HANNStime.square - Television HANNSPREE - Free user manual and instructions

Product Type	LCD Television
Brand	Hannspree
Model	HANNStime.square
Display Size	9.6 / 12.1 inches (diagonal)
Aspect Ratio	4:3
Resolution	800 x 600 pixels
TV System	NTSC
Video Inputs	Composite Video (via 4-IN-1 A/V cable), S-Video
Audio Input	RCA L/R Audio (via 4-IN-1 A/V cable)
Audio Output	3.5mm headphone/speaker jack
Built-in Speakers	2W + 2W or 3W + 3W
Power Supply	100-240V AC, 50/60 Hz, 12V DC via included adapter
Power Consumption	60W maximum
Remote Control	Included with battery (AAA or CR2032)
On-Screen Display (OSD)	Yes, with adjustable brightness, contrast, color, audio, and TV settings
Tuner	Built-in TV tuner (VHF/UHF/CATV)
Accessories Included	Power cord, power adapter, 4-IN-1 A/V cable, remote control, batteries, user manual
Weight	Approximately 2.5 kg (5.5 lbs) for 12.1-inch model
Dimensions (WxHxD)	Approximately 320 x 250 x 150 mm (12.6 x 9.8 x 5.9 in) for 12.1-inch model
Safety Certifications	FCC Class B, ICES-003, CE
Warranty	Refer to enclosed warranty manual

Frequently Asked Questions - HANNStime.square HANNSPREE

How do I turn on the TV for the first time?

Connect the power adapter to the DC-IN jack and plug into an outlet. Press the Power button on the remote or control panel.

How can I connect external devices like a DVD player?

Use the supplied 4-IN-1 A/V cable. Connect the yellow (video) and red/white (audio) plugs to your device's corresponding outputs, then plug the other end into the TV's 4-IN-1 jack.

Why is there no picture but sound is working?

Check the antenna/cable connection. Adjust brightness in the OSD menu (press MENU, then navigate to Brightness). Ensure the correct input source is selected.

How do I scan for channels?

Press MENU, go to TV Setting > Auto Program. Select Yes to automatically search and store available channels.

Can I use headphones with this TV?

Yes, plug headphones into the Headphone/Speaker jack on the back. The built-in speakers will mute automatically.

How do I reset the TV to factory settings?

Press MENU, go to Miscellaneous Setting > Reset. Select Yes to restore all defaults. Warning: This erases all custom settings.

What type of remote control battery does it use?

The remote may use either two AAA batteries or one CR2032 lithium battery. Check the compartment and insert with correct polarity.

Why is the remote control not working?

Ensure batteries are inserted correctly and fresh. Remove obstacles between remote and TV sensor. Try operating within 5 meters (16 feet) and within 30 degrees angle.

How do I clean the TV screen?

Turn off the TV. Use a clean, soft lens cloth to gently wipe the screen. For the shell, use a dry cloth; avoid alcohol or solvents.

What is the OSD menu and how do I access it?

The On-Screen Display (OSD) lets you adjust picture, audio, and TV settings. Press the MENU button on the remote or control panel to open it.

USER MANUAL HANNStime.square HANNSPREE

1. Regulatory Information.... 3

2. Description of Warning Symbols .... 5

3. Safety Notices .... 6

4. Preface 13

5. Introducing the TV 15

Features.... 15

1. Checking Package Contents.... 16

2. Getting Started 17

Control Panel 17

Input and Output Jacks 18

Remote Control 19

Inserting the Remote Control Battery/Batteries...... 21

1. Making Connections ...... 24

Connecting to an Antenna or Cable TV 24

Connecting to AV Devices 25

Connecting to a VCR/VCD/DVD Player 25

Connecting to a Video Camera 26

Connecting to a Video Game Console 27

Connecting External Speakers or Headphones...... 28

Connecting the Power Adapter 29

1. Using the TV 30

Using the Remote Control 30

Turning the TV On and Off 30

Selecting Channels 30

Switching Source Signals 30

Adjusting the Volume 30

1. Adjusting On-Screen Display (OSD) Settings 31

OSD Setting Menu 32

Brightness 33

Contrast 34

Video Setting 35

Hue 36

Saturation 37

Sharpness 38

Table of Contents

Color Temperature 39

Audio Setting 40

Treble.... 41

Bass 42

Balance 43

TV Setting 44

TV/CATV 45

MTS 46

Auto Program.... 47

Manual Program.... 48

Channel Add/Erase 49

Miscellaneous Setting 50

OSD Position 51

Language 52

Sleeper.... 53

OSD Display 54

Reset 55

1. Taking Care of Your TV & Remote Control.... 56

12.Troubleshooting.... 57

13.Warranty and Service 59

1. Specifications 60

15.Glossary 61

1

Regulatory Information

FCC Compliance Statement ^1

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Additional Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

DOC Compliance Notice ^1

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. This device complies with Canada ICES-003 Class B.

CE Conformity Statement ^2

This device complies with the requirements set out in the Council Directive on the approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC) and the Amendment Directive (92/31/EEC), Low-Voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC).

1. applies only to products purchased in Canada
2. applies only to products purchased in the European Union

2

Description of Warning Symbols

Before You Proceed

1. Read all Safety Notices in Section 2 of this manual and instructions in the User's Manual carefully before either plugging in or turning the TV on.
2. Keep this User's Manual in a safe place for future reference. Keep the box and packaging in case the TV needs to be shipped in the future.
3. Follow the TV and warning label instructions.
4. Any uses, operations, changes, alterations or modifications of the TV that do not follow the instructions in this manual will void this TV's warranty.

Black triangular warning symbol with white lightning bolt and downward arrow (no text)

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

Black triangular warning symbol with exclamation mark (no text or numbers)

WARNING

This symbol is used to alert users to pay attention to important descriptions regarding usage, maintenance (repair), and additional important information related to this TV.

CAUTION

This symbol is used to alert users to the risk of electric shocks due to dangerous and uninsulated components.

Electric Power Notice

Electric power may cause personal injury and mechanical damage if misused. Although safety has been taken into consideration during the design and production of this TV, electric shock or fire can result if the TV is misused. To prevent potential danger, read and follow the instructions and warnings contained in this manual when setting up, operating or cleaning the TV. In addition, please read all “Safety Notices” contained in this manual carefully before using the TV.

Power Supply Safety Notes

1. To avoid electric shocks, do not use an extended power cord or an outlet that does not match this TV's plug or leaves the plug exposed.
2. This TV has a 3-pin grounded plug. The third pin connects to ground; do not remove it or alter it in anyway.
3. If the power cord or plug is damaged or worn, unplug it immediately and contact an authorized service technician for maintenance.
4. To avoid fire or electric shocks, do not overload electric power outlets.

Installation Safety Notes

Antenna

We suggest that you use an outdoor antenna to get the best signal possible unless you have cable TV or a centralized indoor antenna system. You may, however, use an antenna indoors if it is placed in a location free from interference.

Location

Avoid prolonged exposure to sunlight or other strong sources of heat. Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Power

To avoid danger of fires or electric shock, only use those adapters listed below, which are compatible with this TV.

• EDAC POWER ELECTRONICS CO., LTD.: EA1050E-120
• LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0217B1240

IMPORTANT SAFETY INSTRUCTIONS

Illustration of an open book with a magnifying glass resting on it (no text or symbols visible)

1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

Illustration of a computer monitor with a lightning bolt symbol on top, placed on a surface (no text or labels)

7 Do not block any ventilation openings. Install in accordance with manufacturer's instructions.

Illustration of a computer monitor with a cartoon character emitting smoke, next to a monitor with a clock and a phone (no text or symbols present)

8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Illustration of a plug with a fuse and explosion effect (no text or symbols)

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

	10 Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
	11 Only use attachments/accessories specified by the manufacturer.
	12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
	13 Unplug this apparatus during lightning storms or when unused for long periods of time.
	14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
CAUTION	These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

CAUTION

Personal Safety

	To avoid overloading the power supply, never plug too many electrical devices into an outlet, power strip, or extension cable.
	Dangerous high-voltage electric power components are located inside the TV. To avoid electric shock, do not disassemble the TV in any way.
	Do not place or drop metals, small objects, or flammable materials into the vent of the TV.
	If the TV is dropped, falls down, or is otherwise damaged, unplug the power cord immediately and contact an authorized service technician.
	If any fluid is sprayed or dropped into the TV, contact an authorized service technician.
	The screen of the TV is made of glass. Avoid hitting or scraping it. If the screen is broken, do not touch the broken glass.
	Do not allow children to use the TV unattended.

Installation

Illustration of a TV with steam rising from a pot and a showerhead emitting smoke (no text or symbols)

Do not place the TV in locations where there is excessive steam or dust.

Simple line drawing of a printer with a cloth cover (no text or symbols)

Avoid blocking the TV's vents, do not place the TV on a bed, sofa, carpet, or in a sealed cabinet.

Simple line drawing of a mechanical component with a spring-like feature above it (no text or symbols)

Install the outdoor antenna (not included) away from power transmission lines to avoid possible danger.

Unplug the power cord and antenna connector when there is a storm or when the TV is not in use for long periods to avoid electric shock from lightning.

Operation

	This TV is designed for home power sources as labeled on the casing. Avoid using any other power accessories to avoid electric shock or other damage.
	The plug can be inserted into an outlet in only one direction as shown to the left. Do not alter the plug. Contact an authorized service technician if you cannot plug it in correctly.
	If there is any problem that cannot be resolved according to the instructions given in this manual, contact an authorized service technician immediately. Do not attempt any methods not covered in this manual.

Maintenance

Do not attempt to repair the TV by yourself. Contact an authorized service technician. Ask the service technician to complete a safety inspection before switching the power on after completing any maintenance.

4

Preface

Thank you for purchasing a Hannspree Liquid Crystal Display Television (LCD TV). Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology.

Please carefully read this manual in its entirety before setting up, using or operating your TV. To ensure the safe and correct installation and operations of the TV, it is important that the safety and operation instructions in this manual are followed.

This instruction manual is designed to assist you in setting up and using the TV. The information in this manual has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this manual is subject to change without notice.

To the extent allowed by applicable law, Hannspree California Inc. ("Hannspree") shall not be liable for direct, indirect, special, exemplary, incidental or consequential damages arising from any defect or omission in this manual, even if advised of the possibility of such damages in advance.

Copyright

© Copyright 2004 Hannspree California Inc.

All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying and distribution. No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspree. The TV described in this manual may include copyrighted software of Hannspree (or other third parties). Hannspree (or other third parties) preserves the exclusive rights for copyrighted software, such as the right to distribute or reproduce the copyrighted software. Accordingly, and to the extent allowed by applicable law, any copyrighted software contained in the product described herein shall not be distributed, modified, reverse engineered, or reproduced in any manner without the prior written authorization of Hannspree (or of other third parties).

The Hannspree logos presented herein are trademarks of Hannspree. All other product names, trademarks or logos mentioned herein are used for identification purpose only, and may be the trademarks or registered trademarks of their respective owners.

The purchase of the product described herein shall not be deemed to grant, either directly or by implication, estoppel or otherwise, any license under the copyrights, patents, patent applications or trademarks of Hannspree, except for the normal, non-exclusive use that arises by operation of law in the sale of a product.

5

Introducing the TV

Thank you for purchasing this LCD TV. Your LCD TV is designed to be safe, versatile, and easy to use. The design makes it a fun addition to any room.

You can watch broadcast or cable television channels, and easily connect a VCR, VCD, DVD player or a game device to the standard RCA and S-Video input jacks that are included in the 4-IN-1 A/V cable.

Convenient control buttons located on the TV and a handy remote control let you change channels, adjust the volume, and change display settings through an easy-to-use on-screen display menu system. The built-in stereo speakers provide full rich sound and a convenient audio output port lets you connect to an external audio system or headphones.

Features

• Built-in TV tuner
• 4-IN-1 A/V cable
• On-Screen Display (OSD) menu system
  • Built-in stereo speakers

6

Checking Package Contents

Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged.

• TV
- User's manual
- Quick start guide
- Warranty and service manual
- Power cord
- Power adapter
- 4-IN-1 A/V cable
- Remote control and battery/batteries
- RCA jack x 3
- Stop Card

Control Panel

Description Icon Function
Power	⏻/POWER	Turns the TV on and off.
Power LED		Indicates power status.
Source	SOURCE	Selects the input source to be displayed(TV/CATV, AV or S-Video).
Menu	MENU	Turns the On-Screen Display (OSD) menu on and off.
Select channel	channel up(▶/+ / ▲)channel down(◀/- / ▼)	Changes channels. Press channel up to increase the channel number.Press channel down to decrease the channel number.
Adjust volume	volume up (+)volume down (-)	Press volume up to increase the audio volume. Press volume down to decrease the audio volume.

Input and Output Jacks

Description Connector Function
4-IN-1 (AV, AV IN)		Use the included 4-IN-1 A/V cable to connect external devices, such as a VCR, VCD, DVD player, CVBS RCA cables or a game device. Audio Input: AV connector audio (white and red) cables. Video Input: AV connector video (yellow) or S-Video cable.
ANT		Connects to an antenna or CATV cable television line.
DC-IN (DC-12V)		Connects to the included power adapter.
Headphone / Speakers jack		Connects to headphones or external speakers

Remote Control

Description Icon Function
Menu	MENU/MENU/M	Press this button to activate the OSD menu system and to adjust various settings and personal preferences.
Arrow	▲/▼/◄/►/< / >	Press▲/▼/◄ and ► to scroll through the on-screen display menus.Favorite channels can be selected using the ◀ and ► buttons on the remote control.
Number	1 2 34 5 67 8 90	Use to select a channel directly.Press 0-9 to enter the channel number (press 1 and 0 for channel 10).
Recall/Last	RECALL/LAST	Press this button to return to the last channel selected.
MTS	MTS	Press this button to enable the bilingual function when the program has stereo/SAP/MONO capabilities.This option may not be available in your local area.

Power Turns the TV power on or off.

Adjust volume	-VOL VOL+>VOL VOL<▼VOL VOL▲▲VOL VOL▼▲VOL VOL▶	Press volume up to increase the audio volume. Press volume down to decrease the audio volume.
Description Icon Function
Mute	MUTE	Press this button to eliminate sound. Press mute again or press the volume adjust buttons to restore sound.
Select channel	▼CH CH▲▶CH CH▼-CH CH+	Changes channels. Press channel up to increase the channel number. Press channel down to decrease the channel number. In AV mode, press either button to return to TV mode.
Source	SOURCE	Press this button to cycle the video input sources. The source is displayed on the screen.
Auto (selected models only)	AUTO	Press this button to automatically adjust the screen parameters in PC mode. Only available with 15-inch TVs.
Display (selected models only)	DISPLAY	Press this button to show messages on the screen, such as the channel number. Press this button again to close the displayed message.
Reset (selected models only)	RESET	Press this button to reset the TV.

Inserting the Remote Control Battery/Batteries

Lithium battery/batteries

1 Open the battery compartment cover at the back of the remote control (A).

2 Slide the battery/batteries, with the positive (+) side facing up, underneath the shorter set of metal contacts (B).

3 Press the battery/batteries firmly into place in the battery compartment (C)

4 Replace the battery compartment cover (D).

Simple line drawing of a curved object with an arrow, no text or symbols present

Diagram of a device with a circular component and an arrow pointing to it, labeled 'B' (no text or symbols on the diagram itself)

Simple line drawing of a person sitting on a surface with a downward arrow, no text or symbols present

Simple line drawing of a mechanical component with a downward arrow and circular base (no text or symbols)

Note

Your remote control may have either AAA type batteries or CR2032 lithium battery/batteries.

AAA battery/batteries

1 Open the battery compartment cover at the back of the remote control (A).

Diagram of a mechanical or electronic component with an arrow indicating upward motion (no text or symbols present)

2 Insert the battery/ batteries paying attention to the polarity markings inside the battery compartment (B).

Technical line drawing of a mechanical device with rollers and a handle (no text or symbols)

3 Replace the battery compartment cover (C).

Simple line drawing of a mechanical device with a clip and handle, no text or symbols present

Note Your remote control may have either AAA type batteries or CR2032 lithium battery/batteries.

CAUTION

• If the remote control is not used for a long period, remove the batteries and store them separately.
• Handle damaged or leaking batteries carefully, and wash hands after such handling.
• If your remote control has two batteries, do not mix new and old batteries because the life of the new batteries will be shortened. Chemical fluids may leak from the old batteries.
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions.
• Refer to your local recycling or waste disposal rules and contact a local waste disposal vendor to dispose of used batteries.
• The remote control may have a magnet in it, so do not place magnetic sensitive items such as watches, credit cards, or flash media close to the cover.
• Do not use force when pulling the remote control cover open; you may damage the hinge.

Connecting to an Antenna or Cable TV

1 Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV.
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to the antenna socket or CATV cable.

Note If you cannot receive channels after connecting to an antenna or cable TV line, try scanning for channels. See “Auto Program” on page 47.

Connecting to AV Devices

Connect external devices such as a VCR, VCD, DVD player, or video game console to the TV using the supplied 4-IN-1 A/V cable.

Connecting to a VCR/VCD/DVD Player

The illustration presented here shows how to connect the TV to a VCR, VCD or DVD player. Actual connections may vary according to the make and model of the device. Refer to the user's manual included with the device for more detailed instructions.

graph TD
    A["4-IN-1"] --> B["4-IN-1 A/V jack"]
    B --> C["S-Video connector"]
    C --> D["AV connectors"]
    D --> E["VCD"]
    C --> F["4-IN-1 A/V cable"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333

Note

• The cables are color-coded (black, red, white, yellow). Connect each color-coded cable to the appropriate connector on your device.
• When connecting the S-Video connector and AV connector at the same time, the priority is given to the S-Video connector.

Connecting to a Video Camera

The instructions presented here are a general guide to connecting the TV to a camcorder or other type of digital camera. Actual connections may vary according to the make and model of the device. Refer to the user's manual included with the camcorder or camera for more detailed instructions.

graph TD
    A["4-IN-1"] -->|4-IN-1 A/V jack| B["4-IN-1 A/V cable"]
    B --> C["S-Video connector"]
    C --> D["AV connectors"]
    D --> E["B"]
    D --> F["R"]
    D --> G["W"]
    D --> H["Y"]

Note

The cables are color-coded (black, red, white, yellow). Connect each color-coded cable to the appropriate connector on your device.

Connecting to a Video Game Console

The instructions presented here are a general guide to connecting the TV to a game console using the RCA Jacks (some game devices may require a unique adapter that is not provided). Actual connections may vary according to the make and model of the game device. Refer to the user's manual included with the game console for more detailed instructions.

Notes

• Connect the 4-IN-1 A/V cable connectors to the corresponding connectors on your game device adapter.
• If the 4-IN-1 A/V cable does not fit the game device, then insert RCA jack between the 4-IN-1 A/V cable and game device.

Connecting External Speakers or Headphones

External speakers or headphones may be used to listen to the TV rather than using the built-in speakers. Connect external speakers to the speaker line out port or headphones to the headphone port as illustrated.

Notes

• External speakers or headphones are not included with the TV.
• The internal TV speakers will not output sound when headphones are plugged in.
• Use external speakers with built-in amplifiers only.

Connecting the Power Adapter

1 Connect the power cord to the power adapter as illustrated.
2 Plug the power adapter connector into the DC-IN input jack on the rear panel of the TV.
3 Insert the three-pronged plug at the other end of the power cord into a power outlet.

graph TD
    A["DC-IN"] --> B["DC-IN"]
    B --> C["Power adapter"]
    C --> D["Three-pronged plug"]
    D --> E["Power outlet"]
    C --> F["Power cord"]

Using the Remote Control

For best results, use the remote control within a distance of 16 feet (5 meters) from the front of the TV. Do not exceed an angle of 30 degrees when pointing at the TV.

Notes

• The operational distance may be shortened when the signal sensor is directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and ensure that there are no obstacles between them.

Turning the TV On and Off

1 Press power ⏻ on the remote control or control panel to turn on the TV.
2 Press power ⏻ again; the TV is in off mode.

Selecting Channels

Press channel up or channel down on the control panel to select the channel or enter the specific channel number by pressing the number buttons on the remote control.

Switching Source Signals

Press source to select the incoming source signal.

The current source setting (TV/CATV, AV or S-Video) appears on the upper left corner of the screen.

Adjusting the Volume

Press volume up to increase the volume. Press volume down to decrease the volume. The volume level is displayed on the screen.

10 Adjusting On-Screen Display (OSD) Settings

The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV's settings. This chapter describes how to change each of the available settings.

The OSD can be used with either the remote control or the control panel.

Function Control Panel Icon Button Remote Control Icon

Menu Menu Menu MENU/ENTER, M
Channel up	CH (+ / ▲ / ▶)	Right arrow > / ▶
Channel down	CH (- / ▼ / ◀)	Left arrow < / ◀
Enter Menu Enter MENU/ENTER, M

Note

The following sections explain how to adjust settings in the OSD menus using the control panel.

OSD Setting Menu

Press menu to enter the OSD menus.

The Main menu appears

Note

To exit the OSD menus, press channel up or channel down to select Exit ☐. Then press menu to exit the OSD menus. Also, after you finish setting OSD parameters, follow these instructions to exit the OSD menus.

Brightness

1 Press menu to enter the OSD menus.
2 Press menu again and the brightness slide bar appears.
3 Press channel up to increase the brightness.
4 Press channel down to decrease the brightness.
5 Press menu to confirm the setting and return to the Main menu.

Note

The new setting is confirmed automatically when the OSD times out.

Contrast

1 Press menu to enter the OSD menus.
2 Press channel up or channel down to select Contrast.
3 Press menu. The contrast slide bar appears.
4 Press channel up to increase the contrast.
5 Press channel down to decrease the contrast.
6 Press menu to confirm the setting and return to the Main menu.

Note

The new setting is confirmed automatically when the OSD times out.

Video Setting

Press menu to enter the OSD menus.

1 Press channel up or channel down to select Video Setting.
2 Press menu to enter the Video Setting menu.

Hue

1 Press menu to enter the Hue menu.
2 Press channel up to increase the hue towards the red spectrum. The image becomes more red.
3 Press channel down to decrease the hue towards the green spectrum. The image becomes more green.
4 Press menu to confirm the setting and return to the Video Setting menu.

Note

The new setting is confirmed automatically when the OSD times out.

Saturation

graph TD
    A["Video Setting"] --> B["Saturation"]
    B --> C["50"]
    D["ENTER"] --> E["End"]

1 Press channel up or channel down to select Saturation.
2 Press menu to enter the Saturation menu.
3 Press channel up to increase the saturation. The screen image becomes more vibrant.
4 Press channel down to decrease the saturation. The screen image becomes less vibrant.
5 Press menu to confirm the setting and return to the Video Setting menu.

Note

The new setting is confirmed automatically when the OSD times out.

Sharpness

1 Press channel up or channel down to select Sharpness.
2 Press menu to enter the Sharpness menu.
3 Press channel up to increase the sharpness.
4 Press channel down to decrease the sharpness.
5 Press menu again to confirm the setting and return to the Video Setting menu.

Note

The new setting is confirmed automatically when the OSD times out.

Color Temperature

1 Press channel up or channel down to select Color.
2 Press menu to enter the Color menu. The following three color temperatures are available.

Standard Color

Press channel up or channel down to select Standard, then press menu.

Warm Color

Press channel up or channel down to select Warm, then press menu.

Cold Color

Press channel up or channel down to select Cold, then press menu.

Note

The new setting is confirmed automatically when the OSD times out.

Audio Setting

Press menu to enter the OSD menus.

1 Press channel up or channel down to select Audio Setting.
2 Press menu to enter the Audio Setting menu.

Treble

1 Press menu to enter the Treble menu.
2 Press channel up to increase the treble.
3 Press channel down to decrease the treble.
4 Press menu to confirm the setting and return to the Audio Setting menu.

Note

The new setting is confirmed automatically when the OSD times out.

Bass

1 Press channel up or channel down to select Bass.
2 Press menu to enter the Bass menu.
3 Press channel up to increase the bass.
4 Press channel down to decrease the bass.
5 Press menu to confirm the setting and return to the Audio Setting menu.

Note

The new setting is confirmed automatically when the OSD times out.

Balance

1 Press channel up or channel down to select Balance.
2 Press menu to enter the Balance menu.
3 Press channel up to shift the balance to the right speaker.
4 Press channel down to shift the balance to the left speaker.
5 Press menu to confirm the setting and return to the Audio Setting menu.

Note The new setting is confirmed automatically when the OSD times out.

TV Setting

Press menu to enter the OSD menus.

1 Press channel up or channel down to select TV Setting.
2 Press menu to enter the TV Setting menu.

TV/CATV

1 Press menu to enter the TV/CATV menu. The following choices are available.

Receiving Cable TV

Press channel up to select CATV, then press menu.

Receiving Broadcast TV

Press channel down to select TV (default), then press menu.

Note The new setting is confirmed automatically when the OSD times out.

MTS

1 Press channel up or channel down to select MTS.
2 Press menu to enter the MTS menu.

Stereo

1 Press channel down to select Stereo. Stereo is highlighted in red.
2 Press menu again to confirm the selection.

SAP

1 Press channel up or channel down to select SAP. SAP is highlighted in red.
2 Press menu again to confirm the selection. This option may not be available in your local area.

Mono

1 Press channel up to select Mono. Mono is highlighted in red.
2 Press menu to confirm Mono, which outputs sound through a single channel.

Note

The new setting is confirmed automatically when the OSD times out.

Auto Program

graph TD
    A["TV Setting"] --> B["AUTO SET"]
    B --> C["AUTO Program"]
    C --> D["YES"]
    C --> E["NO"]
    F["ENTER"] --> G["→"]

1 Press channel up or channel down to select Auto Program.
2 Press menu to enter the Auto Program menu.
3 Press channel up or channel down to select Yes or No.
4 Press menu.

Channel indicator values range from 2 to 69 (antenna connection) or from 1 to 125 (CATV cable connection).

Manual Program

This function allows you to search preset channels or to erase previously preset channels.

graph TD
    A["TV Setting"] --> B["Manual Program"]
    B --> C["Down"]
    B --> D["Up"]
    B --> E["3"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333

1 Press channel up or channel down to select Manual Program.
2 Press menu to enter the Manual Program menu.
3 Press channel up or channel down to find the channel you want to add.
4 When you have found the channel, press menu.

When you have found the channel, see the next section "Channel Add/Erase" to add or erase the channel.

Channel Add/Erase

After you found a channel using Manual Program, follow the following instruction to add or erase the channel.

1 Press channel up or channel down to select CH. Add/Erase.
2 Press menu to enter the CH. Add/Erase menu. Select one of the following options.

Add Channel

1 Press channel up to select Add.
2 Press menu to add the selected channel.

Erase Channel

1 Press channel down to select Erase.
2 Press menu to delete the selected channel.

When you return to the normal TV screen and use channel up and channel down to browse channels, an erased channel (for example, Channel 3) is skipped automatically.

Note

You can still access the erased channel by entering the channel number using the number keys on the remote control.

Miscellaneous Setting

Press menu to enter the OSD menus.

1 Press channel up or channel down to select Miscellaneous Setting.
2 Press menu to enter the Miscellaneous Setting menu.

OSD Position

1 Press menu to enter the OSD Position menu. The following options are available.

Horizontal Position

1 Press menu.
2 Press channel down to move the OSD screen to the left. Press channel up to move the OSD screen to the right.
3 Press menu to confirm the setting.

Vertical Position

1 Press channel up or channel down to select V. Position.
2 Press menu.
3 Press channel down to move the OSD screen downward. Press channel up to move the OSD screen upward.
4 Press menu to confirm the setting.

Language

graph TD
    A["Miscellaneous"] --> B["Language"]
    B --> C["English"]
    C --> D["Espanol"]
    D --> E["ENTER"]

1 Press channel up or channel down to select Language.
2 Press menu to enter the Language menu. The screen displays the available OSD languages: English and Español.
3 Press channel up or channel down to select a language.
4 Press menu to confirm your choice.

Sleeper

The Sleeper turns the TV off automatically after a set period of time.

1 Press channel up or channel down to select Sleep.
2 Press menu to enter the Sleep menu.
3 The screen displays the available sleep timer setting:

• OFF
• 30 minutes
• 60 minutes
• 90 minutes
• 120 minutes

4 Press channel up or channel down to select a setting.
5 Press menu to confirm your choice.

OSD Display

When set to Off, the OSD display (source data on top left corner of the TV screen) turns off after approximately 5 seconds. When set to On, the OSD does not turn off automatically.

1 Press channel up or channel down to select OSD Display.
2 Press menu to enter the OSD Display menu.
3 Press channel up or channel down to select On or Off.
4 Press menu to confirm your choice.

Reset

The Reset function returns all of your TV's user settings to their factory defaults.

Warning:

The reset function will erase all of your custom settings, and will reset all display settings (such as contrast, brightness, etc.) to the factory default values. The reset function cannot be reversed once it begins.

1 Press channel up or channel down to select Reset.
2 Press menu to enter the Reset menu.
3 Press channel up or channel down to select Yes or No. By default, No is already selected (highlighted in red).
4 Press menu to confirm your choice.

11 Taking Care of Your TV & Remote Control

Turn the power off before you begin cleaning the TV.

For best results, use a clean lens cloth to remove dust and fingerprints from the screen.

Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid damaging the finish. Wipe the shell with a dry soft cloth and use neutral cleaning fluids.

If your model has leather components, wipe the leather parts with a dry cloth and keep the area dry. Place the TV far from sources of steam to avoid making the leather wet.

Be careful to disconnect the power plug correctly. Hold the plug. Do not attempt to disconnect the plug by pulling on the power cord.

Arrange and store the power cord neatly as shown to the left to avoid knotting or bending which may cause fire due to damage or electric leakage.

Note

Protect the remote control from shock or vibration to avoid damage.

Do not place the remote control in hot or humid locations.

Situation Solution
No picture and sound.	Connect the power cord properly.Check if the power LED is on or not.Press power on the control panel or remote control.Press source to cycle through connected video sources.Press channel up or channel down to switch to other TV stations.Check the TV/CATV OSD settings. See “TV/CATV” on page 45.Make sure all cables are connected properly.
No picture, or poor picture, sound is OK.	Check the antenna and cable connections.Adjust the brightness in the OSD menus.See “Brightness” on page 33.
Picture is not in color.	Adjust the saturation in the OSD menus.See “Saturation” on page 37.Make sure all the cables are connected properly.
Picture is OK, no sound.	Make sure the source device is functioning properly.Make sure the audio cable is connected securely.Turn the mute off.Press volume up on the control panel or remote control.Make sure the MTS option is set to Stereo, SAP, or Mono. See “MTS” on page 46.
One of the speakers has no sound.	Adjust the balance in the OSD menus. See “Balance” on page 43.Make sure the audio cable is connected securely.
Cannot receive some TV channels using cable TV.	Try the Auto Program function in the OSD “TV Setting” menu. See “Auto Program” on page 47.
Want to reset TV settings.	Use the Reset function in the OSD menu.See “Reset” on page 55.
Cannot operate menus.	·If OSD items are colored in light blue, the system is in a state such that those settings are not available.
Screen image turns over.	·Make sure the video signal cable is connected properly.
Snow appears on the screen.	·Adjust the location of the antenna, placing it far from roads or sources of interference.·Check the antenna and the video signal line connections.
Blurred or overlapped images.	·Readjust the sharpness setting.·Choose programs with high quality signals.·Adjust the direction of the antenna or change the video signal cable.
Remote control doesn’t work.	·Make sure the battery is inserted correctly.·Replace the battery with a new one.·Make sure the TV power cord is plugged in.·Make sure the path between the remote control and the sensor is clear.·Try operating the remote control at a closer distance to the TV. Refer to “Using the Remote Control” on page 30.

13

Warranty and Service

For complete warranty service information, please refer to the "Warranty and Service Manual" enclosed with your TV.

9.6 / 12.1-inch LCD TV
LCD Panel Size 9.6 / 12.1-inch TFT
Aspect Ratio 4:3
Display Resolution 800 (horizontal) x 600 (vertical)
TV System NTSC
Video System	S-Video Input and Composite Video Input (through the 4-IN-1 A/V cable)
Audio System	Input: RCA Jack (L/R Audio Input with the 4-IN-1 A/V cable)Output: 3.5mm ø headphone jack x 1
Built-in Speakers 2W + 2W / 3W + 3W
Power Supply 100-240V, 50/60 Hz, 12V DC
Power Consumption 60 W Maximum
Optional Accessories External Speakers

Aspect Ratio: The ratio of width to height of a film, image or display screen.

Broadcast TV: Broadcasting video signals using high-frequency electromagnetic waves to distribute television channels to viewers (standard TV broadcast).

CATV: Community Antenna Television, the original name for cable TV. A television distribution system that uses coaxial cable instead of the traditional radio broadcasting (over-the-air) method to deliver television, FM radio, and other services to consumers.

Color Temperature: Adjusting the color temperature enables you to set the intensity of white light. Color temperature is measured in Kelvin (K). Higher color temperatures result in a blue tint. Lower temperatures result in a red tint.

Hue: Colors in a color system are measured by hue, saturation and luminance. Hue indicates the predominant color.

LCD (Liquid Crystal Display): A display technology that uses rod-shaped molecules (liquid crystals) that flow like liquid and bend light.

MTS: Multi-channel Television Sound. Enables reception of audio other than the primary (stereo) audio signal. SAP (Second Audio Program) enables reception of a separate channel that may be a different language or completely different information such as the news.

OSD (On-Screen Display): A control panel on the television screen that allows you to select viewing options.

Saturation: Chromatic purity indicating the amount of white contained in a color. Fully saturated colors are pure colors; less saturated colors appear as pastel shades.

Stereo: is the default audio signal belonging to a particular channel.

S-Video: Separate video, a video cabling standard used to transmit video by keeping brightness (Y) and color information (C) on

separate channels. Most often used with camcorders, VCRs, and quality receivers and amplifiers to provide sharper pictures.