbols)

Illustration of a bucket pouring liquid into a container (no text or symbols)

Illustration of a hand washing a cup with chopsticks (no text or symbols)

1. Unplug before changing the filter (Figure 1).
2. Pull the supplied foamed plastic filter over the filter basket (Figure 2) for wet vacuum-cleaning.
3. Insert the plug and turn ON the switch, then appliance starts to work (Figure 4 & 5a or 5b).
4. When pushing the switch to the "I" position, the vacuum cleaner will work; when pushing the switch to the "O" position, the vacuum cleaner will turn OFF.
5. In some models: When pushing the switch to the "I" position, the vacuum cleaner will work alone; when pushing the switch to the "O" position, the vacuum cleaner will turn OFF.
6. In some models: When pushing the switch to the "II" position, while the tool which is connected to the socket, the vacuum cleaner will also work 3-5 seconds later, while the tool stop working, the vacuum cleaner will also stop working.

The dust bag included is not suitable for wet vacuum-cleaning!

Dry Vacuum – Cleaning

Abstract line drawing of stylized figures and swirls without any text or symbols

Illustration of a person interacting with a computer monitor displaying a globe (no text or symbols visible)

Diagram of a car interior with no visible text or symbols

Diagram of a mechanical component with a dome-shaped top and a cylindrical base, showing directional arrows (no text or symbols)

Illustration of a hand holding a magnifying glass over a screen (no text or symbols visible)

Abstract diagram with circular elements and curved lines, no readable text or symbols

1. Unplug before changing the filter (Figure 1), then take out the bag and empty the dust or replace the bag. Slip the dust bag onto the socket (figure 2) for dry vacuum-cleaning.
2. Insert the plug and turn ON the switch, the appliance will start to operate (Figure 5 & 6a or 6b).
3. When pushing the switch to the "I" position, the vacuum cleaner will work; when pushing the switch to the "O" position, vacuum cleaner will turn OFF.
4. In some models: When pushing the switch to the "I" position, the vacuum cleaner will work alone; when pushing the switch to the "O" position, vacuum cleaner will turn OFF. When pushing the switch to the "II" position, while the tool which is connected with the socket, the vacuum cleaner will also work 3-5 seconds later, while the tool stop working, the vacuum cleaner will also stop working.

The dust bag is suitable only for dry vacuum-cleaning!

Maintenance

Illustration of a hand interacting with a computer monitor displaying a speech bubble (no text or symbols present)

Illustration of a hand holding an arm, with no visible text or symbols

Illustration of a mechanical device with gears and levers (no text or symbols)

Illustration of a person sitting on a boat with waves, no text or symbols present

Illustration of a stylized building with arched windows and a tree (no text or symbols)

• Unplug before maintenance (Figure 1).
• Take off the foamed plastic filter (Figure 3) and wash carefully with clean water (Figure 5).

IMPORTANT: Do not use detergents to clean the filter. The filter must be thoroughly dry before the machine is used.

Specifications

Function	Wet and dry vacuuming / blowing
Voltage	220-240V
Frequency 50/60Hz
Capacity 20L
Power 1200W
Certification CE, EMC, GS, ROHS
Tank diameter 29cm
Material of Tank Polypropylene
Airflow rate 28L/sec
Vacuum suction Over 17Kpa
Hose diameter 32mm
Hose length 1.5m
Power Plug 10A Australian Standard (SAA Approved)

Some experts believe that the incorrect or prolonged use of almost any product may cause serious injury or death. To help reduce your risk of serious injury or death, refer to the information below. For more information, see www.datastreamserver.com/safety

• Consult all documentation, packaging, and product labelling before use. Note that some products feature documentation available online. It is recommended to print and retain the documentation.
  ■ Before each use, check the product for loose/broken/damaged/missing parts, wear, or leaks (if applicable). Never use a product with loose/broken/damaged/missing parts, wear, or leaks.
  ■ Products must be inspected and serviced (if applicable) by a qualified technician every 6 months. This is based on average residential use by persons of average size and strength, and on a property of average metropolitan size. Use beyond these recommendations may require more frequent inspections/servicing.
  ■ Ensure that all users of the product have completed a suitable industry recognised training course before being allowed access to the product.

The product has been supplied by a general merchandise retailer that may not be familiar with your specific application or description of application. Be sure to attain third-party approval from a qualified specialist for your application before use, regardless of any assurances from the retailer or its representatives.
This product is not intended for use where fail-safe operation is required. As with any product (for example, automobile, computer, toaster), there is the possibility of technical issues that may require the repair or replacement of parts, or the product itself. If the possibility of such failure and the associated time it may take to rectify could in any way inconvenience the user, business, or employee, or financially affect the user, business, or employee, then the product is not suitable for your requirements. This product is not intended for use where incorrect operation or a failure of any kind, including but not limited to, a condition requiring product return, replacement, parts replacement, or service by a technician may cause financial loss, loss of employee time or an inconvenience requiring compensation.
If this product has been purchased in error when considering the information presented here, contact the retailer directly for details of their returns policy, if required.

edisons

.com.au

©2023 Baumr-AG. All rights reserved. No part of this document, including descriptive content, concepts, ideas, diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system, without express permission or consent from the publisher.