PartySpeaker S1 - Loudspeaker SALORA - Free user manual and instructions

Product Type	Portable Bluetooth Speaker with Karaoke
Brand	Salora
Model	PartySpeaker S1
Power Source	Built-in rechargeable battery, DC 5V via USB
Battery Life	Up to 2 hours continuous playback
Audio Inputs	Bluetooth, USB, TF card (MP3 up to 32GB), AUX 3.5mm, microphone input
Radio	FM digital radio with auto search and 30 preset channels
Microphone	Built-in microphone input with adjustable echo/reverb, volume control, and recording function
Bluetooth Version	Bluetooth with pairing name "Salora PartySpeaker S1" (password: 0000 if required)
Playback Modes	All, Random, Repeat One, Repeat Folder
Equalizer Presets	NOR, POP, ROC, JAZ, CLA, CVB
Lighting	Built-in light mode (short press REC button)
Display	LED screen showing time and mode
Additional Features	TWS pairing for stereo, remote control included, belt/handle design for portability
Charging Indicator	Red light while charging, blue light when fully charged
Low Battery Indicator	Built-in low battery and full charge indication
Cleaning	Wipe with a dry, soft cloth. Do not use harsh chemicals.

Frequently Asked Questions - PartySpeaker S1 SALORA

How do I pair the PartySpeaker S1 with my phone via Bluetooth?

Turn on the speaker and press the MODE button until the display shows 'BLUE'. Enable Bluetooth on your phone and search for 'Salora PartySpeaker S1'. Tap to connect. If a password is required, enter 0000. A voice prompt will confirm successful pairing.

How can I play music from a USB drive or TF card?

Insert a USB drive or TF card (up to 32GB, FAT32 format with MP3 files) into the corresponding port. The speaker will automatically start playing. Use the ◀/▶ buttons to navigate tracks. You can also use the remote control to select specific tracks by entering the track number.

How do I use the FM radio function?

Press the MODE button to switch to FM mode. Then long press the ▶/SCAN button to perform a full automatic search. All found stations will be saved. Use ◀/▶ to cycle through them. Short press ▶/SCAN to mute/unmute.

How do I record audio with the external microphone?

Connect a storage device (USB or TF card). Short press the REC button to start recording; the LED screen will show the recording time. Adjust the ECHO knob to minimum. Place the microphone at a proper distance to avoid feedback. Long press REC again to stop and save. To delete a recording, long press REC while in recording folder.

How do I connect a microphone and adjust its volume?

Plug the microphone into the MIC IN jack. Use the MIC VOL+ and MIC VOL- buttons on the speaker or remote to adjust the microphone volume. The ECHO/EQ button controls the microphone reverberation effect (short press to cycle through reverb levels).

Can I connect two PartySpeaker S1 speakers for stereo sound?

Yes, you can use TWS (True Wireless Stereo) mode. Turn on both speakers and switch them to Bluetooth mode. Pair one speaker with your phone. Then long press the ▶/SCAN button on the second speaker to connect them. A voice prompt will indicate successful pairing.

How do I change the equalizer (EQ) settings?

Long press the ECHO/EQ button on the speaker or short press EQ on the remote control to cycle through the presets: NOR (Normal), POP, ROC (Rock), JAZ (Jazz), CLA (Classic), CVB (Custom).

How long does the battery last and how do I charge it?

The built-in battery provides up to 2 hours of continuous playback. Charge via the DC 5V port using the included USB cable. The red indicator lights up during charging; it turns blue when fully charged. It is recommended to charge when audio distortion occurs.

How do I use the remote control?

Point the remote at the receiver on the speaker. Use POWER to enter standby, MODE to change input, number keys (0-9) to select tracks in MP3 mode, 10+ to jump 10 tracks, VOL +/- for volume, ◀/▶ for previous/next track, and EQ for equalizer presets.

What should I do if the speaker does not turn on?

Ensure the POWER switch is turned ON. If not, charge the battery via DC 5V for a few minutes and try again. If the issue persists, check the charging indicator: if no light appears, the charger or cable may be faulty.

USER MANUAL PartySpeaker S1 SALORA

1. Ultra-large magnetic circuit high-sensitivity speaker with high penetrating power, low-frequency shock and perfect medium-/high-frequency representation.
2. The latest decoding chips supporting stably playback of MP3 in up to 32GB USB/TF card.
3. FM radio reception - high-quality digital radio with automatic channel search and storage of up to 30 channels.
4. 1. 5mm AUX audio input for each connection to a wide range of sound sources.
5. Built-in high-capacity battery for consecutive playback of up to 2 hours.
6. Connect the microphone, adjustable reverberation, voice and Karaoke function to present outstanding performance.
7. Battery with built-in recharging protection to present a long and stable service life.
8. Built-in low battery and full recharging indication. Human-oriented use.
9. With belt/handle design for best choice of mobile speaker.
10. Microphone input recording to act as your personal business assistant.
11. With Bluetooth function.

II. Recording

Recording via External Microphone:

Connect a storage device (USB/TF card) and short press RECORD key to start recording for a time depending on the storage capacity. During recording, tune the “-ECHO+” knob to the minimum. It is noticeable that the microphone should be located a proper distance away from the speaker to prevent any howl-round or noise.

Notes: This product starts recording from the time as displayed on the LED screen.

III. The bluetooth pairing operation and related parameters:

1. Power: switch the power to ON, press the key “MODE” to enter the mode of Bluetooth, the display screen will show “BLUE”.
2. Switch on the Bluetooth function of Mobile phone and searching, while the Mobile phone shows "Salora PartySpeaker S1", click the connect directly. mobile phone connection do not need password, if need password, please input "0000" to go on pairing. After success pairing, the speaker will send out a voice of prompt. it is success pairing between mobile phone and Bluetooth speaker.
3. Play the music of your mobile bphone directly and will give out beautiful voice from speaker.

IV. Functional Operations and Features

1. LED Screen.
2. TF Port: Read audio files in MP3 format in TF card in capacity up to 32G (FAT32).
3. USB Port: Read audio files in MP3 format in USB storage device in capacity up to 32G (FAT32).
4. AUX IN: External sound source input port (plug-and-play).
5. ◀/VOL-: In the play status of USB/TF Card/Bluetooth, short press it to select the previous channel. In FM receiving status, short press it to select the previous channel after a full station search has been executed. long press will decrease the volume.
6. ▶/SCAN: In USB/TF card/Bluetooth reading status, short press it to play/pause, In USB/TF card reading status, long press it to select one of four playback sequencing modes (All - play all tracks in sequence; RAND - play in random; ONE - repeat one track; FOL - repeat all tracks in a folder). In FM receiving status, long press it to execute a full search (it is recommended to execute at least one full search before using radio receiving function. All founded stations will be saved even in power-off). In AUX input / FM radio status, short press it to toggle between mute and

normal volume.

1. ▶▶I/VOL+: In USB/TF card/Bluetooth reading status, short press it to go to the next song. In FM receiving status, short press it to select the next channel after a full station search has been executed. long press will increment the volume.
2. MODE/SHIFT/TWS: Short press it to toggle between USB/TF/AUX IN/Bluetooth and FM receiving modes. long press it to toggle between recording folder and MP3 folder. TWS interconnection mode: open the two machines that need interconnection at the same time, and switch to bluetooth mode at the same time. Pair one of them with the mobile phone's bluetooth to play music. Long press the play/pause button on the connected machine to exit the connected mode. Long press the connected machine to the phone to exit the connected mode directly.
3. ECHO/EQ: short press it is Microphone reverberation control button. long press it is In USB/TF/AUX/Bluetooth reading status it to select an environment mode (from NOR POP, ROC, JAZ, CLA, CVB).
4. Microphone volume down control button.
5. Microphone volume increment control button.
6. 🎨/REC : Short press it is light mode button; Long press this button to record, long press again to delete the recording.
7. Power: Power switch.
8. DC 5V recharging: DC 5V recharging port.
9. Recharging indicator light: When recharger is connected, the red light turns on. When the device is fully recharged, the blue light turns on.
10. Microphone input: Microphone input jack.
11. Remote Control Receiver.

V. Operation Instructions on Remote Control

1. Power Button: Short press it to enter standby mode; short press it again to resume. If no device is connected, the system goes to "BT".
2. PLAY / PAUSE / SCAN: Short press it to PLAY / PAUSE. In FM receiving status, long press it to execute a full search.
3. Mode Button: Short press it to toggle between USB/TF/AUX/Bluetooth and FM receiving modes.
4. Number keys 0\~9: In the MP3 mode (USB /TF card/Bluetooth), if want to listen to 123 songs, you can directly use the number keys on the remote control three-digit number followed by enter 1,2,3, wait 2 seconds minutes later, the player will automatically jump to the specified 123 songs to start playing. Any input of number larger than number of the total available tracks is invalid.
5. 10 + key: To track down the jump 10, as is now playing the first 23, if you press the "10 +", skip to 33 tracks to start playing, the playback device if the total of 10 songs is not enough songs When you return to the first one track.
6. VOL + / VOL- key: MP3 (USB / TF), AUX, etc mode, short press, long press VOL + or VOL- key, you can increase or decrease the speaker output of the electronic volume.
7. Previous Track: Select the pervious channel.
8. Next Track: Select next channel.
9. EQ: In USB/TF/AUX/Bluetooth reading status short press it to select an environment mode (from NOR, POP, ROC, JAZ, CLA, CVB).

CAUTION:

Please Be sure to charge while music distorted.