US-16-150W - Switch Ubiquiti Networks - Free user manual and instructions

Product Type	Managed Gigabit Switch with PoE+
Model	US-16-150W
Dimensions	443 x 43 x 221 mm (17.44 x 1.69 x 8.70 inches)
Weight	2.80 kg (6.17 lb) without brackets; 2.89 kg (6.37 lb) with brackets
Networking Interfaces	16 x 10/100/1000 Mbps RJ45 ports; 2 x 1 Gbps SFP ports
Management Interface	Ethernet in-band; serial console out-of-band (RJ45)
Total Non-Blocking Line Rate	18 Gbps
Max. Power Consumption	150W
Power Method	100-240VAC/50-60 Hz, universal input; internal AC/DC power supply
PoE Output (RJ45 Ports)	PoE+ IEEE 802.3af/at (pins 1,2+; 3,6-); max 34.2W per port
PoE Voltage Range (802.3at Mode)	50-57V
LEDs per Port	RJ45: PoE (amber), Speed/Link/Activity (amber/green); SFP: Speed/Link/Activity (green)
System LED	White (factory defaults), flashing white (initializing), blue (adopted), flashing blue (locate)
Reset Button	Press and release to restart; press and hold >5 seconds to factory reset
Operating Temperature	-5 to 40°C (23 to 104°F)
Operating Humidity	5 to 95% noncondensing
Mounting	Rack-mountable (1U), wall-mountable, or desktop placement
Certifications	CE, FCC, IC
Software Requirements	UniFi Controller v5.4.x or above; Java Runtime Environment 1.6+ (1.8+ recommended)
Package Contents	Switch, power cord, rack-mount brackets (2), bracket screws (8), mounting screws (4), cage nuts (4), rubber feet (4), quick start guide
Warranty	1 year limited warranty from date of shipment

Frequently Asked Questions - US-16-150W Ubiquiti Networks

How do I reset the Ubiquiti US-16-150W to factory defaults?

Press and hold the Reset button on the front panel for more than five seconds. The system will restore to factory default settings and restart.
Alternatively, you can use the UniFi Controller software to perform a factory reset.

How do I adopt the US-16-150W into my UniFi network?

Ensure the switch is connected to the same Layer 2 network as the UniFi Controller. Open the UniFi Controller software, go to the Devices tab, locate the switch under the Model column, and click Adopt. The system LED will turn blue once adopted.

What type of PoE does the US-16-150W support?

The RJ45 ports support PoE+ (IEEE 802.3af/at) with a maximum power output of 34.2W per port. The PoE voltage range in 802.3at mode is 50-57V.

Can I disable PoE on specific ports?

Yes. In the UniFi Controller, go to Devices, click the switch's name, then the Ports tab. Click Actions for the desired port and select Off or PoE+ as needed, then click Apply.

What cabling is required for the US-16-150W?

For indoor use, use Category 5 (or above) UTP cabling. For outdoor use, shielded Category 5 (or above) cabling must be used and grounded through the AC ground of the power supply. All Ethernet cable runs must use CAT5 or higher.

How do I mount the US-16-150W in a rack?

Attach the included rack-mount brackets to the switch using the provided bracket screws. Then secure the switch to the rack using the mounting screws and cage nuts if needed. The switch occupies 1U of rack space.

What does the front panel System LED indicate?

White: Factory defaults, waiting for adoption. Flashing white: Initializing. Alternating white/blue: Device is busy (e.g., firmware upgrade). Blue: Successfully adopted and working. Flashing blue: Locate mode activated in the controller.

What is the maximum power consumption of the US-16-150W?

The maximum power consumption is 150W. The switch uses an internal AC/DC power supply with universal input (100-240VAC, 50-60 Hz).

How do I use the SFP ports on the US-16-150W?

Remove the protective plug from the SFP port. Insert a compatible fiber SFP module (1 Gbps). Connect the fiber optic cable to the module and the other end to another fiber device. Compatible modules are listed on the Ubiquiti community website.

What software is required to manage the US-16-150W?

You need the UniFi Controller software version 5.4.x or above, available at downloads.ubnt.com/unifi. A management station running Linux, Mac OS X, or Windows 7/8/10 with Java Runtime Environment 1.6+ (1.8+ recommended) and Google Chrome browser is required.

USER MANUAL US-16-150W Ubiquiti Networks

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi® Switch. This Quick Start Guide is designed to guide you through the installation and also includes the warranty terms.

Package Contents

UniFi Switch US-16-150W

Power Cord Rack-Mount Brackets (Qty. 2)

Bracket Screws (Qty. 8)

Mounting Screws (Qty. 4)

Cage Nuts (Qty. 4)

Rubber Feet (Qty. 4)

Quick Start Guide

IMPORTANT: We strongly recommend using UPS backup and power regulation to prevent equipment damage due to stability issues with local AC power.

TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection (DFS) requirements.

System Requirements

• Linux, Mac OS X, or Microsoft Windows 7/8/10
- Java Runtime Environment 1.6 (1.8 or newer recommended)
- Web Browser: Google Chrome (Other browsers may have limited functionality.)
- UniFi Controller software v5.4.x or above, available at: downloads.ubnt.com/unifi

Installation Requirements

• Phillips screwdriver (for rack-mounting)
- Standard-sized, 19" wide rack with a minimum of 1U height available (for rack-mounting)
- For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.
- For outdoor applications, shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the power supply.

We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit www.ubnt.com/toughcable

WARNING: To reduce the risk of fire or electric shock, do not expose the switch to rain or moisture.

Note: Although the cabling can be located outdoors, the UniFi Switch itself should be housed inside a protective enclosure.

Network Topology Requirements

• A DHCP-enabled network for the UniFi Switch to obtain an IP address (connected devices will also obtain IP addresses after deployment)
• A UniFi Cloud Key or management station running the UniFi Controller software v5.4.x or above, located either on-site and connected to the same Layer 2 network, or off-site in a cloud or NOC

Sample Network Diagram

All UniFi devices support off-site management controllers.

For setup details, refer to the User Guide on the website:

documentation.ubnt.com/unifi

Hardware Overview

Front Panel

Port Description
RJ45 1-16	RJ45 ports support Power over Ethernet (PoE) and 10/100/1000 Ethernet connections.
SFP 1-2	Hot-swappable SFP ports support 1 Gbps connections.
Reset Button	This button serves two functions for the UniFi Switch: · Restart Press and release the Reset button quickly. · Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

Front Panel System LED

State Status
White Factory defaults, waiting for integration.
Flashing White Initializing.
Alternating White/Blue	Device is busy; do not use or unplug it. This usually indicates that a process such as a firmware upgrade is taking place.
Blue	Successfully integrated into a network and working properly.
Flashing Blue	This is used to locate a device.When you clickLocatein the UniFi Controller software, the System LED will flash blue. The software will also display the location of the UniFi Switch on the map.

Front Panel Port LEDs

SFP Speed/Link/ActRJ45 Speed.

LED State Status

RJ45 1-16	PoE	Off No PoE
		Amber IEEE 802.3af/802.3at
	Speed/Link/Activity	Off No Link
		Amber	Link Established at 10/100 Mbps Flashing Indicates Activity
		Green	Link Established at 1000 Mbps (1 Gbps) Flashing Indicates Activity
SFP 1-2	Speed/Link/Activity	Off No Link
		Green	Link Established at 1 Gbps Flashing Indicates Activity

Back Panel

Port Description

Console

RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-DB9, serial console cable, also known as a rollover cable, to connect the Console port to your computer. Then configure the following settings as needed:·Baud rate 115200·Data bits 8·Parity NONE·Stop bits 1·Flow control NONE

Hardware Installation

The UniFi Switch can be placed on a horizontal surface, mounted in a rack, or mounted on a wall.

WARNING: FAILURE TO PROVIDE PROPER VENTILATION MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF CLEARANCE NEXT TO THE VENTILATION HOLES FOR ADEQUATE AIRFLOW.

Mounting in a Rack (Optional)

1. Attach the Rack-Mount Brackets to the UniFi Switch using the eight Bracket Screws.

1. Attach the UniFi Switch to the rack using the four Mounting Screws. (If the rack has square slots, use the Cage Nuts with the Mounting Screws.)

Connecting Power

1. Connect the Power Cord to the Power port of the UniFi Switch.

1. Connect the other end of the Power Cord to a power outlet.

Connecting Ethernet

1. Connect a UniFi Cloud Key, management computer, or LAN running the UniFi Controller to the UniFi Switch.

1. Connect Ethernet cables from the gateway or router (DHCP server) and other devices to the UniFi Switch.

Using SFP Ports

To use an SFP port:

1. Remove the protective plug covering the SFP port.

2. Plug a compatible fiber module into the SFP port.

1. Connect the fiber optic cable to the fiber module. Then connect the other end of the cable to another fiber device.

For information about compatible fiber SFP modules, visit: community.ubnt.com/unifi

Software Installation

Download and install the latest version of the UniFi Controller software at downloads.ubnt.com/unifi and follow the on-screen instructions.

Note: If you already have UniFi Controller v5.4.x or newer installed, skip to the section, Adopting the UniFi Switch.

After you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface. Enter the admin name and password that you created and click Log In.

You can manage your network and view network statistics using the UniFi Controller management interface.

To adopt the UniFi Switch, proceed to the Adopting the UniFi Switch section.

For information on configuring and using the UniFi Controller software, refer to the User Guide on the website: documentation.ubnt.com/unifi

Adopting the UniFi Switch

1. From the UniFi Controller dashboard, click Devices in the left menu bar.

1. On the Devices screen, locate the UniFi Switch in the list of devices under the Model column. To adopt the UniFi Switch, click Adopt.

序号	名称	名称	类型	名称	金额(元)	时间	时间
1	ATM-000002	13548.11	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	20 Jan 4	12:00 PM
2	NVR-000001	13548.12(2)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	20 Jan 4th 30	12:00 PM
3	Senshara 0-PR-00001	13548.12(3)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
4	Senshara 0-PR-00002	13548.12(4)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
5	Senshara 0-PR-00003	13548.12(5)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
6	Senshara 0-PR-00004	13548.12(6)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
7	Senshara 0-PR-00005	13548.12(7)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
8	Senshara 0-PR-00006	13548.12(8)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
9	Senshara 0-PR-00007	13548.12(9)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
10	Senshara 0-PR-00008	13548.12(1)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
11	Senshara 0-PR-00009	13548.12(1)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
12	Senshara 0-PR-00010	13548.12(1)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
13	Senshara 0-PR-00011	13548.12(1)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
14	Senshara 0-PR-00012	13548.12(1)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
15	Senshara 0-PR-00013	13548.12(1)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
16	Senshara 0-PR-00014	13548.12(1)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
17	Senshara 0-PR-00015	13548.12(1)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
18	Senshara 0-PR-00016	13548.12(1)	Commercial	Layi Sisana, LRFU, LRFU	2,649,8627	4/25 Dec 23	12:00 PM
19

1. The System LED on the UniFi Switch will turn blue to confirm that it has been successfully adopted.

Configuring PoE Settings

The RJ45 ports are auto-sensing by default, so 802.3af/at devices can be plugged in and automatically receive Power over Ethernet. To disable or enable PoE, follow these instructions:

1. On the Devices screen, locate the UniFi Switch in the list of devices under the Model column. Click its Name/MAC Address to access its settings.

1. Click the Ports tab.

1. Click Actions for the port you want to configure.

1. Select the appropriate PoE setting: Off or PoE+. Then click Apply.

For more information, refer to the User Guide on the website: documentation.ubnt.com/unifi

Specifications

UniFi Switch US-16-150W
Dimensions 443 x 43 x 221 mm (17.44 x 1.69 x 8.70")
Weight	2.80 kg (6.17 lb)
With Mount Brackets	2.89 kg (6.37 lb)
Total Non-Blocking Line Rate 18 Gbps
Max. Power Consumption 150W
Power Method 100-240VAC/50-60 Hz, Universal Input
Power Supply AC/DC, Internal, 150W DC
Rack-Mount Yes, 1U High
LEDs Per Port
RJ45 Data Ports	PoE, Speed/Link/Activity
SFP Data Ports	Speed/Link/Activity
Interfaces
Networking Interfaces	(16) 10/100/1000 Mbps RJ45 Ports
	(2) 1 Gbps SFP Ports
Management Interface	Ethernet In-Band, Serial Console Out-of-Band (Reserved for Future Use)
PoE Output (RJ45 Ports) PoE+ IEEE 802.3af/at (pins 1, 2+; 3, 6-)
PoE Voltage Range 802.3at Mode	50-57V
Max. PoE+ Wattage per Port 34.2W
Operating Temperature -5 to 40°C (23 to 104°F)
Operating Humidity 5 to 95% Noncondensing
Shock and Vibration ETSI300-019-1.4 Standard
Certifications CE, FCC, IC

Safety Notices

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.

WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow.

WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

WARNING: Do not use this product in location that can be submerged by water.

WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer's label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
3. This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.

a. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
b. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.
c. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment.
d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national wiring rules and regulations.

Limited Warranty

UBIQUITI NETWORKS, Inc ("UBIQUITI NETWORKS") warrants that the product(s) furnished hereunder (the "Product(s)") shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS' sole and exclusive obligation and liability under the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion, to repair or replace any Product that fails to conform to the above warranty during the above warranty period. The expense of removal and reinstallation of any Product is not included in this warranty. The warranty period of any repaired or replaced Product shall not extend beyond its original term.

Warranty Conditions

The above warranty does not apply if the Product:

(IV) has been modified and/or altered, or an addition made thereto, except by Ubiquiti Networks, or Ubiquiti Networks' authorized representatives, or as approved by Ubiquiti Networks in writing;
(V) has been painted, rebranded or physically modified in any way;
(VI) has been damaged due to errors or defects in cabling;
(VII) has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical stress, including lightning strikes, or accident;
(VIII) has been damaged or impaired as a result of using third party firmware;
(IX) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or
(X) has not been received by Ubiquiti within 30 days of issuance of the RMA.

In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation; all Ethernet cabling runs use CAT5 (or above), and for outdoor installations, shielded Ethernet cabling is used, and for indoor installations, indoor cabling requirements are followed.

Returns

No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS' facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal. Information on the RMA process and obtaining an RMA number can be found at: www.ubnt.com/support/warranty.

Disclaimer

EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS CONTROL BUYER'S EQUIPMENT OR THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant that the operation of the Products will be error-free or that operation will be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance, including coverage, buyer's selection of products (including the Products) for buyer's application and/or failure of products (including the Products) to meet government or regulatory requirements.

Limitation of Liability

EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Note

Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you. EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to any transactions regarding the sale of the Products.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Industry Canada

CAN ICES-3(A)/NMB-3(A)

This Class A digital apparatus complies with Canadian CAN ICES-3(A).

CAN ICES-3(A)/NMB-3(A)

Australia and New Zealand

Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

CE Marking

CE marking on this product represents the product is in compliance with all directives that are applicable to it.

RoHS/WEEE Compliance Statement

English

European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.

Deutsch

Declaration of Conformity

Česky [Czech]	UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI NETWORKS zařízení, je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnic 2014/30/EU, 2014/35/EU.
Dansk [Danish]	Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI NETWORKS enhed, er i overensstemmelse med de væsentlige krav og øvrige relevante krav i direktiver 2014/30/EU, 2014/35/EU.
Nederlands [Dutch]	Hierbij verklaart UBIQUITI NETWORKS, dat deze UBIQUITI NETWORKS apparaat, in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijnen 2014/30/EU, 2014/35/EU.
English	Hereby, UBIQUITI NETWORKS, declares that this UBIQUITI NETWORKS device, is in compliance with the essential requirements and other relevant provisions of Directives 2014/30/EU, 2014/35/EU.
Eesti [Estonian]	Käesolevaga UBIQUITI NETWORKS kinnitab, et antud UBIQUITI NETWORKS seade, on vastavus olulistele nõuetele ja teistele asjakohastele sätetele direktiivide 2014/30/EL, 2014/35/EL.
Suomi [Finnish]	Täten UBIQUITI NETWORKS vakuuttaa, että tämä UBIQUITI NETWORKS laite, on yhdenmukainen olennaisten vaatimusten ja muiden sitä koskevien direktiivien 2014/30/EU, 2014/35/EU.
Français [French]	Par la présente UBIQUITI NETWORKS déclare que l’appareil UBIQUITI NETWORKS, est conforme aux exigences essentielles et aux autres dispositions pertinentes des directives 2014/30/UE, 2014/35/UE.
Deutsch [German]	Hiermit erklärt UBIQUITI NETWORKS, dass sich dieses UBIQUITI NETWORKS Gerät, in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinien 2014/30/EU, 2014/35/EU befindet.
Ελληνική [Greek]	Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η συσκευή UBIQUITI NETWORKS, είναι σε συμμόρφωση με τις βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις των οδηγιών 2014/30/EE, 2014/35/EE.
Magyar [Hungarian]	Ezennel UBIQUITI NETWORKS kijelenti, hogy ez a UBIQUITI NETWORKS készülék megfelel az alapvető követelményeknek és más vonatkozó 2014/30/EU, 2014/35/EU irányelvek rendelkezéseit.
Íslenska [Icelandic]	Hér, UBIQUITI NETWORKS, því yfir að þetta UBIQUITI NETWORKS tæki er í samræmi við grunnkröfur og önnur viðeigandi ákvæði tilskipana 2014/30/ESB, 2014/35/ESB.
Italiano [Italian]	Con la presente, UBIQUITI NETWORKS, dichiara che questo dispositivo UBIQUITI NETWORKS, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti delle direttive 2014/30/UE, 2014/35/UE.
Latviski [Latvian]	Ar šo, UBIQUITI NETWORKS, deklarē, ka UBIQUITI NETWORKS ierīce, ir saskaņā ar būtiskajām prasībām un citiem attiecīgiem noteikumiem Direktīvās 2014/30/ES, 2014/35/ES.
Lietuviškai[Lithuanian]	UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS jrenginys atitinka esminius reikalavimus ir kitas 2014/30/ES, 2014/35/ES Direktyvų nuostatas.
Malti[Maltese]	Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz UBIQUITI NETWORKS huwa konformi mar-rekwiziti essenzjali u dispożizzjonijiet rilevanti oħrajn ta ‘Direttivi 2014/30/UE, 2014/35/UE.
Norsk[Norwegian]	Herved UBIQUITI NETWORKS, erklærer at denne UBIQUITI NETWORKS enheten, er i samsvar med de grunnleggende kravene og andre relevante bestemmelser i direktivene 2014/30/EU, 2014/35/EU.
Polski[Polish]	Niniejszym, Ubiquiti Networks, oświadcza, że urządzenie UBIQUITI NETWORKS, jest zgodny z zasadniczymi wymaganiami oraz pozostałymi stosownymi postanowieniami Dyrektyw 2014/30/UE, 2014/35/UE.
Português[Portuguese]	UBIQUITI NETWORKS declara que este dispositivo UBIQUITI NETWORKS, está conforme com os requisitos essenciais e outras disposições das Directivas 2014/30/UE, 2014/35/UE.
Română[Romanian]	Prin prezenta, UBIQUITI NETWORKS declară că acest dispozitiv UBIQUITI NETWORKS este în conformitate cu cerințele esențiale și alte prevederi relevante ale Directivelor 2014/30/UE, 2014/35/UE.
Slovensky[Slovak]	Týmto UBIQUITI NETWORKS, prehlasuje, že toto UBIQUITI NETWORKS zariadenie, je v súlade so základnými požiadavkami a d’alšími relevantnými ustanoveniami smernice 2014/30/EÚ, 2014/35/EÚ.
Español[Spanish]	Por medio de la presente UBIQUITI NETWORKS declara que este dispositivo UBIQUITI NETWORKS, cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de las Directivas 2014/30/UE, 2014/35/UE.
Svenska[Swedish]	Härmed UBIQUITI NETWORKS, intygar att denna UBIQUITI NETWORKS enhet är i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiven 2014/30/EU, 2014/35/EU.

Online Resources

Support help.ubnt.com

Community community.ubnt.com

Downloads downloads.ubnt.com

www.ubnt.com