KF14455 - Paper Shredder Q-Connect - Free user manual and instructions

Product Type	Paper Shredder
Brand	Q-Connect
Model	KF14455
Shred Type	Cross-Cut
Shred Size	4 x 40 mm
Sheet Capacity	8-10 sheets (70 gsm)
Bin Volume	15 liters
Dimensions (W x D x H)	31 x 18 x 43 cm
Weight	3.5 kg
Power Supply	220-240 V, 50 Hz
Power Consumption	150 W
Operating Mode	Manual Forward / Reverse
Security Level	P-3 (DIN 66399)
Safety Features	Overheat cut-out, Auto start/stop
Can Shred	Paper, staples, credit cards
Maintenance	Empty bin regularly, oil blades monthly
Cleaning	Use dry cloth; avoid liquids
Spare Parts	Shredder blade set, motor unit available
Reparability	Serviceable by authorized technician
Warranty	2 years (refer to manual)

Frequently Asked Questions - KF14455 Q-Connect

What type of shred is the KF14455?

The KF14455 is a cross-cut shredder, providing increased security by cutting paper into small confetti-like pieces.

How many sheets can it shred at once?

It can shred up to 8-10 sheets of 70 gsm paper at a time. For best results, do not exceed this capacity.

Can it shred credit cards?

Yes, it can shred credit cards and small staples, but avoid shredding continuous forms or thick materials.

What is the bin capacity?

The bin has a 15-liter capacity and should be emptied regularly to prevent jams.

Why does the shredder stop during use?

The shredder has an overheat protection feature. If it stops, let it cool down for about 30 minutes before restarting.

How do I oil the shredder blades?

Apply shredder oil across the paper entry and run the shredder in reverse for a few seconds. Repeat monthly or after every 30 minutes of continuous use.

What should I do if paper jams?

Use the reverse function to clear the jam. If that fails, unplug the unit and gently remove paper from the entry slot.

Is it safe for children?

The shredder should be kept away from children. It has automatic start/stop, but supervision is recommended.

What maintenance is required?

Empty the bin regularly and oil the blades monthly. Never use lubricants other than shredder oil.

How can I get spare parts?

Contact Q-Connect support or visit their website for authorized spare parts. Only use genuine components.

USER MANUAL KF14455 Q-Connect

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Product name SHREDDER OIL 150ml

Product number KF14455,ZP

Internal identification ASHO150QCA/B

1.2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses Lubricant.

Uses advised against At this moment in time we do not have information on use restrictions. They will be included in this safety data sheet when available

1.3. Details of the supplier of the safety data sheet

Supplier INTERACTION

Jean-Baptiste de Ghellincklaan 23, box 101

9051 Gent, BELGIUM

[phone]

[phone]

[e-mail]

1.4. Emergency telephone number

Emergency telephone + 32 93 80 82 48

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification

EC No 1272/2008 H222, H229

Physical hazards Aerosol 1 - H222, H229

Health hazards Not Classified

Environmental hazards Not Classified

Classification (67/548/EEC or F+;R12.

1999/45/EC)

2.2. Label elements

Pictogram

Signal word Danger

Hazard statements H222 Extremely flammable aerosol.

H229 Pressurised container: may burst if heated

SHREDDER OIL 150ml

Precautionary statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F .P102 Keep out of reach of children.

2.3. Other hazards

Contact with liquid may cause cold burns / frostbite.

SECTION 3: Composition/information on ingredients
3.2. Mixtures

PROPANE 5-10%
CAS number: 74-98-6 EC number: 200-827-9 REACH registration number: 01-2119486944-21-XXXX
Classification	Classification (67/548/EEC or 1999/45/EC)
Flam. Gas 1 - H220	F+;R12
Press. Gas

BUTANE 1-5%
CAS number: 106-97-8 EC number: 203-448-7 REACH registration number: 01-2119474691-32-XXXX
Classification	Classification (67/548/EEC or 1999/45/EC)
Flam. Gas 1 - H220	F+;R12
Press. Gas

ISOBUTANE 1-5%
CAS number: 75-28-5 EC number: 200-857-2 REACH registration number: 01-2119485395-27-XXXX
Classification	Classification (67/548/EEC or 1999/45/EC)
Flam. Gas 1 - H220	F+;R12
Press. Gas

The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.

Composition comments No classified ingredients, or those having occupational exposure limits, present above the levels of disclosure.

SECTION 4: First aid measures
4.1. Description of first aid measures

Inhalation	Move affected person to fresh air at once. Keep affected person warm and at rest. Get medical attention immediately.
Ingestion Do not induce vomiting. Rinse mouth thoroughly with water.
Skin contact	Wash skin thoroughly with soap and water. Get medical attention if any discomfort continues. If tissues are frozen, do not remove clothes but rinse with plenty of lukewarm water. Get medical attention.

SHREDDER OIL 150ml

Eye contact

Remove any contact lenses and open eyelids wide apart. Rinse immediately with plenty of water. Continue to rinse for at least 15 minutes and get medical attention.

4.2. Most important symptoms and effects, both acute and delayed
4.3. Indication of any immediate medical attention and special treatment needed

Notes for the doctor Treat symptomatically.

SECTION 5: Firefighting measures

5.1. Extinguishing media

Suitable extinguishing media The product is not flammable. Use fire-extinguishing media suitable for the surrounding fire.

5.2. Special hazards arising from the substance or mixture

Specific hazards Containers can burst violently or explode when heated, due to excessive pressure build-up. Containers can burst violently or explode when heated, due to excessive pressure build-up. Hazardous combustion products Oxides of carbon. Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours.

5.3. Advice for firefighters

Protective actions during firefighting Move containers from fire area if it can be done without risk. Special protective equipment for firefighters Wear positive-pressure self-contained breathing apparatus (clothing.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Personal precautions Wear protective clothing as described in Section 8 of this safety data sheet.

6.2. Environmental precautions

Environmental precautions Do not discharge into drains or watercourses or onto the ground.

6.3. Methods and material for containment and cleaning up

Methods for cleaning up Absorb in vermiculite, dry sand or earth and place into containers.

6.4. Reference to other sections

Reference to other sections Wear protective clothing as described in Section 8 of this safety data sheet. See Section 11 for additional information on health hazards. For waste disposal, see Section 13.

SECTION 7: Handling and storage

7.1. Precautions for safe handling

Usage precautions Provide adequate ventilation. Avoid inhalation of vapours. Use approved respirator if air contamination is above an acceptable level.

7.2. Conditions for safe storage, including any incompatibilities

Storage precautions Store at moderate temperatures in dry, well ventilated area.

7.3. Specific end use(s)

Specific end use(s) The identified uses for this product are detailed in Section 1.2.

SECTION 8: Exposure Controls/personal protection

8.1. Control parameters

Occupational exposure limits

SHREDDER OIL 150ml

BUTANE

Long-term exposure limit (8-hour TWA): WEL 600 ppm 1450 mg/m ³

Short-term exposure limit (15-minute): WEL 750 ppm 1810 mg/m ³

WEL = Workplace Exposure Limit

8.2. Exposure controls

Appropriate engineering controls	No specific ventilation requirements.
Eye/face protection	Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. Unless the assessment indicates a higher degree of protection is required, the following protection should be worn: Tight-fitting safety glasses. Personal protective equipment for eye and face protection should comply with European Standard EN166.
Hand protection	Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible. The most suitable glove should be chosen in consultation with the glove supplier/manufacturer, who can provide information about the breakthrough time of the glove material. It is recommended that gloves are made of the following material: Nitrile rubber. To protect hands from chemicals, gloves should comply with European Standard EN374.
Other skin and body protection	Wear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged vapour contact.
Hygiene measures	Use engineering controls to reduce air contamination to permissible exposure level. Provide eyewash station. Wash hands at the end of each work shift and before eating, smoking and using the toilet. Use appropriate skin cream to prevent drying of skin. When using do not eat, drink or smoke. Do not smoke in work area.
Respiratory protection	If ventilation is inadequate, suitable respiratory protection must be worn. Wear a respirator fitted with the following cartridge: Combination filter, type A2/P3. Gas and combination filter cartridges should comply with European Standard EN14387.

SECTION 9: Physical and Chemical Properties

9.1. Information on basic physical and chemical properties

Appearance Aerosol. Liquid.

Colour Colourless.

Odour Characteristic.

Initial boiling point and range -26.5°C @

Vapour pressure 62.8 kPa @ °C

Relative density 1.176 (liquid) @ @ 20°C

Solubility(ies) Insoluble in water.

Auto-ignition temperature > 750°C

9.2. Other information

SECTION 10: Stability and reactivity

10.1. Reactivity

Reactivity There are no known reactivity hazards associated with this product.

10.2. Chemical stability

SHREDDER OIL 150ml

Stability Stable at normal ambient temperatures and when used as recommended.

10.3. Possibility of hazardous reactions

Possibility of hazardous reactions

Not determined. Will not polymerise.

10.4. Conditions to avoid

Conditions to avoid

Avoid heat, flames and other sources of ignition. Avoid contact with acids and alkalis.

10.5. Incompatible materials

Materials to avoid Strong oxidising agents.

10.6. Hazardous decomposition products

Hazardous decomposition products

Thermal decomposition or combustion products may include the following substances: Carbon monoxide (CO). Carbon dioxide (CO2).

SECTION 11: Toxicological information

11.1. Information on toxicological effects

Other health effects There is no evidence that the product can cause cancer.

General information No specific health hazards known.

Inhalation

Gas or vapour in high concentrations may irritate the respiratory system. Symptoms following overexposure may include the following: Headache. Fatigue. Nausea, vomiting.

SECTION 12: Ecological Information

Ecotoxicity Not regarded as dangerous for the environment.

12.1. Toxicity

Acute toxicity - fish No information required.

Acute toxicity - aquatic invertebrates

No information required.

Acute toxicity - aquatic plants No information required.

Acute toxicity - microorganisms

No information required.

12.2. Persistence and degradability

Persistence and degradability There are no data on the degradability of this product.

12.3. Bioaccumulative potential

Bioaccumulative potential No data available on bioaccumulation.

12.4. Mobility in soil

12.5. Results of PBT and vPvB assessment

Results of PBT and vPvB assessment

This product does not contain any substances classified as PBT or vPvB.

12.6. Other adverse effects

Other adverse effects

The product contains volatile organic compounds (VOCs) which have a photochemical ozone creation potential.

SHREDDER OIL 150ml

SECTION 13: Disposal considerations

13.1. Waste treatment methods

General information	Waste is classified as hazardous waste. Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.
Disposal methods	Empty containers must not be punctured or incinerated because of the risk of an explosion. Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.

SECTION 14: Transport information

General As supplied, this product is consigned under the Limited Quantities provisions.

14.1. UN number

UN No. (ADR/RID) 1950

UN No. (IMDG) 1950

UN No. (ICAO) 1950

14.2. UN proper shipping name

Proper shipping name AEROSOLS (ADR/RID)

Proper shipping name AEROSOLS (IMDG)

Proper shipping name (ICAO) AEROSOLS

Proper shipping name (ADN) AEROSOLS

14.3. Transport hazard class(es)

ADR/RID class 2.1

ADR/RID label 2.1

IMDG class 2.1

ICAO class/division 2.1

Transport labels

14.4. Packing group

Not applicable.

14.5. Environmental hazards

Environmentally hazardous substance/marine pollutant No.

14.6. Special precautions for user

EmS F-D, S-U

Tunnel restriction code (D)

14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code

SHREDDER OIL 150ml

Transport in bulk according to No information required.

Annex II of MARPOL 73/78

and the IBC Code

SECTION 15: Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture

National regulations

The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (SI 2009 No. 716).The Control of Substances Hazardous to Health Regulations 2002 (SI 2002 No. 2677) (as amended).The Aerosol Dispensers Regulations 2009 (SI 2009 No. 2824).

EU legislation

Commission Directive 2000/39/EC of 8 June 2000 establishing a first list of indicative occupational exposure limit values in implementation of Council Directive 98/24/EC on the protection of the health and safety of workers from the risks related to chemical agents at work (as amended).Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) (as amended).Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures (as amended).Commission Decision 2000/532/EC as amended by Decision 2001/118/EC establishing a list of wastes and hazardous waste pursuant to Council Directive 75/442/EEC on waste and Directive 91/689/EEC on hazardous waste with amendments.

Guidance Workplace Exposure Limits EH40.

Authorisations (Title VII No specific authorisations are known for this product.

Regulation 1907/2006)

Restrictions (Title VIII No specific restrictions on use are known for this product.

Regulation 1907/2006)

15.2. Chemical safety assessment

No chemical safety assessment has been carried out.

SECTION 16: Other information

Issued by Toni Ashford

Revision date 18/11/2015

Revision 4

SDS number 13542

Risk phrases in full R12 Extremely flammable.

Hazard statements in full H220 Extremely flammable gas.

H222 Extremely flammable aerosol.

H229 Pressurised container: may burst if heated

This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate and reliable as of the date indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.