CC-130 - Clamp Impact - Free user manual and instructions

Product Type	Home Appliance
Model	CC-130
Brand	Impact
Category	Uncategorized
Dimensions (H x W x D)	30 cm x 20 cm x 20 cm
Weight	2.5 kg
Power Supply	220-240V, 50-60Hz
Power Consumption	500 W
Main Function	Mixing, blending, grinding
Speed Settings	2 speeds + pulse
Capacity	1.5 liters
Material	Stainless steel blade, plastic body
Safety Features	Overheat protection, non-slip feet
Cleaning	Removable parts dishwasher safe
Maintenance	Regular blade lubrication
Accessories Included	Measuring cup, spatula
Warranty	2 years
Country of Origin	China

Frequently Asked Questions - CC-130 Impact

How do I assemble the CC-130?

Align the jar with the base and twist clockwise until it clicks. Ensure the lid is securely in place before use.

Can I blend hot liquids?

No, allow liquids to cool below 60°C to avoid pressure buildup and potential lid ejection.

How do I clean the blender?

Remove the jar and lid, rinse with warm soapy water, or place on top rack of dishwasher. Wipe the base with a damp cloth.

The motor won't start. What should I check?

Ensure the jar is properly locked onto the base and the lid is closed. Check the power cord connection and reset the overheat protection if tripped.

What is the maximum capacity?

Do not fill beyond the max line (1.5 liters) for liquids, and avoid overfilling with solids.

Can I crush ice?

Yes, use the pulse function in short bursts. Do not add large ice cubes directly; break them into smaller pieces.

The rubber seal is leaking. How to fix?

Check the seal for damage. If worn, replace it. Ensure it is properly seated before use.

What does the pulse function do?

It runs the motor at full speed while the button is pressed, ideal for chopping or mixing thick ingredients.

Is the blender BPA-free?

Yes, all plastic parts are made from BPA-free materials.

How to store the appliance?

Store in a dry, clean place. Avoid direct sunlight. Keep the cord wrapped and the jar upside down on the base.

USER MANUAL CC-130 Impact

Black and silver mechanical clamp device with coiled wire against a yellow background (no text or symbols visible)

CC-130 Pipe Clamp

with Baby Pin

INSTRUCTIONS

Introduction

Thank you for choosing the Impact CC-130 Pipe Clamp with Baby Pin. This clamp features a baby (5/8 in.) pin that will accommodate an item with a baby receiver, a long handle for extra torque when tightening the clamp, and an included safety cable. The CC-130 is ideal for suspending a lighting fixture from an overhead pipe.

Note: When using the safety cable, thread the cable through your lighting fixture and around the pipe from which you are suspending it.

Recommended Equipment and Accessories

• ME-111 Plate Clamp
  • ME-128 Right Angle Adapter
  • ME-114 3 in. Center Jaw Vise Grip
  • ME-108 Monitor Mount Adapter
  • LSP-K10 - Pro Light Stand, 10.8 ft., Black

Visit our website at www.ImpactStudioLighting.com for more Impact equipment and accessories.

Specifications

Clamping range: 16 to 50 mm

Pin size: 5/8 in.

Maximum load capacity: 110 lb. (50 kg)

Warnings ⚠

• Please read and follow these instructions, and keep this manual in a safe place.
• Handle the unit with care.
• Clean the unit with a soft, dry cloth.
• Keep this unit away from children.
• Make sure everything is secure before proceeding.
• Make sure the item is intact and that there are no missing parts.
• Always use the included steel safety cable when suspending a light fixture or other assembly.
• Do not exceed the maximum load capacity.
• Use caution when mounting anything at the maximum load capacity.
• All photos are for illustrative purposes only.

One-Year Limited Warranty

This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider's responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider's discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARR ANT Y PROVIDER MAKES NEIT HER ANY E XPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY Y OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization ("RMA") number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser's own risk and expense.

For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353.

IMPACT®

A Gradus Group Brand

Product warranty provided by the Gradus Group.

www.gradusgroup.com

IMPACT is a registered trademark of the Gradus Group.

© 2018 Gradus Group LLC. All Rights Reserved.