VN720 VW-U1 - Gps ESX - Free user manual and instructions

Product type	GPS Navigation System
Brand	ESX
Model	VN720 VW-U1
Dimensions (L x W x H)	150 x 90 x 20 mm
Weight	200 g
Display size	7 inches
Display resolution	800 x 480 pixels
Touchscreen	Yes, resistive
Battery type	Lithium-ion rechargeable
Battery capacity	1000 mAh
Operating time	Up to 2 hours
Charging input	5V/2A via USB
Navigation maps	Preloaded (Europe region)
Map updates	Free lifetime via PC tool
Connectivity	Bluetooth, USB 2.0
GPS chipset	MediaTek MTK
Audio	Built-in speaker, 3.5mm jack
Memory expansion	MicroSD card up to 32 GB
Languages supported	Multiple (including English, French, German, etc.)
Key functions	Turn-by-turn navigation, Points of interest, Lane guidance, Speed camera alerts
Maintenance	Clean with a soft, dry cloth; avoid liquids
Safety	Do not expose to direct sunlight or disassemble
Spare parts availability	Not available; device is not user-serviceable

Frequently Asked Questions - VN720 VW-U1 ESX

How do I update the maps on my ESX VN720 VW-U1?

Connect the GPS to your computer via USB. Download and install the official map update tool from the ESX website. Follow the on-screen instructions to update your maps. Ensure you have a stable internet connection.

How can I charge the GPS?

Use the included USB cable and connect it to a 5V/2A USB charger (e.g., car charger or wall adapter). The device will charge while powered on or off. A full charge takes approximately 2-3 hours.

Can I use the GPS while driving?

For safety, do not operate the device while driving. Set your destination before starting the engine. The GPS will provide voice-guided directions so you can keep your eyes on the road.

How do I set my home address?

From the main menu, go to 'Settings' > 'Navigation' > 'Favorites' or 'Home'. Enter your home address or select it from recent destinations. Save it for quick access.

How to adjust the volume?

During navigation, use the on-screen volume slider or the physical buttons (if available). You can also adjust voice guidance volume in 'Settings' > 'Sound'.

My GPS won't turn on. What should I do?

First, check if the battery is charged. Connect it to a charger and wait for 10 minutes, then try turning it on. If still off, perform a reset by pressing the reset button (use a paperclip) or holding the power button for 10 seconds.

How do I reset the GPS to factory settings?

Go to 'Settings' > 'System' > 'Reset' or 'Factory Reset'. Confirm the action. This will erase all personal data and restore default settings. Alternatively, use a paperclip to press the reset hole on the device.

Can I transfer maps to an SD card?

Yes. Insert a MicroSD card (up to 32 GB) into the slot. In the map update tool, choose the SD card as the destination. The GPS will automatically detect the maps from the card.

Is a mount included with the device?

Yes, the package includes a windshield suction cup mount and a car charger. Mount the device securely on the windshield or dashboard using the provided adhesive disc.

How to improve GPS signal reception?

Ensure the device has a clear view of the sky. Avoid metal coatings on the windshield or parking in covered areas. If signal is weak, check if the GPS antenna is unobstructed and try restarting the device.

USER MANUAL VN720 VW-U1 ESX

V1.0 NAVIGATION QUICK START GUIDE ENGLISH

Abstract logo design featuring a stylized 'S' with a yellow checkmark and registered trademark symbol (no text or numbers present)

CAR MEDIA SYSTEMS

Map updates naviextras.com

Getting started

When using the navigation software for the first time, an initial setup process starts automatically. Do as follows:

Select the program language. If your preferred language does not appear on the screen, tap / or drag the list up or down with your finger to view all available languages.

Tap English (UK) to select your preferred language. Tap to confirm your selection, and proceed to the next page.

Read the Software and Database End Use ✓ Accept if you agree with the terms of use.

You are now asked whether you allow the software to collect usage information and GPS logs that may be used for improving the application and the quality and coverage of maps.

Tap Yes to allow the anonymous statistics or disable this function.

Select the voice guidance language profile. If your preferred language does not appear on the screen, scroll the list for other available profiles. Tap any item in the list for a short voice

sample. Tap √ Next to confirm your selection, and proceed to the next page.

Getting started

Set your preferred time format and units. Tap to confirm you preferences.

Set your preferred route planning options. Tap to confirm you preferences.

The initial setup is now complete. Tap The application starts.

Startup screen: the Navigation menu

After the initial setup, and whenever the software is started, the Navigation menu appears. You have the following options:

- T a p to select your destination by entering an address or selecting a place of interest, a location on the map or one of your Favourite destinations. You can also look up your recent destinations from the Smart History or by entering its coordinate.

- To a point to display the route parameters. You can view the route in its full length on the map. You can also perform route-related actions such as editing or cancelling your route, setting a start point for the route, picking route alternatives, avoiding parts of the route, simulating navigation or adding the destination to your Favourites.

- T a p ____ to customise the way the navigation software works, simulate demo routes, or to run some additional applications.

- T a p to start navigating on the map.

• T a p to stop navigation and exit the software.

Find menu

In the Navigation menu, tap Find. The Find menu provides you with the following options:

• T a p to specify an address as your destination.
- T a p to select a place of interest as your destination. - T a p to navigate to a location selected on the map.
- T a p to navigate to a location selected on the map.

• T a p to choose from the list of your favourite destinations.

- T a p or to navigate to the recent destination that is shown on the button.

- T a p to choose from the list of all recent destinations.

• T a p More for other search methods.

Navigating to an address

then tap . By default, the screen

In the Navigation menu, tap 📄 and 📃, then tap 📋. By default, the screen proposes the city or town where you are located.

If needed, change the country. Tap the button showing the name of the country.

1. Use the keyboard to enter the name of the country.

2. After entering a couple of characters, the list of countries that match the entered string appears. Tap the country of your choice.

If needed, change the city/town. Tap the button showing the name of the city/town, and be the keyboard to enter a part of its name. As you enter letters, the most likely city/town time is always shown in the input field. You have the following options:

• T a p to select the city/town that is offered in the input field.

• T a p to correct your entry.

• T a p to browse the list of city/town names matching your input.

Select a city/town from the list.

to select the city/town that is offered in the input field.

to correct your entry.

Results

Navigating to an address

Enter the street name:

1. Tap
2. Use the keyboard to enter a part of the street name.

to select the street that is offered in the input field or tap

Results

to browse the list of all streets matching your input. Select a street

from the list.

Enter the house number:

1. Tap

2. Use the keyboard to enter the house number.

3. Tap

to finish entering the address.

The map appears with the selected destination in the middle. Tap another map location if

necessary, then tap

to confirm the destination.

After a short summary of the route parameters, the map appears showing the entire route.

Wait for a few seconds or tap

and start navigating.

Navigating to a place of interest

On the Map screen, tap Menu to return to the Navigation menu. In Navigation menu, tap Find, then tap You are offered the following preset search categories:

- T a p to get a list of petrol stations along the route or if it is not available, around your current position or your last known position.

- T a p At My Destination to get a list of parking lots near the destination or if it is not available, around your current position or your last known position.

- T a p Along Route to get a list of restaurants along the route, around your current position or your last known position.

You can also tap □ Quick Search □ and search for a place by entering its name.

If none of the above is appropriate, tap Custom Search to find a place of interest at the following locations:

- T a_p to search around the current position or if it is not available, around the last know position.

• T a p to search for a place within a selected city or town.

- T a p Destination to search for a place around the destination of the active route.

- T a p Route to search along the active route, and not around a given point. This is useful when you search for a later stopover that results in a minimal detour only, such as searching for upcoming petrol stations or restaurants.

An example of navigating to a place of interest

Example: To find a park around your destination, do as follows (starting from the Navigation menu):

The list of place categories appears. Tap or slide your finger to browse the list, and tap Leisure.

Tap List All Places to browse the whole category, or tap to narrow down your search.

Tap any of the list items.

Check the details and the location of the place, and then tap Next

After a short summary of the route parameters, the map appears showing the entire route. Wait for a few seconds or tap Go! and start navigating.

The Map screen

The Map screen is the most important and frequently used screen of the software. The Vehimarker (a blue arrow by default) represents your current position, and the orange line shows the recommended route. There are screen buttons and data fields on the screen to help you navigate. During navigation, the screen shows route information.

• At the top of the screen, you see your heading and the house numbers on left and right if you have not selected a route destination. When navigating a route, you see the next manoeuvre and the next street/road on your route. Tap either of them to open the route itinerary.
• To open the Quick menu with a selection of functions that are useful during navigation.
• Tap the map anywhere to explore the map around your current position. Additional map control buttons appear.

• T a p 16.9 km to open three data fields on the map. Tap any of them to suppress the others. The default values for navigation (you can change them in Map settings):

• the remaining distance t

• the remaining time of th
• the estimated time of th

- T a p Menu to open the Navigation menu.

'More' menu

The 'More' menu provides you with various options and additional applications. In the

Navigation menu, tap

- Settings : Fine-tune route planning options, change the look of the Map screen, turn on or off warnings, or restart the Configuration wizard, etc.

- Updates and Entries: Visit www.naviextras.com to get additional content, such as new maps or 3D landmarks and useful applications.

- : Access travel applications: the unit converter, the clothing size converter or country information.

• Full Consumption: Access other useful applications: the calculator, the fuel and maintenance monitor, sunrise and sunset information or the trip and track log monitor.

- Run the Demo and watch sample route simulations to see how navigation works, read the Software and Database End User License Agreement, or check the map and other contents of the application.

Settings menu

In the Navigation menu, tap provides you with the following

then tap

Settings menu

- Sound and Warnings: Adjust the different sound volumes, change the voice guidance profile, or enable and set up warnings.

- Change the function buttons in the Quick menu of the Map screen.

- Before selecting one of the Lorry profiles as the Vehicle type used in route calculation, set up the editable lorry attribute profile with the parameters of your lorry. These parameters will be used in route calculation.

- You can adjust traffic related settings such as using preloaded statistical or online traffic, or select whether to take traffic events into consideration when calculating the route.

- Select the type of vehicle you are driving, the road types used in route planning, and the route planning method.

- Adjust map related settings: change the daytime and night colour schemes, change the default zoom level, switch between 2D and 3D map, suppress buildings or change the Vehimarker.

- Adjust how the software helps you navigate with different kinds of route related information on the Map screen.

- Turn the menu animations on or off, select a different skin for the application, or adjust the display backlight.

- Change the program language, the time format, units or the time zone.

- Turn the automatic trip or track log saving on or off, check the current size of the trip database.

• The application collects usage information and GPS logs that may be used for improving the application and the quality and coverage of maps. Here you can enable or disable collecting these logs.

• Modify the basic software parameters set during the initial setup process.

- Delete all saved data and reset all settings to their factory defaults.

Abstract logo design with a stylized 'S' and yellow diagonal stripe (no text or symbols)

CAR MEDIA SYSTEMS