MBX700 - Multi-outil MTM - Free user manual and instructions
Find the device manual for free MBX700 MTM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Multi-tool |
| Brand | MTM |
| Model | MBX700 |
| Material | Stainless steel |
| Dimensions (folded) | Approx. 10.5 cm (4.1 in) length |
| Weight | Approx. 200 g (7 oz) |
| Tools included | Needle-nose pliers, wire cutter, large blade, small blade, scissors, bottle opener, can opener, screwdriver bits (Phillips and flat), awl, ruler |
| Blade steel | 420 stainless steel |
| Handle material | Stainless steel with textured grip |
| Locking mechanism | Liner lock on blades |
| Security feature | Locking blades for safe use |
| Maintenance | Clean with dry cloth, oil pivot points occasionally |
| Warranty | Limited lifetime warranty |
| Included accessories | Nylon belt sheath |
Frequently Asked Questions - MBX700 MTM
How do I sharpen the blades on my MTM MBX700 multi-tool?
Use a fine-grit sharpening stone or a ceramic rod. Hold the blade at the factory bevel angle (approx. 20 degrees) and draw the blade across the stone in a smooth motion. Repeat on both sides for a sharp edge.
Is the MTM MBX700 multi-tool TSA approved for carry-on luggage?
No, multi-tools with blades are generally not allowed in carry-on luggage. Please place it in your checked baggage to comply with airline regulations.
How do I clean and maintain my MTM MBX700?
Clean with a dry cloth to remove dirt and moisture. For sticky residues, use a mild detergent. Apply a drop of light oil (e.g., 3-in-1 oil) to pivot points periodically to ensure smooth operation.
What is the warranty on the MTM MBX700?
MTM offers a limited lifetime warranty against defects in materials and workmanship. Keep your receipt for warranty claims. Normal wear and tear, misuse, or modifications are not covered.
Can I replace the screwdriver bits on the MBX700?
The screwdriver bits are integrated into the tool and are not user-replaceable. If they become damaged, the entire tool may need to be replaced under warranty.
How do I unlock the blades for use?
The blades feature a liner lock. To open, pull the blade out from the handle until it locks into place. To close, press the liner lock bar to the side (usually on the back of the handle) and fold the blade back in.
Is the MTM MBX700 rust-resistant?
The stainless steel construction offers good corrosion resistance. However, it is not rust-proof. Rinse and dry the tool after exposure to saltwater or harsh chemicals, and store it in a dry place.
How many tools are included in the MBX700?
The MBX700 includes 12 tools: needle-nose pliers, wire cutter, large blade, small blade, scissors, bottle opener, can opener, Phillips screwdriver, flathead screwdriver, awl, ruler, and lanyard hole.
Can I use the MTM MBX700 for heavy-duty tasks?
The MBX700 is designed for moderate tasks like cutting, screwing, and opening. Avoid using pliers or cutters on hardened steel or excessive force, as it may damage the tool.
How do I contact MTM customer support?
Visit the official MTM website and navigate to the 'Support' section for contact information. You may also reach out to the retailer where you purchased the tool.
User questions about MBX700 MTM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multi-outil in PDF format for free! Find your manual MBX700 - MTM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MBX700 by MTM.