TDE3274BUP - Television GPX - Free user manual and instructions

Product Type	Television
Brand	GPX
Model	TDE3274BUP
Screen Size	32 inches
Display Technology	LED
Resolution	1366 x 768 (HD)
Aspect Ratio	16:9
Refresh Rate	60 Hz
Power Consumption	50W (typical)
Input Voltage	AC 100-240V, 50/60Hz
Dimensions (with stand)	732 x 480 x 180 mm
Weight	4.5 kg
Connectivity	HDMI, USB, VGA, Composite, RF
Audio Output	2 x 8W speakers
Remote Control	Included
VESA Mount	100 x 100 mm
Features	USB Media Playback, Sleep Timer, Channel Scan
Cleaning	Wipe with dry soft cloth; avoid liquids
Safety	Do not expose to water or extreme temperatures
Spare Parts & Repairability	Contact GPX support for replacement parts

Frequently Asked Questions - TDE3274BUP GPX

How do I set up my GPX TDE3274BUP TV for the first time?

Connect the power cord and antenna/cable. Press the Power button on the remote. Follow the on-screen setup wizard to select language, scan for channels, and set preferences.

What should I do if the remote control is not working?

First, check if the batteries are inserted correctly or replace them. Ensure no obstruction between remote and TV. Try pressing the power button on the TV itself to verify the TV is functional.

How can I connect external devices like a game console or DVD player?

Use the HDMI ports for high-definition devices. For older devices, use composite (yellow/red/white) or VGA inputs. Select the corresponding input source using the 'Source' button on the remote.

Why is there 'No Signal' on the screen?

Ensure the correct input source is selected. Check that the external device is powered on and cables are securely connected. If using an antenna, try re-scanning channels via the menu.

How do I clean the TV screen safely?

Turn off the TV and unplug it. Use a dry, soft microfiber cloth to gently wipe the screen. Do not use any liquids, cleaning agents, or paper towels as they may damage the display.

Can I mount this TV on a wall?

Yes, the TDE3274BUP supports VESA 100x100 mm wall mounts. Use appropriate hardware and follow the mount instructions. Ensure the wall can support the TV's weight (approx. 4.5 kg).

How do I perform a channel scan?

Press the Menu button, navigate to Channel or Settings, select Auto Scan or Auto Tuning. Choose Air for over-the-air or Cable for cable TV, then start the scan.

What should I do if the TV turns off by itself?

Check if the Sleep Timer is set (Menu > Timer). Ensure the TV is not overheating—provide ventilation. If problem persists, try a factory reset or contact support.

How can I play media from a USB drive?

Insert a USB drive into the USB port. Press the Source button and select USB. Use the remote to browse and play media files. Supported formats include MP4, AVI, MP3, JPEG.

Where can I find the user manual or spare parts?

The user manual is available for free download on the notice-facile.com website. For spare parts, contact GPX customer support with your model number TDE3274BUP.

USER MANUAL TDE3274BUP GPX

Black-and-white photo of a flat-screen TV displaying a butterfly in the sky above a field of poppy flowers, with a CD inside (no text or symbols visible)

32" LED HDTV + DVD

User's Guide for Model TDE3274-v1508-01

For the most up-to-date version of this User's Guide, go to www.gpx.com

Safety Instructions & Warnings

WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.

This product utilizes a Class I laser to read Compact Disc. This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated. Invisible laser radiation is present when the CD Player's lid is open and the system's interlock has failed or been defeated. It is very important that you avoid direct exposure in the laser beam at all times. Please do not attempt to defeat or bypass the safety switches.

Important Safety Instructions

- Read these instructions.

- Keep these Instructions.

- Need to warnings.

- Follow all instructions.

- Dif. can use this approach to treat cancer. (see references in article)

- Do not block any ventilation openings. Install in accordance

with the manufacturer's instructions.

- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) to produce heat.

- Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Unplug this apparatus during lightning storms or when unused for long periods of time.

- Refer all servicing to qualified service personnel, servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

- Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used use caution when moving the cart/apparatus combination to avoid injury from tip-over.

FCCWarnings

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, users, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, any cause harmful interference to reduce communications. However, there is no guarantee that interference can be not or in a particular installation. This equipment has been confirmed by the use of the equipment to radio or television reception, which can be determined by using the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that, in which the receiver is connected.

- Consult the dealer or an experimaxial radio TV technician for help.

Safety Instructions & Warnings

Additional Warnings and Precautions

- CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. AVIS: AFIN DE PRÉVENIR LES CHOCS ÉLÉCTRIQUES, FAITES CORRESPONDRE LA PICHE BLANCHE DE LA PRISE À LA FENTE LARGE, INSÉREZ TOTALEMENT

- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.

- CAUTION: Use of controls or adjustments or performance of procedures either than those specified may result in hazardous radiation exposure.

- WARNING: Do not place this unit directly into furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.

- WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.

- Caution and marking information is located at the rear or bottom of the apparatus.

- Objects filled with liquids, such as vases, shall not be placed on the apparatus.

- Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.

- Do not mix old and new batteries.

- WARNING: This product may certain chemicals known to the State of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after handling.

• This product meets and complies with all Federal regulations.

Table of Contents Setup

Setup 5

includes

Connecting the Stand

Power

Remote Batteries

Orientation 6

TV Controls & Inputs

Remote Functions

Connecting Devices to Your TV 8

Connecting Cable TV or a TV Antenna

Connecting HDMI

Connecting Composite Audio/Video

Connecting Component (YPbPr) Video/Audio

Connecting a Computer

Connecting Optical Audio

Connecting the Stereo Audio Output

DVD & CD 14

Playing a DVD or CD

Programming a DVD or CD

DVD Setup Menu

USB & SD, MMC, MS Memory Card.... 15

Using a USB Thumb Drive

Using a Memory Card

Settings 16

Auto Scanning for Channels

Parental Controls (V-Chip)

Setting Favorites

Viewing Favorites

Setting the Clock

Mounting to a Wall 17

VESA Specifications

Notes....18

Company Information 20

Contact Information

Warranty

International Support

Includes

• Remote control and 2 AAA batteries

• Removable stand

Connecting the Stand

Technical line drawing of two electronic components with internal circuitry and mounting brackets (no text or symbols)

When placing TV on flat surface, be careful not to push, scratch, or otherwise damage the front of the TV and LCD screen. Using a phillips-head screwdriver, tighten the screws by hand. Using a power drill could damage the TV stand.

Note: Some pixels may be visible on the screen, appearing as tiny red, green, blue or black spots. This is normal and is not a defect on the TV, and does not negatively affect the performance or picture quality.

Power Remote Batteries

Diagram showing two views of a device layout with labeled components and battery arrangement (no text or symbols)

Plug the AC power cord into a standard wall outlet.

Requires 2 AAA-size batteries (Included).

Orientation

Remote FunctionsTV Controls & Inputs

Power

Press to power the television on or on.

Press to view the on-screen display.

Power

on or on.

display

Display

display

■

Aspect

Press to adjust the aspect ratio

nemert/LUM, VIEF,

1. ann 0.0125

Number-KAAPSI

Number Keypak

of the 100%

Audio/CC

Press to relax the current spirit

settings for the loaded DVD

In Di mode press to turn closed

scotiating eff. man

(1) 设 f(x) = 0 ,

Favorites

1 channels

1.2.3.4.5.6

DVD Setup

y. Intechnik

memory and

Audio settings for the DVD.

表决结果：同意

DVD Menu

CVD's menu.

1. 2017年1月1日

Setup

ctuo menu

www.festia

Oms, Entor

in

mill mets.

Gulda

Guide

to view the sign guide

(1) 2017年1月1日

Volume

Volume 1 in a volume

2.4.1.3.5

Picture

as between

d D'ANATE

tumized by

in the menu.

(1) 本次股东大会会议

PlayPause

Press to play or pause on

individual chapter or track

6.

Stop

a complex in

during play.

√E presented

KIFORWARD

ap menen

s of cracks.

2017.14.15

SOPASK FMU

or Rajn's center track

plot of block

Elect

techni-vis

Mute

Press to make the volume.

。

Freeze

Press to freeze or untreated the

current frame in 15 minutes

Glow

Sleep Once in set the slant times (after the

to the sleep of the time has expired the television

will automatically serve off.

(217) 630

Regener

Reput Res in want the current

selection or track

(五)

Pty.

in TV' mode press to switch

to the previous channel.

10.2.2

Proc

Press to program a loaded

disc to play titles, chapters, or

tracks in a specified order

[Non-Text]

Subtitl

Crops in activitate substitutes

on a loaded DVD

[Non-Text]

Source

Use the Arrow/Enter buttons

to select the source.

表决结果：无

ExH

Press to exit the current on screen menu.

(1)

Sound

Press to adjust the sound between

STANDARD MUSIC, USER, MOVE.

and SPORTS. The usermode

can be customized by accessing

Sound Settings to the men

Ours

Climmer's Sore to deliver the wind-like channel

HCA

Arvatic

Zona in a new elimination curve

on supported DVDs

2.1.19

Zoom

Press to zoom in or put on a loaded (MST)

(1)

Wide

Press to switch between 4:3

LB, 43 PS, and 165

(二)本说明仅供参考。

A·B

Press to create a repeating loop on a

specified section of a loaded DVD.

Connecting Devices to Your TV

Connecting Cable TV or a TV Antenna

Requires a cable TV hookup or TV antenna cable (not included).

1. Connect the Cable/Antenna wire to the input on the television.
2. Press the Source button to switch to TV mode.
3. Press the Setup button to access the setup menu.
4. Press the Arrow (◀ ▶) buttons to highlight the Channel icon, and press the Enter button.
5. Press the Arrow (▲▼) buttons to highlight Air/Cable. Press the Arrow (▲▼) buttons to select AIR or Cable.
6. Press the Arrow | ▲▼ | buttons to highlight Auto Scan. Press the Enter button to begin scanning for available channels.

Connecting HDMI

HDMI offers superior sound and picture quality when compared to Composite or other connection types, and is the easiest way to connect your media devices to the television.

Requires a device that supports HDMI and a HDMI cable (not included).

1. Connect the device's HDMI output to the HDMI input on the television.
2. Press the Source button to switch to the connected input HDMI.

Connecting Composite Audio/Video

Requires composite video (yellow) and RCA stereo (red, white) cables (not included).

1. Connect the video output on your media device to the corresponding color coded video inputs on the television with a Composite Video cable.
2. Connect the audio output on your media device to the corresponding color coded audio input on the television with stereo RCA cables.
3. Press the Source button to switch to the connected input AV Composite.

Connecting Cable TV or a TV Antenna - Rear View

Diagram of a computer tower rear panel with screw slots and an inserted cable (no text or symbols)

Connecting HDMI - Rear View

Connecting Composite Audio/Video- Rear View

Connecting Devices to Your TV

Connecting Component (YPbPr) Video/Audio

Requires component video (green, blue, red) and RCA stereo (red, white) cables (not included).

1. Connect the audio output on your media device to the corresponding color coded audio input on the television with stereo RCA cables.
2. Connect the video output on your media device to the corresponding color coded video inputs on the television with a Component Video cable.
3. Power the television on and press the Source button to switch to the connected input YPbPr.

Connecting a Computer

Requires a PC with a VGA output, and a VGA cable (not included).

1. Connect the computer's VGA output to the VGA/PC Input on the television.
2. Press the Source button to switch to the PC Mode.
3. Audio from the connected PC can be input to the television through the TV's PC Audio input by using a 3.5mm audio cable (not included).

Connecting Optical Audio

Requires a receiver with a Digital Optical Input and a Digital Optical Audio Cable (not included).

1. Connect the Digital Optical Audio Cable from the Optical Output on the television to the Input on the receiver.
2. Set the receiver to accept the Optical Input source from the television.

Please Note:

Home theater systems may label the Digital Optical Out source differently, such as "PCM", or "Digital Audio Input". Please consult your home theater system's user manual in order to select the correct input source.

If there is no sound, be sure the Digital Audio Output is set to PCM (under the screen in TV Setup).

Connecting Component (YPbPr) Cables - Rear View

Connecting a Computer-Rear View

Diagram of a computer rear panel showing internal components and cable connections (no text or symbols)

Connecting Optical Audio - Rear View

Connecting Devices to Your TV

Connecting the Stereo Audio Output

Requires an RCA audio cable (not included).

1. Connect an RCA cable to the Audio Output on the unit and an audio input on an external stereo system.
2. Adjust the external stereo system's source to the correct audio input used in step one.
3. Audio played through the unit will now be heard through the connected stereo system.

Connecting the Stereo Audio Output - Rear View

Technical line drawing of a computer rear panel with connectors and a USB cable (no text or symbols)

IMPORTANT:

The Stereo Audio Output sends a fixed audio volume level to any connected audio device. To adjust the volume, you must change it from the connected device.

ADJUSTING THE VOLUME OF THE TV WILL HAVE NO EFFECT.

DVD & CD

Playing a DVD or CD

Note: This unit is not compatible with MP3 CDs.

1. Insert a DVD or CD into the slot load disc drive, with the label side facing the rear of the television. Once a DVD or CD is loaded into the television, the TV will automatically switch to DVD mode
2. Press the Play/Pause button on the remote or TV to begin playing the loaded disc.

Programming a DVD or CD

1. While a DVD or CD is playing, press the Program button on the remote.
2. Using the Number Keypad enter in the chapters or tracks in the order you want them to play.
3. Highlight the on-screen Start button using the Arrow buttons and press the Enter button.
4. The programmed chapters and tracks will now play in the designated order.
5. To cancel a program, press the Stop button twice.

DVD Setup Menu

In DVD mode, press the DVD Setup button to access the DVD setup menu. Press the DVD Setup button to exit the DVD setup menu.

USB & SD, MMC, MS Memory Card

Using a USB Thumb Drive

1. Load a USB thumb drive into the USB Port on the side of the television.
2. Press the Source button to switch to USB made.
3. Use the Arrow and Enter buttons to select and play content from the connected USB thumb drive.

Using a Memory Card

1. Load an SD, MMC, or MS memory card on the side of the television.
2. Press the Source button on the remote to switch to SD mode.
3. Use the Arrow and Enter buttons to select and play content from the connected SD, MMC, or MS memory card.

Settings

Auto Scanning for Channels

The Auto Channel Scan must be run before any channels can be viewed on the television. Initial channel scanning process may take up to 15 min.

1. Press the Source button to switch to TV mode.
2. Press the Setup button to access the Setup menu.
3. Press the Arrow | ▶ ▶1 buttons to highlight the Channel icon, and press the Enter button.
4. Press the Arrow (▲▼) buttons to highlight AIR/Cable, and press (◄►) to select AIR.
5. Press the Arrow (▲▼) buttons to highlight Auto Scan, and press the Enter button to begin scanning for available channels.

Parental Controls (V-Chip)

1. Press the Source button to switch to TV mode.
2. Press the Setup button.
3. Press the Arrow (◀ ▶) buttons to highlight Lock, and press the Enter button.
4. Enter the default passcode to access the Lock preferences. The default passcode is 0 0 0 0.
5. From this menu, you can lock out specific ratings from the United States rating system or the Canadian rating system by accessing the V-CHIP settings. You can also lock the buttons on the television or lock specific sources from access.

Setting Favorites

1. Press the Source button to switch to TV mode.

2. Press the Setup button to access the setup menu.

3. Press the Arrow (▲) buttons to highlight the Channel Icon. Press the Enter button.
4. Press the Arrow (▲▼) buttons to highlight the Favorites Icon. Press the Enter button.
5. Use the Arrow | ▲▼ | buttons to select the desired channels and then press the Enter button.

Viewing Favorites

1. Press the Source button to switch to TV mode.
2. Press the Favorites button to view a list of your saved favorites.

Setting the Clock

1. Press the Setup button to access the setup menu.
2. Press the Arrow (◀ ▶) buttons to highlight the Time icon, and press the Enter button.
3. Press the Arrow (▲▼) buttons to highlight Time Zone, and press the Arrow (◀▼) buttons to select your current time zone.
4. Press the Arrow! ▲ ▼ | buttons to highlight Auto Clock, and press the Arrow! ▲ ▶ | buttons to turn auto clock on or off. When the correct time zone is set, auto clock will automatically set your clock and date for you.
5. To set the time and date manually, turn Auto Cock off, highlight Clock, and use the Arrow and Enter buttons to manually set the time and date.

Mounting to a Wall

VESA Specifications

- 200mm x 100mm spacing (wth. x ht.)

- M6 ball pattern and thread pitch

A 15 to 25mm long bolt is recommended, depending on the thickness of the wall bracket selected.

WE STRONGLY RECOMMEND HAVING THIS TELEVISION MOUNTED PROFESSIONALLY.

Notes

Contact Information

Website: www.gpx.com

Email Support: [e-mail]

Email Parts: [e-mail]

Phone Support: 1-888-999-4215

Warranty

For Warranty Information and the most up-to-date version of this User's Guide, go to: www.gpx.com

International Support

To download this User's Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.gpx.com

Protect for Today Sustain for Tomorrow

Copyright © 2014 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.