VQGI5301NSS - Grill VIKING - Free user manual and instructions

Product Type	Outdoor Gas Grill
Brand	Viking
Model	VQGI5301NSS
Construction Material	Heavy-duty stainless steel
Overall Width	Approximately 30 inches
Overall Depth	Approximately 24 inches
Overall Height	Approximately 50 inches (including lid)
Weight	Approximately 150 lbs
Fuel Type	Natural gas or liquid propane (convertible)
Number of Main Burners	4
BTU Output (Main Burners)	Approximately 60,000 BTU total
Cooking Area	Approximately 600 sq. in.
Ignition Type	Electronic ignition
Temperature Gauge	Built-in lid thermometer
Handle Style	Professional-style stainless steel
Hinges	Fully concealed door hinges
Leveling Legs	Heavy-duty adjustable legs
Warranty	Two year outdoor warranty
Cleaning and Maintenance	Use mild soap and water; stainless steel cleaner recommended; check burner tubes regularly
Safety Features	Keep away from combustibles; install with proper clearance; use regulator and hose as specified

Frequently Asked Questions - VQGI5301NSS VIKING

What type of fuel does the Viking VQGI5301NSS grill use?

The grill is designed for natural gas but can be converted to liquid propane with a conversion kit (sold separately). Always follow the manufacturer's instructions for conversion.

How do I clean the stainless steel surfaces?

Use a mild soap and water solution with a soft cloth. For stubborn stains, use a stainless steel cleaner and always wipe in the direction of the grain to avoid scratches.

What is the recommended clearance from combustible materials?

The grill must be installed with at least 3 inches of clearance from non-combustible surfaces and more from combustible materials. Refer to the installation guide for exact distances.

Can I install this grill in an outdoor kitchen island?

Yes, Viking offers back panels and side panels designed for island installations. Ensure proper ventilation and clearance requirements are met. See the outdoor kitchen planning guide for details.

How do I adjust the leveling legs?

Each leg can be turned to raise or lower the grill. Adjust to ensure the grill is level and stable on uneven surfaces. The legs allow adjustment from 34-1/4 inches to 36 inches.

What is the warranty coverage?

The grill comes with a two-year outdoor warranty covering defects in materials and workmanship. Certain components may have different warranty periods. Keep your purchase receipt.

What should I do if the burners do not ignite?

Check that the gas supply is on and the tank (if LP) has fuel. Ensure the ignition battery is fresh and the burner tubes are clean. If problems persist, consult a professional.

Can I use the grill in cold weather?

The grill is designed for outdoor use in various weather. However, extreme cold may affect performance. Preheating for a longer period is recommended.

How often should I check the gas connections for leaks?

Check all gas connections before each use. Apply a soapy water solution to connections; bubbles indicate a leak. If a leak is found, turn off gas and tighten connections or replace parts.

Where can I find replacement parts?

Replacement parts are available through Viking authorized dealers or the Viking website. Use only genuine Viking parts to ensure safety and performance.

USER MANUAL VQGI5301NSS VIKING

Outdoor setup of a Viking-style outdoor grill with menu grilles and a tree in the background (no text or symbols on main objects)

2017 OUTDOOR KITCHEN PLANNING GUIDE

Outdoor kitchen setup with wooden cabinets, stainless steel ovens, and a large outdoor display (no visible text or symbols)

Outdoor camping scene with wooden boats, a lighthouse, and a forested mountain backdrop (no visible text or symbols)

Viking Professional

OUTDOOR KITCHEN

The Viking Professional outdoor products offer everything you'd expect to find in a kitchen – except the walls. Of course, our heavy-duty gas grills are the pinnacle of barbecue, but you might be surprised to find products like warming drawers, undercounter refrigerators, and even vent hoods in the backyard. Mother Nature likes to entertain too.

Nighttime outdoor scene of a modern kitchen with illuminated grilles, decorative plants, and warm lighting (no visible text or symbols)

■ Commercial-type construction, design and styling
- Constructed completely of heavy-duty stainless steel
■ Fully concealed door hinges
■ Professional-style handles match Viking outdoor appliances
- Drawers equipped with full extension slides
■ Heavy-duty adjustable legs
- Optional toe kick included
■ Two year outdoor warranty

VQBO4121

41 7/8"W. x 29 7/8"D. x 34 1/2"H. grill base
- For use with any Viking 42"W. Outdoor 5 Series grill
■ Shipping wt. 235 lb (106.6 kg)

VQB05322

53 7/8"W. x 29 7/8"D. x 34 1/2"H. grill base
- For use with any Viking 54"W. Outdoor 5 Series grill
■ Shipping wt. 279 lb (126.6 kg)

Exterior view of a modern stainless steel kitchen appliance with double boiler, control knobs, and side drawers (no visible text or symbols)

VQBO4121

Exterior view of a modern stainless steel cooktop appliance with open lid and side drawers (no visible text or symbols)

VQBO5322

*Note - grill is not included with the cabinet and must be purchased separately. All cabinets must be installed with locally supplied countertops.

GRILL BASE WITH WARMING DRAWER ACCESS - 30" DEPTH

■ Commercial-type construction, design and styling
- Constructed completely of heavy-duty stainless steel
■ Fully concealed door hinges
■ Professional-style handles match Viking outdoor appliances
- Drawers equipped with full extension slides
■ Heavy-duty adjustable legs
- Optional toe kick included
■ Two year outdoor warranty

VQWO4120

• 41 7/8"W. x 29 7/8"D. x 34 1/2"H. grill base with warming drawer
• For use with any Viking 42"W. Outdoor 5 Series grill and 36"W. outdoor warming drawer
  ■ Shipping wt. 226 lb (102.5 kg)

VQW05311

53 7/8"W. x 29 7/8"D. x 34 1/2"H. grill base
- For use with any Viking 54"W. Outdoor 5 Series grill and 36"W. outdoor warming drawer
■ Shipping wt. 265 lb (120.2 kg)

Exterior view of a modern stainless steel kitchen appliance with open lid and control panel (no visible text or symbols)

VQWO4120 VQWO5311

Exterior view of a modern stainless steel cooktop appliance with open lid and control knobs (no visible text or symbols)

*Note - neither grill nor warming drawer is included with the cabinet and must be purchased separately. All cabinets must be installed with locally supplied countertops.

DOUBLE SIDE BURNER BASE - 30" DEPTH

■ Commercial-type construction, design and styling
- Constructed completely of heavy-duty stainless steel
■ Fully concealed door hinges
■ Professional-style handles match Viking outdoor appliances
- Heavy-duty adjustable legs
- Optional toe kick included
■ Two year outdoor warranty

VBBO1601

16"W. x 29 7/8"D. x 34 1/2"H. side burner base
■ For use with Viking Outdoor double side burners
- Shipping wt. 104 lb (47.2 kg)

Exterior view of a stainless steel kitchen appliance with control knobs and a door (no visible text or symbols)

VBBO1601

*Note - the VGSB burners are not included with the cabinet and must be purchased separately. All cabinets must be installed with locally supplied countertop.

■ Commercial-type construction, design and styling
■ Constructed completely of heavy-duty stainless steel
■ Fully concealed door hinges
■ Professional-style handles match Viking outdoor appliances
■ Heavy-duty adjustable legs
- Optional toe kick included
■ Two year outdoor warranty

VBBO2602

26"W. x 29 7/8"D. x 34 1/2"H. multi-use base
■ For use with Viking Outdoor wok
- Shipping wt. 160 lb (72.6 kg)

Exterior view of a stainless steel kitchen appliance with two doors and top cabin (no visible text or symbols)

VBBO2602

*Note - appliance is not included with the cabinet and must be purchased separately. All cabinets must be installed with locally supplied countertop.

UNDERCOUNTER REFRIGERATION BASE - 30" DEPTH

■ Commercial-type construction, design and styling
- Constructed completely of heavy-duty stainless steel
■ Heavy-duty adjustable legs
- Optional toe kick included
■ Two year outdoor warranty

VURO3200

32"W. x 30"D. x 34 1/2"H. refrigeration base
- For use with Viking 24"W. refrigeration products
■ Shipping wt. 125 lb (56.7 kg)

Exterior view of a stainless steel industrial refrigerator with open door and side panel (no visible text or symbols)

VURO3200

*Note – refrigeration units are not included and must be purchased separately. All cabinets must be installed with locally supplied countertops.

OUTDOOR STAINLESS STEEL BASE CABINETS - 30" DEPTH

• Commercial-type construction, design and styling
• Constructed completely of heavy-duty stainless steel
  ■ Fully concealed door hinges
  ■ Professional-style handles match Viking outdoor appliances
  ■ Heavy-duty adjustable legs
• Optional toe kick included
  ■ Two year outdoor warranty
  ■ For general use in cabinet runs

VBO1811 - BASE CABINET

18"W. x 29 7/8"D. x 34 1/2"H. base cabinet
■ Shipping wt. 141 lb (63.7 kg)

VB01830 - DRAWER CABINET

18"W. x 29 7/8"D. x 34 1/2"H. base cabinet
- Shipping wt. 156 lb (70.8 kg)

VSBO2402 - SINK BASE CABINET

24"W. x 29 7/8"D. x 34 1/2"H. sink base cabinet
- Shipping wt. 165 lb (74.8 kg)

VTPO1810 - TRASH PULLOUT CABINET

18"W. x 29 7/8"D. x 34 1/2"H. trash pullout base cabinet
■ Shipping wt. 145 lb (65.8 kg)

Exterior view of a modern stainless steel kitchen cabinet with two drawers (no text or symbols visible)

VBO1811

Exterior view of a modern office cabinet with three drawers (no signage or text visible)

VBO1830

Modern stainless steel kitchen sink with two sinks and a faucet on top (no text or symbols visible)

Exterior view of a modern office building (no signage)

VTPO1810VSBO2402

FILLER STRIPS

• Attach between cabinets to separate cabinets and create turns
• Sides are to be mounted flush with doors and not the cabinet face

■ Optional toe kick included

■ Two year outdoor warranty

VCF90

■ Each side is 2 3/4"W.
■ Corner filler strip for use in 90° cabinet bends
■ Shipping wt. 5 lb (2.3 kg)

VCF135

■ Each side is 2 3/4"W.
■ Corner filler strip for use in 135° cabinet bends
■ Shipping wt. 5 lb (2.3 kg)

VFLR4

3 3/4"W.
■ General filler strip used to separate appliance based cabinets
■ Shipping wt. 5 lb (2.3 kg)

VFLR8

8"W.

■ General filler strip used to separate appliance based cabinets
- Shipping wt. 9 lb (4.1 kg)

VOCF90

■ Each side is 8"W.
■ Shipped with two unattached back panels

- Outer corner filler strip used to connect two back panels at a 90° angle and add countertop support

■ Shipping wt. 40 lb (18.1 kg)

VOCF135

Each side is 4"W.
■ Shipped with two unattached back panels

- Outer corner filler strip used to connect two back panels at a 135° angle and add countertop support

■ Shipping wt. 40 lb (18.1 kg)

CABINET SIDE PANELS

■ Heavy-duty stainless steel

- Used to finish sides of base cabinets at the end of the cabinet run

■ Fit flush into recessed sides of cabinets
■ Optional toe kick included
■ Two year outdoor warranty

VSP30

30"W. x 29 3/4"H. multi-use base
■ Shipping wt. 16 lb (7.3 kg)

VIKING BACK PANELS FOR USE IN CUSTOM ISLAND APPLICATIONS

■ Heavy-duty stainless steel
■ For use in custom island installations
■ Individual back panels for each Viking outdoor cabinet
- 3/4" thickness will add to the depth of the cabinetry
■ Optional toe kick included
■ Two year outdoor warranty

VBP16

16"W. back panel
For use with VBBO1601
- Shipping w. 10 lb (3.7 kg)

VBP18

18"W. back panel
■ For use with VBO1811/VBO1830/VTPO1810
■ Shipping wt. 12 lb (5.4 kg)

VBP24

24"W. back panel
For use with VSBO2402
■ Shipping wt. 15 lb (6.8 kg)

VBP26

26"W. back panel
■ For use with VBBO2602
■ Shipping wt. 17 lb (7.7 kg)

VBP32

32"W. back panel
■ For use with VURO3200
■ Shipping wt. 21 lb (9.5 kg)

VBP41

41"W. back panel
■ For use with VQBO4121/VQWO4120
■ Shipping wt. 25 lb (11.3 kg)

Simple line drawing of a rectangular frame with corner brackets (no text or symbols)

VBP32

VBP53

53"W. back panel
For use with VQBO5322/VQWO5311
■ Shipping wt. 32 lb (14.5 kg)

VBPFLR4

4"W. back panel
For use with VFLR4
■ Shipping wt. 5 lb (2.3 kg)

VBPFLR8

8"W. back panel
For use with VFLR8
■ Shipping wt. 9 lb (4.1 kg)

Outdoor kitchen setup with outdoor cooktop, stainless steel oven, and leafless trees in the background (no visible text or symbols)

Viking Professional Outdoor

KITCHEN PLANNING

Anticipate your requirements for your outdoor kitchen to get the most flexibility during its use. With a complete Viking outdoor kitchen, you noW. have not only a complete line of outdoor appliances, but also the cabinets that provide the same storage and organizational capabilities of an indoor kitchen. NoW. you can prepare your appetizers, drinks and food outside while remaining part of the group, rather than having to go inside.

Outdoor kitchen setup with a Viking refrigerator, stainless steel appliances, and outdoor tableware (no visible text or symbols)

Exterior view of a modern outdoor grill with open doors, surrounded by garden plants and bottles (no signage)

COMMON INSTALLATIONS

For actual assembly of individual cabinets, please refer to Viking installation instructions

IN GENERAL

The cabinets have been designed to be easily installed by contractor or consumer. The cabinets are designed completely of stainless steel and provide a rich, contemporary look that complements Viking outdoor appliances. The cabinets are 34-1/2" high where the toe kick area is 4-1/2". Locally supplied countertops must be mounted on top. The leveling legs on each cabinet alloW. for adjustments on uneven surfaces. The leveling legs alloW. for a minimum adjustment of 34-1/4" and a maximum of 36". Typically, the first cabinet is placed at the highest point and the other cabinets are leveled from there. To gain the most flexibility from the kitchen design, separate all appliances by at least one base cabinet or with available 4"W. or 8"W. fillers (VFLR4/VFLR8). Remember to account for the 8" minimum the rotisserie motor requires for installation when placing cabinets next to a grill base. All cabinets are 30" deep.

The cabinets can be installed against a house, a masonry, a stucco half-wall or freestanding in an island configuration. A stainless side panel (VSP30) is available to finish ends where a wall doesn't exist. Each cabinet is leveled using the attached leveling legs and then together. Choose a countertop material of 1-1/4" (like granite, quartz, etc.) or more (other stone, tile, etc.). If the countertop is greater than 1-1/4" thick, you should use shims (not included) to install the appliance (grill, side burner, wok) flush to the countertop. After the countertop is installed the appliances are placed in them and the kitchen is complete.

Note: The full weight of the appliance must be set on the solid bottom support, including shims if necessary, and not supported by the countertop side trim.

AGAINST A NON-COMBUSTIBLE SURFACE

When installing a run of cabinets that includes a grill base against a non-combustible surface, the back of the cabinets should be at least 3" from the wall to insure meeting the grill specifications. When this is the case, a 4"W. back panel (VBPFLR4) along with a 30" Side Panel (VSP30) can be used to finish the end of the cabinet run. The VBPFLR4 is screwed into the back of the cabinet that ends the run and matches up against the VSP30.

EXAMPLE:

If any of the undercounter refrigeration products are installed in the cabinet run, a VURO3200 should be installed to alloW. for solid installation of the side panel and to make a strong base on which the countertop will sit. If the refrigeration falls in the end of a run a, 30"W. side panel (VSP30) should be used. If used in conjunction with a Viking outdoor grill, a VBPFLR4 should be used along with the VSP30 to insure meeting grill specifications.

ISLAND INSTALLATIONS

The cabinets can also be installed in an island format. If desired, a half-wall can be built at the back and side panels (SP30) can be used to finish the sides. All the cabinets will be lined up flush at the face, or a 3-sided half-wall could be built to eliminate the side panels.

Alternatively, islands can be finished with Viking produced back panels. There are individual panels made to fit each individual cabinet offered by Viking. The result is a smooth, custom fit finish.

EXAMPLE:

EXAMPLE WHEN REFRIGERATION ENDS THE RUN:

Note: If a VFLR4 is used in an island setting, a VBPFLR4 is used as the back panel.

INSTALLATIONS REQUIRE A 4"W. FILLER STRIP

There are several situations where 4"W. back panel (VBPFLR4) and back panels need to be used. The VLFR4 is a 4"W., 34-11/42"H. (includes 4-11/42" toe kick area) stainless steel "post" sandwiched between two cabinets.

1. Use a 4"W. filler whenever two Viking appliances are installed side-by-side in the run. This will give the appliances ample room for any clearance issues they may have in their general specifications. Remember that 8" is required for proper installation of the rotisserie motor on a grill.
2. Use a 4"W. back panel whenever a Viking outdoor grill is used in a layout against a non-combustible surface (such as a brick wall). The general specifications for the grill require 3" of space between the back of the grill and any non-combustible surface. The 4"W. back panel accounts for this. (See sample drawing on page 9)
3. If a VFLR4 is used in an island setting, a VBPFLR4 is used as the back panel.
4. Use the 4"W. filler whenever extra room in your cabinet layout is desired.

INSTALLATIONS REQUIRING 90° AND 135° INNER AND OUTER FILLER STRIP

Many installations include a "turn" in the layout. These turns can follow: a back wall, or they may exist in an island setting. If a layout such as this is designed, 90 or 135 degree filler strips will need to be used. IMPORTANT: When using a VCF90, do not install a warming drawer base cabinet directly adjacent to a VBO1830 or VTPO1810. The cabinet drawers will not be allowed to fully extend due to the warming drawer handle.

WHEN TO USE INSIDE FILLER STRIPS BY THEMSELVES (SEE SAMPLE DRAWING BELOW)

Use a 90° (VCF90) or 135° (VCF135) inside filler whenever you have a 90 or 135 degree turn. If the layout is against a wall, no outer corner filler will be needed. The countertop will run into the wall. Your locally-supplied countertop installer will need to account for the void area underneath the countertop that falls in between the cabinets.

WHEN TO USE INSIDE AND OUTSIDE FILLER STRIPS TOGETHER (SEE SAMPLE DRAWING BELOW)

In situations where the back of your cabinet layout is exposed, such as in an island setting, inside and outside filler strips will need to be used. Use a 90° (VCF90) or 135° (VCF135) inside filler whenever you have a 90 or 135 degree turn. Depending on which turn you are accounting for, a 90° (VOCF90) or 135° (VOCF135) outer corner back panel assembly must be used to complete the layout. These assemblies consist of a 4"W. stainless steel "post", two mounting brackets, and two stainless steel back panels.

The post is placed in the middle corner of the void area (see diagram below) and the back panels are attached to it. The post gives support to the void area underneath the countertop that falls in between the cabinets. Next, the supplied brackets are attached to the inside of the two adjacent cabinets in the run. The stainless steel back panels are then attached to the brackets and fit flush with the back panels attached to the back of the cabinets to the right and left of the center post.

EXAMPLE WHEN USING VCF135 AND VOCF135 IN AN ISLAND SETTING

The installation examples shown in this guide represent basic installations that may be encountered in common installations. Please contact Viking, your Viking Dealer or your Viking Distributor with any questions you might have regarding these or any other installations.

Viking Professional Outdoor Typical Kitchen

LAYOUT PACKAGES

A series of small, medium and large typical outdoor kitchen layouts, using the Viking stainless steel outdoor cabinetry product line.

ELEVATION VIEW

1-1/4" thick countertop pieces supplied by local source

Modern kitchen appliance with stainless steel oven, built-in cabinet, and open door (no visible text or symbols)

WALL INSTALLATION

1 VQWO4120
1 VURO3200
1 VTPO1810
1 VBO1830
2 VSP30
2 VBPFLR4

ISLAND INSTALLATION

1 VQWO4120
1 VURO3200
1 VTPO1810
1 VBO1830
2 VSP30
1 VBP41
1 VBP32
2 VBP18

ELEVATION VIEW

1-1/4" thick countertop pieces supplied by local source

Modern kitchen setup with stainless steel cabinets, a large oven, and a shared sink (no visible text or symbols)

WALL INSTALLATION

1 VQWO5311

1 VBO1830

1 VTPO1810

1 VSBO2402

1 VURO3200

2 VSP30

2 VBPFLR4

ISLAND INSTALLATION

1 VQWO5311

1 VURO3200

1 VTPO1810

1 VBO1830

1 VSBO2402

2 VSP30

1 VBP53

1 VBP32

1 VBP24

2 VBP18

ELEVATION VIEW

1-1/4" thick countertop pieces supplied by local source

Modern kitchen appliance with large oven, front pane, and side table (no visible text or symbols)

WALL INSTALLATION

1 VQWO5311
1 VBO1830
1 VTPO1810
1 VSBO2402
1 VURO3200
2 VSP30
2 VBPFLR4

ISLAND INSTALLATION

1 VBO1830
1 VSBO2402
1 VQWO5311
1 VTPO1810
1 VURO3200
2 VSP30
2 VBP18
1 VBP24
1 VBP32
1 VBP53

ELEVATION VIEW

1-1/4" thick countertop pieces supplied by local source

Modern kitchen setup with large oven, front cabinets, and a rooftop stove (no visible text or symbols)

WALL INSTALLATION

1 VURO3200

1 VSBO2402

1 VTPO1810

1 VQWO4120

1 VBBO1601

1 VBO1830

1 VFLR4

1 VSP30

1 VTHP30

2 VBPFLR4

ISLAND INSTALLATION

1 VURO3200

1 VSBO2402

1 VTPO1810

1 VQWO4120

1 VBBO1601

1 VBO1830

1 VSP30

1 VTHP30

1 VTBP32

1 VFLR4

2 VBP18

1 VBP16

1 VBP41

1 VBP32

1 VBP24

ELEVATION VIEW

1-1/4" thick countertop pieces supplied by local source

Modern stainless steel kitchen with large doors and shared appliances (no visible text or symbols)

Modern stainless steel kitchen appliance with open oven and side cabinets (no visible text or symbols)

INSTALLATION

1 VURO3200

1 VSBO2402

1 VTPO1810

1 VQWO4120

1 VBBO1601

1 VBO1830

1 VFLR4

1 VSP30

1 VBPFLR4

1 VBP41

1 VBP32

1 VBP24

1 VBP26

1 VBP18

1 VCF90

1 VOCF90

1 VBPFLR4

PLAN AND ELEVATIONS GRAPHIC SYMBOLS 31/48" = 1'-0'

VQWO4120

VQWO5311

Exterior view of a white electric stove appliance with a 42-inch height measurement label (no other text or symbols visible)

VQWO4120

Exterior view of a modern kitchen appliance with a 54-inch height measurement label (no other text or symbols)

VQWO5311

VBBO1601

VBBO2602

VURO3200

VBBO1601

Exterior view of a stainless steel kitchen appliance with two doors and top cabin (no visible text or symbols)

VBBO2602

Exterior view of a modern stainless steel enclosure with lid and front panel (no visible text or symbols)

VURO3200

Planning Your Viking Outdoor Kitchen

VSP30 (plan)

COUNTERTOP SIZING GUIDELINES FOR WALL INSTALLATIONS

While it is always recommended that field templates be used to exactly determine countertop sizes on outdoor cabinet layouts, the dimensions above, and following rules will be helpful in planning and costing countertop installations:

1. Depth of counter, with a 31/44" nominal overhang, will be 34-31/44" when 4" fillers (VFLR4) are used against house walls. The depth will be 30-31/44" when no fillers are used. Note: Fillers must be used if a grill is installed in the cabinet run.
2. Notches in the countertop front edge (11/42" x 1-11/42") are required at all grill, side burner, and wok burner cutouts.
3. Total width of countertop modules is determined by adding up the width of each cabinet and filler, in the run, and adding 31/44" for each end overhang, and 3/4" for each back panel (if a 90° layout has exposed (island) backs. No dimension should be added for side panels (VSP30), as they fit flush into the cabinet end.
4. Countertop thickness should be 1-11/44". Any thicker countertop will require that grills, wok burners and side burners be shimmed (shims locally supplied), to install flush with the tops.

COUNTERTOP SIZING GUIDELINES FOR ISLAND INSTALLATIONS

While it is always recommended that field templates be used to exactly determine countertop sizes on outdoor cabinet layouts, the dimensions above, and following rules will be helpful in planning and costing countertop installations:

1. Depth of counter, with a 31/44" nominal overhang, front and back, will be 32-11/44".
2. Notches in the countertop front edge (11/42" x 1-11/42") are required at all grill, side burner, and wok burner cutouts.
3. Total width of countertop modules is determined by adding up the width of each cabinet and filler, in the run, and adding 31/44" for each end overhang, and 3/4" for each back panel (if a 90° layout has exposed (island) backs. No dimension should be added for side panels (VSP30), as they fit flush into the cabinet end.
4. Countertop thickness should be 1-11/44". Any thicker countertop will require that grills, wok burners and side burners be shimmed (shims locally supplied), to install flush with the tops.

Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA For product information, call 1-888-845-4641 or visit vikingrange.com.

© 2016 VIKING RANGE, LLC. ALL RIGHTS RESERVED.