KAWATCHWINA - Watch Kogan - Free user manual and instructions

Product Type	Dual Automatic Watch Winder and Storage Box
Brand	Kogan
Model	KAWATCHWINA
Power Input	AC 100-240V, 50/60Hz (via included adapter)
Rotation Modes	5 modes: ON/OFF, clockwise 2min/6min, counter-clockwise 2min/6min, alternating 2min/6min, alternating 5min/5min 3h/9h
Door Sensor	Yes - stops motor when lid is opened
Operating Temperature	-19°C to 45°C
Accessories Included	AC Adapter
Dimensions (approx.)	25 x 20 x 15 cm (9.8 x 7.9 x 5.9 in)
Weight (approx.)	1.5 kg (3.3 lbs)
Material	Plastic and metal
Cleaning Instructions	Wipe with a dry cloth; do not use harsh chemicals or water
Safety Precautions	Unplug when not in use; do not insert/remove watch while moving; stop use if damaged
Repairability	Contact Kogan.com support for issues; do not disassemble
Compatibility	Works with most automatic watches; consult watch manual for winding direction

Frequently Asked Questions - KAWATCHWINA Kogan

How do I select the rotation mode?

Use the Mode switch to cycle through the 5 available modes. Mode 1: OFF, Mode 2: clockwise (2min rotation, 6min rest), Mode 3: counter-clockwise (same cycle), Mode 4: alternating (2min each direction with 6min rest), Mode 5: alternating (5min each direction, continuous for 3 hours then 9 hours rest).

What is the purpose of the door sensor?

When enabled, the door sensor stops the motor automatically when the lid is opened, allowing you to safely insert or remove a watch. The motor resumes when the lid is closed.

Can I use any power adapter?

No, only use the AC adapter supplied with the product. Using a different adapter may cause damage or malfunction.

How long does the winder operate continuously?

It depends on the mode. Mode 5 runs for 3 hours continuously then rests for 9 hours. Other modes cycle with frequent rest periods. Always follow the mode instructions.

Is the winder suitable for all automatic watches?

Most automatic watches are compatible, but you should check your watch's manual for the required winding direction (clockwise, counter-clockwise, or alternating). The winder offers all these options.

What should I do if the winder stops working?

First, unplug the winder and check the power connection. If the issue persists, contact Kogan.com support for assistance. Do not attempt to repair it yourself.

How do I clean the watch winder?

Wipe the exterior with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners, as they may damage the finish.

Can I leave the winder plugged in all the time?

It is recommended to remove the AC adapter when the winder is not in use to save energy and prevent potential hazards.

Does the winder have a storage function?

Yes, the unit is designed as a storage box for one watch while winding. The cushioned interior protects your watch when not in use.

What is the warranty period?

Warranty information is not specified in the manual. Please contact Kogan.com support for warranty details.

USER MANUAL KAWATCHWINA Kogan

Dual Automatic Watch Winder and Storage Box

User Manual KAWATCHWINA

Thank you for buying this product, designed to keep your watches in top condition and always wound up, ensuring many years of use.

Please take a few moments to read through these instructions to ensure proper operation, and keep a copy for future reference.

Product Specifications

Power AC 100-240V,	50/60Hz
Features Winds clockwise or anti-clockwise
Temperature Operate	between -19C and 45C
Accessories AC Adapter

NOTE: Please use the AC adapter supplied with the product. Remove the adapter when the winder is not in use. Always turn off the power when inserting or removing watches.

Attention

Please handle this product with care and inspect it regularly to ensure it is in good working order.

If the product, power supply cord or plug shows any signs of damage: stop use, unplug and contact Kogan.com support.

OPERATION

Insert the adaptor into the socket located on the product and plug it into an electrical outlet.

1 - Rotation Mode

Mode 1: Operation ON/OFF

Mode 2: Turn clockwise. Rotate for 2 minutes and rest for 6 minutes then repeat.

Mode 3: Turn counter-clockwise. Rotate for 2 minutes, then rest for 6 minutes, then repeat.

Mode 4: Turn both clockwise and counter-clockwise. Rotate for 2 minutes in one direction, then rest for 6 minutes. Rotate for 2 minutes in the opposite direction and then rest for 6 minutes. Repeats above cycle.

Mode 5: Turn both clockwise and counter-clockwise. Rotate for 5 minutes in one direction and then rotates in the opposite direction for 5 minutes. Repeats continuously for 3 hours, then rests for 9 hours. After the 9^th hour, it will begin the above cycle again.

2 - Door Sensor

Some watch winders have this function. When the function is turned on, opening the cover will stop the motor working (so you can change the watch). When you close the cover again, the motor will continue to work.

NOTE: Most watches on the market require clockwise winding. Some brands may require counter-clockwise winding or even alternating rotation. Please consult with your watch manufacturer or watch manual for further information.

ATTENTION

- When inserting and removing a wrist watch, please ensure the electrical power is off as it may cause malfunction.

- Please remove the A/C adapter when the watch winder is not in use.

- Do not place or remove a watch on the watch holder while it is moving.

- Please dispose of this product responsibly at an approved disposal or recycling facility. Do not dispose of this product in normal household waste.

- To stop the winder rotating, turn of the power or lift the lid while the door sensor mode is on.