STM101 - Electric kettle SWAN - Free user manual and instructions

Product Type	Electric Teasmade (Kettle with Alarm Clock)
Brand	Swan
Model	STM101
Power Consumption	780-850 Watts
Input Voltage	230-240V AC
Frequency	50Hz
Main Functions	Tea making with alarm, alarm only, tea now, snooze, clock and alarm setting
Alarm Features	Alarm only or tea+alarm, snooze (4 min repeat), override settings
Tea Making Method	Water boiled in tank, ejected into ceramic jug with teabags/coffee
Safety Precautions	Do not overfill, do not immerse, use on stable surface, unplug when not in use, keep out of reach of children under 8
Cleaning Instructions	Unplug and cool, wash ceramic jug with warm soapy water, do not use abrasive cleaners, do not immerse unit
Descaling	Use descaling solution, boil in tank, press tea now to eject into jug, rinse
Spare Parts	Ceramic pot (STM100-01), replaceable picture frame
Warranty	2 years (UK and Eire only, proof of purchase required)
Certifications	EMC Directive 2004/108/EEC, LVD 2006/95/EC, RoHS 2011/65/EU, Food Contact
Plug Type	UK 13 Amp, earthed (must be earthed)
Included Accessories	Ceramic jug, picture frame, filler cap
Clock Setting	Two knobs under lid: one for clock, one for alarm

Frequently Asked Questions - STM101 SWAN

How do I set the clock on the Swan STM101?

Remove the lid from the Teasmade. Inside you will find two adjustment knobs. One is for setting the clock and the other for the alarm. Set the clock first by turning the appropriate knob, then set the alarm as desired. Replace the lid after setting.

How to make tea with the alarm function?

Fill the tank using the ceramic jug (do not overfill). Place teabags or coffee into the empty jug and position it on the dock, ensuring the safety switch is pressed. Set the ALARM+TEA button to the ON position. The tea making process will start at the selected alarm time before the alarm sounds.

How do I clean the ceramic jug and the unit?

Ensure the product is unplugged and completely cooled. Clean the ceramic jug daily with warm soapy water, then rinse with clean water. Do not use chemical or abrasive cleaners. For the exterior, use a soft cloth moistened with a mild detergent solution. Never immerse the unit in water.

How to descale the Teasmade?

Prepare a descaling solution according to the product instructions (commonly a mixture of water and descaling agent). Fill the tank with the solution, close the cap, and press the TEA NOW button to boil. Carefully replace the filler cap and press TEA NOW again to eject the solution into the jug. Allow to cool, then rinse the tank and jug with clean water.

What does the snooze button do?

The SNOOZE function allows the alarm to resound after approximately 4 minutes. It can be set even while the alarm is sounding, giving you extra time before the alarm repeated.

Can I use the Teasmade for alarm only without making tea?

Yes. Set the ALARM ONLY button to the SET position and ensure the ALARM+TEA button is OFF. The alarm will sound at the set time without the tea making function.

Is it safe to immerse the Swan STM101 in water?

No, never immerse the unit in water or any other liquid. Doing so can cause electric shock or damage. Only the ceramic jug can be washed by hand. The main unit must be cleaned with a damp cloth only.

What should I do if the power cord is damaged?

If the cord or plug is damaged, it must be replaced by the manufacturer or a qualified person to avoid an electrical hazard. Do not use the appliance until it is repaired. Check the cord regularly for damage.

How do I change the picture in the frame?

Grasp the tag inside the recess on the left side of the Teasmade and pull out the picture frame. Replace the photo with a suitably sized one, then insert the frame back into place.

What is the voltage requirement for the Swan STM101?

The appliance requires an input voltage of 230-240V AC at 50Hz. Ensure your mains supply matches this. If using in a country without the UK 13 Amp socket, consult a qualified electrician for the correct plug adaptor.

USER MANUAL STM101 SWAN

Swan designed for life

Retro | Teasmade

IMPORTANT INFORMATION - RETAIN FOR FUTURE USE

When using any electrical appliance, basic safety precautions should always be followed including the following:

• Always ensure that the voltage on the rating label corresponds to the mains voltage in your home
- Incorrect operation and improper use can damage the appliance and cause injury to the user.
- This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years. Check the power cord and plug regularly for any damage. If the cord or the plug is damaged, it must be replaced by the manufacturer or qualified person in order to avoid an electrical hazard.
- Check the power cord and plug regularly for any damage. If the cord or the plug is damaged, it must be replaced by the manufacturer or qualified person in order to avoid an electrical hazard.
- Do not use the appliance if it has been dropped or damaged in any way. In case of damage, take the unit in for examination and/or repair by an authorised service agent.
• Never immerse the unit in water or any other liquid for cleaning purposes.
- Remove the plug from the socket by gripping the plug. Do not pull on the cord to disconnect the appliance from the mains. Always unplug the unit when not in use, before cleaning or when adding or removing parts.
- The use of accessory attachments that are not recommended or supplied by the manufacturer may result in injuries, fire or electric shock.
- Do not let the cord hang over the edge of a table or counter. Ensure that the cord is not in a position where it can be pulled on inadvertently.
- Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or electric burner or in a heated oven.
- Do not use the appliance on a gas or electric cooking top or over or near an open flame.
- Use of an extension cord with this appliance is not recommended. However, if it is necessary to use an extension lead, ensure that the lead is suited to the power

IMPORTANT INFORMATION - RETAIN FOR FUTURE USE

not in use or before cleaning.

• Always operate the appliance on a smooth, even, stable surface. Do not place the unit on a hot surface.
• Ensure that the unit is switched off after use.
• The manufacturer does not accept responsibility for any damage or injury caused by improper or incorrect use, or for repairs carried out by unauthorised personnel.
• In case of technical problems, switch off the product and do not attempt to repair it yourself. Return the appliance to an authorised service facility for examination, adjustment or repair. Always insist on the use of original spare parts. Failure to comply with the above mentions precautions and instructions, could affect the safe operation of this product.
• Your appliance must never be switched on through an external timer or any kind of separate remote control system
  • DO NOT OVER-FILL THIS PRODUCT. DO NOT IMMERSE IN WATER

TECHNICAL DATA

Description: Retro Teasmade

Model: STM101

Input Voltage: 230-240V AC

Frequency: 50Hz

Power consumption: 780-850 Watts

SPARE PARTS REFERENCES:

STM100-01: Ceramic pot

INTRODUCTION

Thank you for purchasing this Swan TEASMADE. With this iconic product, you are joining a unique group of people – going back some 70 years or more – who just have to be valued with a ring, but one of ten in the session – and who are blame you.

HOW TO USE

Before first use, remove all packaging

It is important to ensure the correct plug adaptor is used when operating in a country not using the UK 13 Amp socket system. If in doubt, consult a qualified electrician.

• Do not remove the teapot from the base during the filling cycle as scolding water will be ejected.
  • After filling the tank, ensure the cap is properly secured. Do not open the cap during the boiling cycle
  • After the tea making cycle is complete, wait a few minutes before removing the filler cap as it will be hot.

• Fill the ceramic jug with water to 1" [25mm] below top.
- Open the lid and remove the tank cap by turning it anti-clockwise
- Pour the water from the jug into the tank and replace the tank cap by turning it clockwise.
- Place the ceramic jug back on it's stand on the TEASMADE, ensuring that it is resting firmly against the safety switch
• Press the TEA NOW button and wait
- In a few minutes the water in the tank will boil and be ejected into the pot. You will hear the traditional TEASMADE woosh! as the water is ejected from the tank into the ceramic pot.
• Once this process is complete, discard the water from the pot
- Your TEASMADE is now clean and ready to use.

SETTING THE CLOCK

Remove the lid from the Teasmade. There are 2 adjustment knobs. One is to set the clock, the other is to set the alarm. Set the clock first then set the alarm.

ALARM WITH TEA BUTTON

This button overrides the DN setting of the ALARM ONLY function.

This button has 3 settings:

• SET (for Tea+Alarm)

HOW TO USE

ALARM ONLY BUTTON

Set Alarm with Tea button to OFF position.

Use this button when the tea making function is not required. This button has 3 settings:

• SET (for Alarm only)
  • OFF [no function]
• SNCOZE (alarm will resound after about 4 minutes)
• Snooze can still be set while alarm is sounding.

TEA WITH ALARM

Use the jug to fill the tank (do not over-fill). Put Teabags (or required amount of coffee into the empty jug a place in the jug dock ensuring that the safety switch is pressed.

Put the ALARM+TEA button into the ON position. The tea making process will start at selected alarm time before the alarm sounds. This setting will override the ON setting of Alarm Only function.

CHANGING THE PICTURE

To remove the picture frame grasp the tag inside the recess on the left of the Teasmade. The photo frame can be pulled out. Change the photo to a suitably sized one of your own and replace the photo from accordingly.

CLEANING & MAINTENANCE

Ensure the product is unplugged from the mains and completely cooled before cleaning. The pot should be cleaned daily with warm soapy water, then rinsed with clean water. Do not leave water in the tank for long periods. Wait until the product has cooled before emptying the tank. The outside of the unit can be cleaned with a soft cloth moistened with a mild detergent solution.

DO NOT USE CHEMICAL OR ABRASIVE CLEANERS. DO NOT IMMERSE THE UNIT IN WATER.

DESCALING

HOW TO USE

an increased amount of steam so be careful. Once the water in the tank is boiling, press the TEA NOW button to switch it off.

Carefully replace the filler cap and press the TEA NOW button once again. The water will be ejected into the pot. This will de-scale all the pipes and tubes inside the TEASMADE. Once de-scaling is complete, allow the unit to cool and rinse the tank and pot in clean water.

DOCUMENTATION

We Swan Products Ltd declare that this product conforms to the following product legislation in accordance with the following directive(s):

2004/108/EEC The EMC Directive (the Electromagnetic Compatibility Directive). 2006/95EC. The LVD Directive (Low Voltage Directive).

2011 65 EU. The RoHS directive (Restriction of Hazardous Substances Directive) 80/590/EEC and 89/109/EEC Food Contact

WARRANTY

This product is guaranteed for 2 years from the date of original purchase. If any defect arises due to faulty materials of workmanship the faulty products must be returned to the place of purchase. Refunds or replacement is at the discretion of the store.

The following conditions apply:

• The product must be returned to the retailer with proof of purchase.
- The product must be installed and used in accordance with the instructions contained in this instruction guide.
• It must be used only for domestic purposes.
• It does not cover wear and tear, damage, misuse or consumable parts.
• Swan Products Ltd has limited liability for incidental or consequential loss or damage.
• This guarantee is valid in the UK and Eire Only.

DISPOSAL OF UNIT

BS PLUG

The wires in the mains lead are coloured in accordance with the following code:

BLUE

NEUTRAL

BROWN LIVE

GREEN/YELLOW EARTH

As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings identifying the terminals on your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. The wire which is coloured GREEN/YELLOW must be connected to the terminal which is marked with the letter E or [earth symbol] and is coloured GREEN or GREEN/YELLOW.

WARNING THIS APPLIANCE MUST BE EARTHED

SWAN BRAND HERITAGE

Cameron St. Birmingham

Did you know...