SET 8200 - Microphone Karma - Free user manual and instructions

USER MANUAL SET 8200 Karma

SET 8200 SET 8200LAV SET 8202 SET 8202LAV SET 8202PL

Radiomicrofoni Wireless microphones

• OTROS IDOMAS •
• OUTRAS LINGUAS •

MANUALE Instructions

When you open the package check that product is in good condition and that all the parts are present. Immediately notify the seller if any part is damaged or missing.

CE

Hereby, KARMA ITALIANA SRL declares that the radio equipment type Wireless Microphone SET 820X serie is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.karmaitaliana.it.

Karma Italiana Srl

WARNING: In the countries indicated in the below chart the operating frequencies of this product might be not authorized, be subject to local restrictions or limitations of use, require a general authorization or an individual license for use. Please contact your telecommunications authority for detailed information about authorized frequencies and ERP power levels in your country or your region for wireless microphones.

AT	BE	BG	CH	CY	CZ	DE
DK	EE	EL	ES	FI	FR	HR
HU	IE	IS	IT	LI	LT	LU
LV	MT	NL	NO	PL	PT	RO
SE	SI	SK	TR	UK(NI)

The manufacturer, in order to improve its products, reserves the right to modify their characteristics whether technical or aesthetic, at any time and without notice.

GRAZIE PER IL VOSTRO ACQUISTO

The product you have purchased is the result of careful planning by specialized engineers. High quality materials were used for its construction, to ensure its functioning over time.

The product is manufactured in compliance with the strict regulations imposed by the European Union, a guarantee of reliability and safety.

Please read this manual carefully before starting using the device in order to take advantage of its full potential.

Hoping that you will be satisfied of your purchase, we thank you again for your trust in our brand and we invite you to visit our website www.karmaitaliana.it where you will find the whole range of our products, along with useful information and updates.

This manual is referred to the models with 1 or 2 microphones of series SET 820X and their versions.

CAUTIONS AND WARNINGS

• Read and follow strictly the instructions contained in this manual.
• Keep this manual for future reference and include it if you give the product to another user.
• Do not open or take apart the device and don't make changes to it.
  • The installation of the product must be carried out exclusively by skilled persons.
  In case of wrong installation or connections, the manufacturer doesn't take any responsibility for damages to people or objects.
• Before making any connection with other devices, check that all the fixtures are turned off and disconnected from the power source.
• The product is not suitable for outdoor use. To avoid the risk of shortcircuits don't expose it to high temperatures (above 40°), rain or humidity.
  • Do not allow flammable liquid, water or metal objects to enter the product.
  • Don't touch the product with wet hands.
• Do not place any recipients filled with liquids, such as vases, on top of or directly next to the appliance.
  • Install the product in a stable and ventilated position, far from heat sources and don't obstruct the air vents.
• Use the fixture, its controls and the accessories with due accuracy, avoiding falls, vibrations or impacts.
• In the event of a serious operating problem, stop using the product immediately. Never try to repair it by yourself, but contact the authorized technical service center. Repairs carried out by unskilled persons could lead to serious damages both to the fixture and to people.
  • Do not turn the product on and off at short intervals, it may reduce the life of the device.
• Disconnect the unit from power when it is not used.
• Do not cut, kink, otherwise damage nor modify the power adaptor's cable and periodically check that it is in good condition.
  • Wait for the product to cool before cleaning or maintenance.
  • To clean the product, use only a damp cloth, avoiding solvents or detergents of any kind.
  • If the product is used in the presence of children they must be supervised.

This symbol alerts you of the presence of important operating and maintenance instructions, in the manual or in the documentation accompanying the product

This symbol indicates a risk of electric shock in case of wrong use or alteration of the product.

The CE mark indicates that this product complies with the applicable European directives and their related standards. Compliance documentation in complete form is available at the company Karma Italiana Srl

Directive 2012/19/UE regarding electric and electronic equipment waste (WEEE).

The symbol of the crossed-out dustbin indicates that the product at the end of its life must be collected separately from other waste. The user must, therefore, confer the fixture complete with all the essential components to an authorized disposal center for collection of electronic and electrical waste, or return it to the dealer when buying new equipment of equivalent type, at a rate of one to one, or one to zero if external dimension is less than 25cm. Appropriate separate collection to send the decommissioned equipment to recycling, treatment and environmentally compatible disposal helps to prevent negative impact on the environment and human health and promotes recycling of the materials making up the product. In Italy illegal dumping of the product by the user entails the application of administrative sanctions pursuant to Legislative Decree n. 49 (14/03/2014).

This device is powered by batteries subject to European Directive 2013/56/EU, which cannot be disposed of with normal domestic waste. Find out about the local regulations regarding the separate collection of batteries: a correct disposal allows to avoid negative consequences for environment and health

WARRANTY CONDITIONS

The product is covered by warranty according to current national and European regulations.

For detailed warranty conditions and RMA requests please refer to our website: www.karmaitaliana.it.

• The warranty covers manufacturing defects and faults occurred in the first 2 years from the date of purchase. In case of purchase with invoice, the warranty is limited to 1 year.
  • Damages caused by negligence or wrong use of the device are not covered by warranty.
  • The warranty is no longer effective if the item is modified or disassembled by not authorized people.
  • This warranty doesn't necessarily envisage the product's replacement.
• External components, batteries, knobs, switches and any removable or subject to wear and tear parts are excluded from warranty.
• Shipment for the return of faulty items is at expense and risk of the owner.
• For all intents and porpuses the warranty is effective only upon exhibition of the invoice or of the purchase receipt.
• If you send the product for repair, it must be shipped with complete original packaging: we therefore recommend to save it.

We also suggest to register your product on our website www.karmaitaliana.it, after signing in to access the reserved area. In this way you will have the possibility to keep track of the warranty validity and to receive updates on our items.

Front and back panel

(SET 8200 - SET 8200LAV)

Front and back panel

(SET 8202 - SET 8202LAV - SET 8202PL)

1. ON/OFF BUTTON

To turn on/off the fixture.

2. VOL / VOL A

Use it to adjust the volume of wireless microphone (or of the first microphone on SET 8202 series).

3. VOL B

Use it to adjust the volume of the second microphone (only on SET 8202 series).

4. DISPLAY

It shows information on current functions.

5. ANTENNAS

Point them upwards for best signal reception.

6. POWER SOCKET

Connect the cable of the included power adaptor to this Type C socket.

7. XLR SOCKET

It's the wireless microphone balanced output, which can be connected to mixers or amplifiers using a cable with XLR connectors.

8. 6,3 mm SOCKET

It's the wireless microphone's unbalanced output, which can be connected to mixers or amplifiers by means of a cable with 6.3mm mono connectors. In the dual version (SET 8202 series) the mixed signal of the two transmitters will be available on this output.

SOME SUGGESTIONS

Avoid using the wireless microphone near possible sources of radio interference such as transmitting antennas or high voltage cables.

Always check the charge status of the transmitters' batteries. A bad reception is often due to the batteries close to discharge.

Avoid placing the microphone near speakers or loudspeakers as it could trigger annoying whistling (larsen effect).

If possible avoid using the wireless microphones in environments with thick walls between the transmitter and the receiver. In open space wireless microphones are able to operate at considerable distances.

In case of signal dropouts try to move the microphone even just a few centimetres.

Your new wireless microphone is endowed with several channels that can be changed to avoid local interferences. If you need to use more than one SET (2 microphones) at the same time, it will be necessary to carry out a particular operation, to lock the frequency of each microphone on the related base, in order to use several microphones set on different channels. This will prevent the frequencies from changing when the microphones are turned off and turned on again.

Procedure:

• Make sure that base and microphones are off.
• Turn on the microphone by pressing the power (B or H) and frequency change (E or K) buttons together until the display flashes.
• Turn on the base and wait around 4 seconds.
• Press once the frequency change button (E or K). The microphone's display will stop flashing and the same frequency will soon after appear on the base.
• Repeat the procedure for the second microphone and for the other sets.

Handheld Microphone

Bodypack with Headset

• Before using the handheld microphone unscrew the cover C and insert the batteries.
• If you use a bodypack open the cover (J) and insert the batteries in the compartment.
• Each transmitter can be connected only to its own receiver. The transmitter and its receiver base must have the same frequency to work together.
• After turning on the receiver base, press the (B) button to turn on the transmitter. The display (A) will show main information.
- You can choose and set one of the 16 available frequencies. To do this remove the handheld mic's (C) or the bodypack's battery cover (J) and press the button (E). At each click the frequency will be changed also on the receiver base. In case of interferences try to change the operating frequency.
- In the version with dual handheld mic, you can distinguish the microphones from the colour of the cap on the bottom of the battery cover (D).
- In the bodypack version before use you have to connect the headset microphone (L) to the transmitter via the (G) socket. During use take care that the antenna (F) is lifted for best transmission.

TECHNICAL SPECIFICATIONS

	SET 8200	SET 8202
Power supply	5V --- via power adaptor	5V --- via power adaptor
Power adaptor	Input 100-240V ~/50-60HzOutput 5V ---	Input 100-240V ~/50-60HzOutput 5V ---
Operating range	50 m	50 m
Channel	16	16
Frequency band	UHF	UHF
Frequency range	679,10 - 694,10 MHz	CH A: 679,10 - 694,10 MHzCH B: 663,10 - 678,10 MHz
Sensitivity	-96 dbm	-96 dbm
Frequency response	30 Hz - 20 Khz	30 Hz - 20 Khz
Receiver's output impedance	600 Ohms	600 Ohms
Transmitters' power supply	2 x AA 1,5V batteries (not included)	2 x AA 1,5V batteries (not included)
Receiver's dimensions	175 x 40 x 120 mm	175 x 40 x 120 mm
Weight	1,2 kg	1,3 kg

COMPOSITION

SET 8200	n°1 Receiver base WR 8200n°1 Handheld wireless microphone MW 8200
SET 8200LAV	n°1 Receiver base WR 8200n°1 Bodypack MW 8201 with headset
SET 8202	n°1 Receiver base WR 8202n°2 Handheld wireless microphones MW 8200
SET 8202LAV	n°1 Receiver base WR 8202n°2 Bodypacks MW 8201 with headset
SET 8202PL	n°1 Receiver base WR 8202n°1 Handheld wireless microphone MW 8200n°1 Bodypack MW 8201 with headset

KARMA

Prodotto da/ produced by:

KARMA ITALIANA SRL

Via Gozzano 38 bis

21052, Busto Arsizio (VA) - Italy

Ver. 24.2

Made in China