PureJet HDFY90H - Tumble dryer HISENSE - Free user manual and instructions

Product Type	Tumble Dryer (Heat Pump Condenser)
Brand	Hisense
Model	PureJet HDFY90H
Capacity	9 kg
Power Supply	220-240 V~, 50 Hz
Rated Power	700 W
Dimensions (W × D × H)	595 × 685 × 845 mm
Net Weight	54 kg
Refrigerant	R134a (355 g)
Drying Programs	14 programs: Cotton, Synthetics, Delicates, Towels, Bedding, Downwear, Sportswear, Auto Dry, Baby Care, Allergy Care, Refresh, Wool, Quick 30', Rack Dry, Time Dry
Sensor Dry	Yes (for most programs)
Time Dry	Yes
Anti-crease Function	Yes (up to 12 hours)
Delay End	Yes (up to 24 hours)
Child Lock	Yes
Mute Function	Yes
Drum Light	Yes (automatic 1 minute)
Lint Filter Cleaning	After each use
Heat Exchanger Cleaning	Periodically
Water Disposal	Built-in water box or optional direct drain
Stackable	Yes (with Hisense washing machine, 486 mm side plate)
Accessories Included	Drying rack, drain pipe, stacking kit, foot caps

Frequently Asked Questions - PureJet HDFY90H HISENSE

What is the maximum capacity of the Hisense PureJet HDFY90H?

The maximum dry load capacity is 9 kg for cotton and other fabrics, though some programs have lower limits (e.g., Synthetics 4.5 kg, Delicates 1 kg).

How do I clean the lint filter?

Open the door, remove the filter from the front support, open it, and clean fluff with a wet cloth or running water. Dry thoroughly before reinstalling. Clean after each use for optimal performance.

Can I stack the dryer on a washing machine?

Yes, but only on a Hisense washing machine with a 486 mm side plate. Use the provided stacking kit and follow the installation instructions. Two or more people are required for safety.

What should I do if the dryer does not start?

Check the power connection, ensure the door is closed properly, press the Start/Pause key, and verify the house fuse/circuit breaker. If the display shows 'End', the program may be finished or the drum may be empty.

How do I use the drying rack?

Install the drying rack by hooking it into the front support slots and lower holes. Use it for items like shoes or plush toys and select the Rack Dry program. Remove the rack when not needed.

What does the F40 error code mean?

F40 indicates compressor protection. Turn the knob to 'OFF', wait for the compressor to cool down, then restart. If the error persists, contact after-sales service.

Can I use an extension cord with this dryer?

No. Do not use extension cords, multiple outlet sockets, or double adapters. The dryer must be directly plugged into a grounded outlet.

How often should I clean the heat exchanger?

Clean the heat exchanger periodically (every few months or when performance decreases). Open the lower left door, remove the base filter, and clean lint. Avoid touching the heat exchanger directly.

Is the dryer safe for all fabrics?

No. Always check care labels. Do not dry items contaminated with flammable substances, foam rubber, waterproof textiles, or items with rubber backing. Use appropriate programs for delicate fabrics.

How do I enable the child lock?

After starting a program, press and hold More Time + Less Time simultaneously until the child lock icon lights up. Repeat the same operation to release it.

USER MANUAL PureJet HDFY90H HISENSE

Please read these instructions carefully.

Please keep these instructions properly for future reference.

Thank you very much for choosing our products.

Please install and use this product correctly. The pictures in the manual are schematic diagrams, and the appearance and printing shall be subject to the actual products. The product is subject to technical changes without prior notice for overall performance improvement. This dryer is intended solely for household use. Please do not use it to dry clothes that are not suitable for machine wash.

The symbols used in this manual are as follows:

Warning

It is used for matters related to safety and may cause personal injury.

Warning

Risk of fire / Flammable materials

Read the instructions.

Contents

1. Safety information Safety information.... 02
2. Product and Accessories Name of parts....11 Attached accessories....11
3. Installation Method Precautions before installation.... 12 Adjustable foot.... 12 Installation of the drain pipe.... 13 Drying rack.... 13 Power supply connection.... 14 Stacked installation.... 14
4. Drying Instructions Tips for clothes drying.... 16 Preparation before clothes drying.... 16 Sorting the clothes.... 17
5. Method of Use Control panel and functions....18 Program guide....20
6. Maintenance Exterior of the dryer....22 Door seal....22 Cleaning of lint and debris filter screen....22 Cleaning of water box....23 Cleaning of heat exchanger....23
7. Troubleshooting Troubleshooting.... 25 Information codes.... 27
8. Disposal Disposal....28
9. Machine parameters Machine parameters....29

1. Safety information

Carefully read the instructions for use before using the dryer. Do not use the dryer without reading and understanding these instructions for use first. These instructions for use of a dryer are supplied with different types or models of dryers. Therefore, they may include descriptions of settings or equipment that are not available in your dryer. Failure to observe the instructions for use or inappropriate use of the dryer may result in damage to the laundry or the appliance, or injury to the user. Keep the instruction manual handy, near the dryer. - Your dryer is intended solely for household use. If the dryer is used for professional, for-profit purpose or purpose exceeding normal use in a household, or if the dryer is used by a person who is not a consumer, the warranty period shall be equal to the shortest warranty period required by relevant legislation. The dryer is made in compliance with all relevant safety standards.

WARNING:

To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons when using this product, follow basic precautions, including the following.

Installation

• Follow the instructions for correct installation of the Hisense dryer and connection to the power mains.
• For appliances with ventilation openings in the base, a carpet must not obstruct the openings.
• The appliance must not be installed behind a lockable door, a sliding door or door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted.
• All and any repairs or maintenance tasks on the dryer should only be done by trained experts. Unprofessional repair may result in an accident or major malfunction. To avoid danger, a damaged power cord may only be replaced by the manufacturer, a service technician, or an authorized person. After installation, the dryer should stand still for two hours before it is connected to the power mains.
• At least two persons are required to install the tumble dryer on top of a washing machine.
• Install the dryer in a room with adequate ventilation and a temperature between 10°C and 25°C. Always use the ducts or hoses supplied with the dryer.
• Place the dryer on a level and stable solid (concrete) base.
• Do not place the dryer behind lockable or sliding door, or door with a hinge on the opposite side of the dryer door hinge. Install the dryer in such way that the door can always be freely opened.
• Never block the air exhaust (evacuation opening).
• Do not place the dryer on a carpet with long fibres as this may impede air circulation.
• Air in the dryer environment should not contain dust particles. The air where the dryer is installed should be thoroughly ventilated to prevent reverse flow of gases released from the gas appliances with open fire.
• The appliance may not be in contact with a wall or adjacent furniture.
• This appliance must not be stored or used in any outdoor location.

Electrical safety

- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

- The dryer may not be connected to the power mains using an extension cord.

- Do not connect the tumble dryer to an electrical outlet intended for an electric shaver or a hair dryer.

- The dryer is protected with an automatic switch-off system in case of overheating. This system will switch off the dryer if the temperature is too high.

- If the net filter is clogged, the overheating automatic switch-off system may be activated. Clean the filter, wait for the dryer to cool down, and try running it again. If the dryer still fails to start, call a service technician.

• Do not use multiple outlet sockets, an extension power cable or double adapter with this appliance.
• This appliance must be earthed via the power cord. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
• Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded.
• This appliance is equipped with a power cord having an equipment-grounding earthing pin and a grounding power plug. The power plug must be plugged into an appropriate outlet socket that is installed and grounded in accordance with all local codes and ordinances.
• Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the outlet socket.
• Do not spray water inside or outside the appliance to clean it.

WARNING:

The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.

Children safety

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Children of less than 3 years should be kept away unless continuously supervised.
• Prevent your children and pets from entering the dryer drum.
• Before closing the dryer door and running the programme, make sure there is nothing except laundry in the drum (e.g. if a child climbed into the dryer drum and closed the door from the inside).
• Do not leave the appliance door open. Children may hang on the door or crawl inside the appliance, causing damage or injury.

Use

• The tumble dryer is not to be used if industrial chemicals have been used for cleaning.
• The lint trap has to be cleaned frequently.
• Do not dry unwashed items in the tumble dryer.
• Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.
• Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
• Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
• Remove all objects from pockets such as lighters and matches.
• Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard.
• If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent - this will reduce, but not eliminate, the hazard.
• In case of a defect, only use approved spare parts by authorized manufacturers.
• If the condensate tube is blocked or clogged, then tumble dryer operation is stopped.
• Before moving the dryer or before storing it in a non-heated room during the winter, the condensate tank has to be emptied.
• Clean the dryer filters after each drying cycle. If you have removed the filters, replace them before the next drying cycle.
• Do not use any solvents or cleaning agents that could damage the dryer (please observe the recommendations and warnings provided by the manufacturers of the cleaning agents).
• Never add chemicals or fragrances into the condensate tank. • After the drying process, unplug the dryer power cord from the power outlet. • The dryer uses a heat pump system to heat the air.
• The system consists of a compressor and a heat exchanger. When the dryer is started, compressor operation (the sound of flowing liquid) or flow of refrigerant may be louder as long as the compressor operates. This is not a sign of malfunction and it will not affect useful life of the dryer. In time and with use of the dryer this noise will become quieter.
• Do not drink or prepare food with the condensed water/distilled water. It can cause health problems to people and pets.
• Remove clothes from the product immediately when drying is complete or the power is turned off during the drying process. Leaving clothes that has been dried in the appliance unattended could result in fire. Clothes not removed from the appliance after drying could result in fire. Remove clothes immediately after drying, and then hang or lay the clothes flat to cool.
• Never attempt to operate the appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
• Do not attempt to separate any panels or disassemble the appliance. Do not apply any sharp objects to the control panel in order to operate the appliance.
• Never reach into the appliance while it is operating. Wait until the drum has completely stopped.
• In case of flood, disconnect the power plug and contact the After-sales Service Center.
• Do not push down on the door, when the appliance door is open.
• Do not touch the power plug or the appliance controls with wet hands.
• Do not bend the power cable excessively or place a heavy object on it.
• Make sure the fibres do not accumulate around the dryer.
• Keep the area underneath and around the appliance free of combustible materials such as fibres, paper, rags, chemicals, etc.

WARNING:

Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.

Maximum Capacity

The maximum capacity of dry textile material to be used in the appliance is:

HDFY80H HDFY90H
8kg 9kg

Danger of hot surface

• At higher drying temperatures, the door glass will heat up. Be careful to avoid burns. Make sure children do not play near the door glass.
• The back of the dryer may get very hot during operation. Wait for the dryer to cool down completely before touching its back side.
• If you open the dryer door during the drying process, the clothes may be very hot and there is a risk of burning.

Service

• In case of incorrect dryer connection, incorrect use, or servicing by an unauthorized person, the user shall bear the cost of any damage as such damage shall not be covered by warranty.
• The warranty does not cover consumables, minor deviations in colour, increased noise that results from appliance age and which does not affect the functionality of the dryer, and aesthetic defects on components, which do not affect the dryer's functionality and safety.

2. Product and Accessories

Name of parts

Attached accessories Instructions × 1

Drying rack × 1

Drain pipe × 1

Footing cap × 4

Stacking kit × 2 Screw × 6

NOTE

- The included accessories vary depending on the model you purchased.

3. Installation Method

The clothes dryer must be properly installed by qualified professionals to ensure use safety. The user shall be responsible for the service caused by poor and incorrect installation.

1). Precautions before installation

Installation environment

◇ If it is installed in an embedded space, please reserve the minimum installation clearance for the dryer:

25 mm at the top, 20 mm at the left and right sides and 50 mm at the back.

Installation requirements

Please install the dryer in a dry and well ventilated place with flat and solid ground. Do not place it on carpet, cardboard, or place with direct sunlight. The working environment temperature of the dryer is 5°C-35°C. Do not place it below 0°C or at a high temperature. The appliance performs best at a room temperature of 23°C. During handling, the inclination angle of the dryer shall not exceed 45°; after handling, it needs to stand for more than 2 hours. ◇ The dryer shall not be placed next to the oven, stove and other high-temperature equipment, nor next to the refrigeration equipment. The back of the dryer must be well ventilated. It is recommended that the clothes dryer and washing machine be placed close to each other to facilitate clothes dehydration after washing dehydration. ◇ Install the appliance on a flat hard floor. Allowable slope under the appliance is 1 degree.

2). Adjustable foot

Press the diagonal on the top of the dryer to confirm whether the dryer is in a stable state. If the dryer shakes, rotate the four adjustable feet at the bottom to adjust them to the appropriate height to ensure that the dryer is in a stable state. ◇ Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the appliance.

3). Installation of the drain pipe

Usually, the condensate water after drying is stored in the water box, and the water box needs to be emptied after each program. If the installation position of the dryer is close to the sewer, or the clothes dryer is stacked on the washing machine, the attached drain pipe can be installed to discharge the water directly to the sewer.

Remove the connecting pipe at the rear of the water box, and install the drain pipe among the attached accessories to this position (as shown in the figure). Please confirm that the installation connector is firmly connected.

Please insert the other end of the drain pipe into the floor drain without twisting or flattening. If the pipe is too long, please cut off the excess part. ◇ The drain pipe shall not be higher than the dryer, otherwise the water cannot be drained. Do not place the drain in accumulated water, which may cause backsuction. ◇ After the drain pipe is installed in place, the condensate water can be discharged directly without emptying the water box after each use.

4). Drying rack

When drying shoes and plush toys, etc., or selecting rack dry, the drying rack can be used. When drying clothes, please take out the drying rack. Installation of drying rack: Please tilt the drying rack to a certain angle with the lower end clamped in the two holes of the filter screen and the upper end hooked in the slot of the front support.

5). Power supply connection

• Ensure that the power supply is consistent with the power requirements of the dryer.
• The dryer must be grounded reliably. Do not use a power strip or multi-purpose socket for secondary connection.

NOTE

• Always unplug the appliance after use.

6). Stacked installation

◇ The dryer can be stacked with a Hisense washing machine with 486mm side plate of the box. When stacking, it shall be fixed with accessories for stacking. Please contact qualified service personnel for installation. ◇ Without stacking accessories, the dryer and washing machine must not be stacked to avoid safety accidents. ☐ For safety reasons, two or more people need to work together to install. The weight of the appliance and the height of the installation makes the installation procedure too risky for one person. ◇ The surface on which the appliance is placed should be clean and level.

NOTE

- Some models are not sold with all of the available accessories, you may need to purchase the stacking kit first if it was not provided with your model. Please contact Hisense After-sales Department for purchase.

Stacking kit

(1) Unscrew the four adjustable feet of the clothes dryer, put them into the foot caps respectively, and then install them back on the clothes dryer. (2) Lift the dryer onto the washing machine and place it in alignment with the washing machine. Do not place the washing machine on the dryer or install it in a staggered manner.

dryer washing machine

(3) Remove one screw connecting the lower rear cover plate and the side plate of the dryer on each side. (4) Align the stacking kit holes and the rear cover holes in a line.

(5) Screw on the removed screw and the same screw in the accessory box to fix the front of the stacking kit on one side. (6) Use the 2 special screws in the accessory box to assemble the washing machine rear cover and stacking kit.

(7) Fix the stacking kit on the other side in the same way.

Stacking bracket (optional accessories)

The clothes dryer and washing machine can also be fixed with a stacking bracket. For the installation method, please refer to the installation instructions attached to the accessories. ◇ Please purchase the optional accessories from the After-sales Department.

4. Drying Instructions

1). Tips for clothes drying

◇ Clothes must be dehydrated before being put into the dryer. In order to save energy, please increase the dehydration speed of washing machine to above 1000 rpm. ◇ Please shake the dehydrated clothes up before putting them into the dryer. In order to achieve ideal drying effect, please classify the clothes by types and select the appropriate drying program. Each program has its maximum load requirements, and do not overload. ◇ After drying clothes, clean the lint and debris filter screen in time. ◇ When drying a small amount of clothes, it is recommended to use a timer program. Do not dry the starched clothes, because the hardening of the starch layer will reduce the drying effect. ◇ Clothes that are easy to fade should be dried separately. A mixed fabric load can cause the drying time to be extended and the time remaining in the display to pause during active drying. The remaining time will then continue when it is the actual time that remains.

2). Preparation before clothes drying

◇ Before drying, please check the clothing tab to confirm whether it is suitable for drying. ◇ Empty your pockets and take out coins, pins, keys and other items to avoid clothing damage. ◇ Zip up the zipper, button up the buttons and tighten the belt. In order to avoid the sound of zippers and buttons during drying, please turn the clothes over before putting them into the dryer. ◇ Check whether the water box is drained off and whether the lint and debris filter has been cleaned and installed in place.

NOTE

• The drying time of clothes will be automatically adjusted according to the following factors: type of clothes, load of clothes, water content after dehydration, and ambient temperature.
• Please be sure to check the clothing tag to ensure that the clothes can be dried to avoid damage to the clothes.
• Drying clothes with different textures and thicknesses at the same time will result in different drying effects.

3) Sorting the Clothes

Clothes have their own fabric care labels, so it is recommended to dry according to the fabric care label. Sort the clothes by size and type of fabric, then prepare the clothes according to the symbols on the fabric care labels.

Symbol	Description
	Dry
	Tumble Dry
	Permanent Press / Crease Resistant
	Gentle / Delicate
	Do not Tumble Dry
	Do not Dry
	High Heating
	Medium Heating
	Low Heating
	No Heating / Air
	No Heating / Air
	Line Dry / Hang to dry
	Drip Dry
	Dry Flat
	In the Shade

5. Method of Use

1) Control panel and functions

(1) Knob

It is used to turn the power on/off. In case of shutdown during operation, rotate the knob to "OFF". The dryer will automatically shut down after the program ends. If there is no operation within 2 minutes in standby mode, the dryer will shut down automatically. It is used for program selection. Please refer to [Program guide] for program introduction.

(2) Start Pause

Press the "Start Pause" key to pause or start the program.

When the program is suspended, the set functions cannot be changed. In case of changing the settings, shut down the dryer and restart for re-selection.

(3) More Time

Before the program starts, this function can add drying time to the program. Press continuously to cycle through the set tap positions. Different programs have different tap position settings.

(4) Less Time

Before the program starts, this function can reduce drying time of the program. Press continuously to cycle through the set tap positions. Different programs have different tap position settings.

(5) Anti crease

- If the clothes cannot be taken out in time after drying, select the anti-crease program. At this time, the inner drum rotates intermittently to prevent clothes from creasing.

- Touch any key or open the door to exit the anti-crease mode. If there is no operation, the longest execution will end automatically after 12 hours by default.

(6. Dry level)

- For selection of drying effect. The default option is [ ], and press the dry level key to select.

[☀️] means the clothes can be stored after drying. [2] means the clothes has a small amount of water and can be ironed. [ ] means the clothes can be worn immediately after drying.

(7. Delay End)

This function can delay the end time of the program. - Make an appointment after selecting programs and functions. Press the appointment button to add or reduce the appointment time. The time changes by 1 hour for each press, and the maximum optional time is 24 hours. The appointment time is the end time of the program, including the running time of the whole program, so the appointment time must be longer than the running time of the program. - During the appointment process, the appointment icon is lit up. After the appointment process ends, the appointment text goes out. - Before the program starts, the selected appointment can be canceled by selecting other programs or function keys. - After the program is started, in case of canceling the appointment, shut down and restart the dryer.

(8. Child Lock)

In order to avoid children's misoperation and protect children's safety, this dryer is equipped with child lock.

After the program is started, press and hold "More Time+Less Time" simultaneously, the child lock will be enabled and the child lock icon will be lit up. The child lock can be released by the same operation. After the child lock function is set, other function keys are locked. In case of program ends or restart after power-off, the child lock function set remains. After the child lock function is enabled: Press the "Start Pause" key to cancel the prompt in case of prompt for lint and debris cleaning. During running in anti-crease mode, the child lock needs to be released manually, and the anti-crease function ends automatically.

(9. Mute)

• It is used to turn on/off the beep, except the alarm tone.
• After standby or startup, press and hold "Less Time+Anti Crease" key to turn on/off the mute function. The mute function will not be released automatically in case of end of program or power-off.

(10. Display)

It is used to display the remaining time, appointment time, fault code and other information of the program. The time displayed by the program may be different from the actual running time. Due to the influence of type of clothes, load of clothes, water content after dehydration, and ambient temperature, the actual drying time will be automatically adjusted. - When the program ends, "End" will be displayed.

Icon description

	Appointment icon. When the icon is lit up, it indicates that the appointment function is enabled.
	Anti crease icon. When the icon is lit up, it indicates that the anti crease function is enabled.
	Lint and debris cleaning icon. The flashing icon indicates that the lint and debris needs to be cleaned.
	Water box cleaning icon. The flashing icon indicates that the water box needs to be emptied.

(11). Other functions

Drum light

This dryer is equipped with a drum light. In the states of standby, operation (rotate the knob, press any key or open the door), pause, and program ends, the drum light will automatically illuminate for 1 minute and then turn off automatically, so that the drum interior can be seen.

Stop when the clothes are dry

This dryer stops when the clothes are dry. When the load of clothes is small, it is likely that the program is not completed but the clothes have been dried, at this time, the program will end automatically to save energy.

2). Program guide

NOTE

• Users can choose the appropriate program according to their habits. If the clothes are not completely dried, additional drying of timer program can be selected.
• When drying large fabrics such as bed sheets and quilt covers, due to large load, they may be wrapped into clusters, affecting the drying effect. Please take them out and

shake them up before putting them into the dryer to continue drying.

When drying down clothes, please turn out the inner side of the clothes before drying.

Sensor dry programs

Programs	Type of clothes	Maximum capacity (kg)
		HDFY80H	HDFY90H
cotton	For drying cotton and linen fabrics.· Energy efficiency test program: cotton, Dry level (press once)	8	9
synthetics	For drying chemical fibers clothes.	4	4.5
Delicates	For drying underwear.	1
Towels	For drying towels.	4
Bedding	For drying bedclothes.	2.5
Downwear	For drying machine washable down clothes.	2
Sportswear	For drying sportswear.	2
Auto Dry	For drying mixed clothes of different materials.	4	4.5
Baby Care	For drying children's clothes.	2
Allergy Care	For removing allergens such as mites.	2

Manual and special dry programs

Programs	Type of clothes	Maximum capacity (kg)
		HDFY80H	HDFY90H
Refresh	For refreshing and deodorizing a small amount of dry clothes.	/
Wool	For drying wool clothes.	1
Quick 30'	For quick drying of light and thin clothes.	0.5
Rack Dry	For drying with a drying rack.	/
Time Dry	For drying clothes with timing.	/

6. Maintenance

Regular maintenance can prolong the service life of the dryer. Be sure to cut off the power supply before maintenance.

1). Exterior of the dryer

◇ Clean with a soft wet cloth and wipe the body surface with a non-corrosive household cleaner.

◇ Then, dry it with a soft dry cloth.

2). Door seal

◇ Check the door seal regularly and clean it with wet cloth if necessary.

◇ After use, open the door slightly for ventilation and drying.

3). Clean the lint and debris filter screen

◇ Excessive fluff accumulated on the filter screen will affect the drying effect. Please clean the filter screen after each use.

◇ After cleaning, be sure to reinstall the filter screen in place before use.

1. Open the door and take out the filter screen from the front support.

2. Open the filter screen and clean the fluff of the two-layer filter screen with a wet towel or flowing water.

3. After drying the filter screen, reassemble it.

4. Install the filter screen to the front support.

Notes:

There is a temperature sensor at the bottom of the front support. After the lint and debris filter screen is taken out, please be careful not to touch it to avoid scratching. When reinstalling the filter screen, install it in the correct direction and at the correct position. Do not use this dryer when the filter screen is not installed correctly.

4). Cleaning of water box

If the drain pipe is not installed, the condensate water after drying is stored in the water box. Please drain it off in time after the program ends. During running, if the water box is full, the display flashes for a prompt; please empty the water box immediately. The condensate water is not edible.

1. Take out the water box horizontally to avoid spillover of condensate water.

1. Dump the condensate water and reinstall the water box in place.

5). Cleaning of heat exchanger

Please clean the heat exchanger regularly, otherwise the performance of the dryer will be affected.

1. Press the buckle of the heat exchanger door cover at the lower left to open the door cover.

1. Turn the locking knob of the base filter cover to the unlock position.

1. Remove the base filter cover and take out the base filter.

After several times of use, clean the dust on the base filter with a wet cloth or flowing water. After using for a period of time, if there is dust on the heat exchanger, please remove the dust with tools. Do not touch the heat exchanger directly with your hands to avoid injury.

1. Install the cleaned filter and filter cover back to their original positions, lock the knob, and close the heat exchanger door cover.

7. Troubleshooting

When the machine fails to operate normally, it may not be a fault. Please refer to the following methods for troubleshooting. If the fault still exists after self-handling according to the recommended method, please unplug the power supply and contact us for after-sales service.

All consequences caused by maintenance by the user himself or by hiring non-professional after-sales personnel will be borne by the user.

Fault phenomenon	Recommended handling method
The dryer cannot be started	◇ Check the power connection;◇ Confirm the "Start Pause" key is pressed down;◇ Confirm the door is closed properly;◇ House fuse is blown, circuit breaker has tripped, or power outage has occurred.
The dryer cannot be started and displays "End"	◇ Check whether the program setting is correct;◇ Confirm there are clothes in the drum;
Excessive drying time	◇ Check whether the program setting is correct;◇ Confirm whether there are too many clothes wrapping into clusters;◇ Check whether the filter screen is cleaned;◇ There will be air supply for cooling after drying in some programs;
Poor drying effect	◇ Confirm that the clothes have been dehydrated;◇ Check whether the program setting is correct;◇ Confirm that there are too many clothes;◇ Load is not properly sorted. Whether clothes that are not easy to dry are mixed with clothes that are easy to dry;◇ Large load of heavy fabrics.◇ Check whether the filter screen is cleaned;
The remaining time of the display stops or jumps	◇ The remaining time varies with clothing type, load, dehydration and ambient temperature, which is a normal phenomenon;
Clothes are wrinkled.	◇ Clothes have dried too long. Try a shorter drying time.◇ Clothes have been left in the appliance for too long after cycle ends.
The dryer is too loud.	Look for coins, loose buttons, nails, and other objects and remove them immediately.Check the lint filter. Remove any items stuck inside the lint filter.Make sure the dryer is level and standing firmly on the floor.The dryer may hum due to air moving through the drum and fan. This is normal.
Clothes are shrinking.	Garment care instructions are not being followed. Use a low or no heat setting.
Lint Is left on clothes.	Lint filler has not been cleaned properly.Clothes have not been sorted properly.Some fabrics cause more lint and should be dried separately from fabrics that lint attaches easily.Tissue, paper, etc., has been left in pockets.
The appliance has an odour.	The smell is caused by rubber material that is attached to the appliance inside. This kind of smell is a rubber's own smell and disappears automatically after using the appliance several times.When washing the clothes, use the detergent in accordance with the manufacturers recommendations. If you use the detergent excessively not according to the recommendations, undissolved detergent may accumulate on the clothes and cause an odour.You can smell odours from the clothes if the clothes were left in the appliance after drying or in the washing machine after washing. Unload the clothes promptly at the end of the drying or washing cycle.Ensure you can smell same odour in the washing machine. If so, clean the tub of the washing machine referring to the washing machine user manual.Always take care of both lint filters clean. If any residues were left in the lint filter after drying, it may cause odours. And also dry the lint filter completely after cleaning.

Information codes

Code	Interpretation	Recommended handling method
F40	Compressor protection	Rotate the knob to "Off" to shut down the dryer, and restart it after the compressor cools down.If the abnormality is not removed, please contact after-sales service.
F41	Abnormal drain pump or float switch	Check whether the drain pipe is frozen, knotted or blocked.Check whether the drain pump is blocked.If the abnormality is not removed, please contact after-sales service.
F50/F51	Abnormal sensor	Please contact after-sales service.
F21	Abnormal display panel and the power board	Rotate the knob to "Off" to shut down the dryer, and restart it after 10 seconds.If the abnormality is not removed, please contact after-sales service.

8. Disposal

Packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately.

The symbol on the product or its packaging indicates that the product should not be treated as normal household waste. Take the product to an authorized collection centre for waste electric and electronic equipment processing.

When disposing of the dryer at the end of its useful life, remove all power cords, and destroy the door latch and switch to prevent the door from locking or latching (child safety).

Correct disposal of the product will help prevent any negative effects on the environment and health of people, which could occur in case of incorrect product removal. For detailed information on removal and processing of the product, please contact the relevant municipal body in charge of waste management, your waste disposal service, or the store where you bought the product.

9. Machine parameters

Product Model Parameter	HDFY80H HDFY90H
Appearance color	White	White
Power	220-240V~ 50Hz	220-240V~ 50Hz
Rated capacity	8.0kg	9.0kg
Rated power	800W	700W
Overall dimension (W × D × H)	595x685x845(mm)	595x685x845(mm)
Net weight	54kg	54kg
Refrigerant	R134a	R134a
Charge	300g	355g