Passport 8500 X50 - Radar detector Escort - Free user manual and instructions

Product Type	Radar and Laser Detector
Brand	Escort
Model	Passport 8500 X50
Dimensions (H x W x L)	1.25 x 2.85 x 5.32 inches
Weight	Approx. 5 oz
Power Requirement	12 VDC, negative ground
Power Cord	SmartCord with mute button and alert light (included)
Display	280-LED alphanumeric, three brightness levels plus Dark mode
Radar Bands Detected	X (10.525 GHz), K (24.150 GHz), Ka (34.700 GHz), POP
Laser Detection	904 nm, multiple sensors for 360° protection
Signal Processing	Digital Signal Processing (DSP) with AutoSensitivity
Sensitivity Modes	Auto (AutoSensitivity), Highway, City (programmable)
Display Modes	Bar graph, ExpertMeter (up to 8 signals), SpecDisplay (numeric frequency)
Customization	EZ-Programming with 9 user-selectable options including bands, tones, brightness
Audio Alerts	Distinct tones per band, AutoMute reduces volume after initial alert
False Alert Filtering	TSR (Traffic Signal Rejection) software, VG2 immunity (SmartShield)
Mounting	Windshield mount with EasyMount bracket (adjustable angle)
Cleaning	Wipe with soft, damp cloth; avoid harsh chemicals or immersion
Safety Note	Mount where it does not obstruct driver's view or become a projectile
Accessories	Direct-wire SmartCord, visor clip, travel case (sold separately)
Warranty	One-year limited warranty; extended service plan available

Frequently Asked Questions - Passport 8500 X50 Escort

How do I turn on the Passport 8500 X50?

Rotate the thumbwheel on the left side away from you to power on and adjust volume. The detector will run a startup sequence and then display the current mode.

What do the different sensitivity modes (Auto, Highway, City) do?

Auto (AutoSensitivity) intelligently adjusts sensitivity to reduce false alarms. Highway provides maximum range. City lowers X-band sensitivity to minimize alerts from door openers and motion sensors. Use the City button to cycle modes.

How do I mute an alert?

Briefly press the Mute button on the front panel or on the SmartCord to silence the current alert. The mute resets automatically after the signal passes.

What is AutoMute and how do I turn it off?

AutoMute automatically reduces audio volume after a few seconds of alert. To turn it off, enter Program Mode (hold City and Dim for 2 seconds), scroll to aMute using the Review button, then press Change to set aMute OFF. Wait 8 seconds to exit.

How do I adjust display brightness or use Dark Mode?

Press the Dim button to cycle through Maximum, Medium, Minimum, and Dark. In Dark Mode, the display shows a dim power-on indication (e.g., AD, HD, CD) and no visual alerts; only audio alerts sound.

How do I reset the detector to factory defaults?

Press and hold the City, Dim, and Mute buttons simultaneously while turning the power on. The display will show 'Reset' and beep.

What is ExpertMeter and how do I enable it?

ExpertMeter displays up to 8 radar signals simultaneously, showing bands and signal strength as vertical lines. Enable it via EZ-Programming: set the Meter option to Meter EXP.

How do I interpret the different audio tones?

X-band = beep tone; K-band = raspy brap; Ka-band = double-brap; POP = solid brap. The rate of alert increases with signal strength, becoming a solid tone for very strong signals.

How do I mount the detector on the windshield?

Insert the EasyMount bracket into the slot on top, press the adjustment button to select one of four positions, then attach the suction cups to a clean windshield. Ensure the top back edge rests against the glass for stability.

What should I do if the detector does not turn on?

Check that the volume thumbwheel is turned on, the vehicle ignition is on, and the lighter socket is clean and functional. Test in another vehicle. If the display shows 'Service', contact Escort for repair.

USER MANUAL Passport 8500 X50 Escort

5440 West Chester Road

West Chester OH 45069

Sales / Service 800.964.3143

www.EscortRadar.com

©2011 ESCORT Inc. Escort®, Passport®, AFR®, SmartShield®, AutoSensitivity®, ExpertMeter™ and SpecDisplay™ are trademarks of ESCORT Inc.

Features, specifications and prices subject to change without notice.

Owner's Manual

RADAR-LASER-DETECTOR

Congratulations Quick Reference Card

You've purchased the PASSPORT 8500 X50, which is the most advanced high-performance radar and laser detector on the market.

The 8500 X50 provides extreme long-range warning on all radar bands including X, K, superwide Ka, and instant-on POP mode. Multiple front and rear laser sensors provide 360 degree laser protection, including the widest field of view. For the ultimate in laser protection, the PASSPORT 8500 X50 is ZR-i ready. Ask your retailer, or call us at 1-800-543-1608 for details.

Our patented Digital Signal Processing (DSP) provides extreme radar range with minimal false alarms. Patented Mute and AutoMute circuits keep the PASSPORT 8500 X50 quiet in even the most populated areas. In addition, the PASSPORT 8500 X50 introduces the following state-of-the-art performance and features:

• Extreme long-range K and Ka-band radar performance, including instant-on POP mode
- Advanced EZ-Programming lets you customize up to 9 features
- Exclusive AutoSensitivity intelligently filters out annoying false alarms, plus Highway and City settings
- Ultra-bright alphanumeric display with 280 LED's

• Exclusive ExpertMeter tracks and displays up to 8 radar signals simultaneously
• Exclusive SpecDisplay provides actual numeric frequency for any radar signal
• Programmable radar bands (on/off) allow you to customize which radar bands are monitored
• Includes exclusive SmartCord for easy access to remote mute button

If you've used a radar detector before, a review of the Quick Reference Guide on pages 4 and 5, and the EZ-Programming information on pages 12 and 13 will briefly explain the new features.

If this is your first detector, please read the manual in detail to get the most out of your PASSPORT's outstanding performance and innovative features.

Please drive safely.

FCC Note:

Modifications not expressly approved by the manufacturer could void the user's FCC granted authority to operate the equipment.

▼ Remove card along perforations ▼

PASSPORT 8500 X50 Quick Reference Card

There are 9 user selectable options so you can customize your PASSPORT 8500 X50 for your own preferences.

The buttons labeled CITY and DIM are also used to enter the Program Mode. REVIEW your current program settings, and to CHANGE any settings as desired. The words PROGRAM, REVIEW, and CHANGE are located on the top of the detector, and are highlighted in blue graphics.

How to use EZ-Programming

1 To enter Program Mode, press and hold both top buttons down for 2 seconds. The unit will beep twice, and will display the word Program.

2 Then press the REVIEW button to review the current settings. You can either tap the button to change from item to item, or hold the button to scroll through the items.

3 Press the CHANGE button to change any setting. You can either tap the button to change from setting to setting, or hold the button to scroll through all the options

4 To leave Program Mode, simply wait 8 seconds without pressing any button. The unit will display Complete, beep 4 times, and return to normal operation.

Factory Default Settings

To reset PASSPORT to its original factory settings, press and hold the "CITY," "DIM," and "MUTE" buttons while turning the power on. PASSPORT's display will provide a Reset message, accompanied by an audible alert, acknowledging the reset

An example

Here is how you would turn PASSPORT's Automobile feature off.

1. Enter the Program Mode by holding both the city and dim buttons down for 2 seconds. PASSPORT will be twice and display Program

2. Then hold the REVIEW button down. PASSPORT will scroll through the category starting with Pilot Light (Pilot), then Power-on sequence (PurOn), then Signal strength meter (SIEver), and then Absolute (ABUe).

3 Release the REVIEW button when PASSPORT shows the AutoMate item. Since the factory setting is for AutoMate to be on, PASSPORT will display Mio To On If you accidentally don't release the Review button in time, and PASSPORT goes to the next category, hold the Review button down again, and after PASSPORT scrolls through all categories, it will begin again at the top of the list.

4 Press the CHANGE button to change from a malte ON to a malte OFF.

1. To complete the Programming, simply wait 8 seconds without pressing any button. PASSPORT will display complete beep 4 times, and return to normal operation.

EZ-Programming Details ▶

Quick Reference Card

▼ Remove card along perforations ▼

PASSPORT 8500 X50 Quick Reference Card

Press the REVIEW button to go from one category to the next
PILOT LIGHT (Power-on indication)	Filot HWY Filot H Filot H>	Press the CHANGE button to change your setting within a category
	Filot H>	"Full word: Highway or Area or Gray Letter II or A or C Letter with scarring the symbol of car so spiled with a matching that scanning symbol Vehicle voltage
	Filot +	"
	Filot +>
	Filot +>
	Filot U
POWER-ON SEQUENCE	Par-On STD	"Standard power source sequence East power on sequence
	Par-In FST
SIGNAL STRENGTH METER	Meter STD	"Standard signal strength meter Export Meter
	Meter EXP	"
	Meter SPC	SpeciDouple
AUTOMITTE	aMule OH	"Autoforce on Anamplitude off
	aMule OFF
AUDIOTONFS	Tone STD	"Standard sound Load tones
	Tone LOUD
CITY MODE SENSITIVITY	City STD	"Standard by mode sensitivity Low X band sensitivity in City Mode No X band sensitivity in City Mode
	City LoX
	City NoX
BRIGHTNESS	Ert LAST	"Last brightness used Minimum brightness when turned on Medium brightness when turned on Maximum brightness when turned on Dark Mode when PASSPOUT turned on
	Ert HDH
	Ert HDK
	Ert DFRX
DARK MODE	DRK STD	"Standard dark shows IHS AND GH All Dark, no display
	DRK ALL
BANDS	Bands DFT	"Factory default settings
	Bands MOD	Factory default settings modified
		"Text bands ON or OFF by preserving the musical buttons
	X OH	or OFF (squosh & on)
	K OH	or OFF (squosh & on)
	Rs OH	or OFF (squosh & on)
	PLR OH	or OFF (squosh & off)
	CLR OH	or OFF (squosh & on)
	ISR OH	or OFF (squosh & on)

2

Table of Contents

Quick Reference Guide 4-5 EZ-Programming 12-16

Installation 6-7		• How to use EZ-Programming	12
• Power Connection 6		• Example of Programming	12
• Mounting Location 6		• Overview of Programming	13
• Windshield Mount 7		• Details of Programming	14-16
Controls and Features 8-11		Technical Details	17-22
• Power and volume control 8		• Specifications	17
• Power-on indication 8		• Interpreting Alerts	18-19
• AutoMute 8		• How Radar Works 20
• Mute 8		• How POP Mode Works	21
• Auto / Highway / City Switch 8		• How TSR Works	21
• Dim / Dark Switch 9		• How Laser Works 22
• Dark Mode 9		Service	23-28
• Audible Alerts	9	• Service	23
• Signal Strength Meter	10	• Troubleshooting	24-25
• ExpertMeter	10-11	• Warranty	26
• SpecDisplay	11	• Accessories	26

3

Quick Reference Guide

To begin using your PASSPORT, just follow these simple steps

1 Plug the small end of the power cord into the side jack of the detector, and plug the large end of the power cord into your car's lighter socket.
2 Mount your PASSPORT on the windshield using the supplied windshield mount.
3 Rotate the volume thumbwheel on PASSPORT's left side to turn PASSPORT on and adjust the volume.

Please read the manual to fully understand PASSPORT's operation and features.

EasyMount Slot

Insert PASSPORT's adjustable Windshield mount into this slot. Page 7

Rear Laser Port

Receives laser signals from behind the vehicle.

EasyMount Button

Press the button, and slide the Windshield Mount into one of its four locking positions. Page 7

City Button

Switches between AutoSensitivity, City, and Highway settings. In general, we recommend the Auto mode. Page 8

Power/Volume Control

Rotate the thumbwheel to turn PASSPORT on and set the volume. Page 8

AutoMute

PASSPORT's patented AutoMute automatically reduces the volume level of the audio alert after a brief period. If you prefer, you can turn AutoMute off. Page 8

Radar Antenna and Laser Lens

The rear panel of your PASSPORT should have Accepts standard 3.5mm mono earphone, a clear view of the road ahead. For best performance, do not mount PASSPORT directly behind windshield wipers or tinted areas. Page 6 Power Jack Plug the SmartCord into this connector.

Alphanumeric Display

PASSPORT's display will show Highway, Auto, or City as its power-on indication. If you prefer, you can choose other power-on indications. Page12-14 During an alert, the display will indicate radar band, and a precise bar graph of signal strength. Page10

NOTE: In the Dark Mode the display will not light during an alert. Page 9

Earphone Jack

Accepts standard 3.5mm mono earphone. Power Jack Plug the SmartCord into this connector. Page 6

Dim Button

Press to adjust display brightness. There are three brightness settings, plus Dark Mode. In the Dark Mode, the power-on indication will be changed to a dim "AD "HD," or "CD" (indicating Auto, Highway, or City Dark). In the Dark Mode, PASSPORT's meter will not display during an alert, only the audio will alert you. Page 9

Mute Button

Briefly press this button (next to the display) to silence the audio for a specific alert. (The audio will alert you to the next encounter.) Page 8

EZ-Programming

PASSPORT is ready to go, just plug it in and turn it on. But you can also easily change 9 features for your preferences. Page2-16

Installation Windshield Mount

Power Connection

To power PASSPORT, plug the small end of the SmartCord, (telephone-type connector) into the modular jack on PASSPORT's right side, and plug the lighter plug adapter into your vehicle's lighter socket or accessory socket.

PASSPORT operates onl 2 volts DC negative ground only. The lighter plug provided is a standard size and will work in most vehicles. However, some vehicles may require our optional sleeve to ensure a snug fit. If so, simply call or visit our website. Of course, your lighter socket must be clean and properly connected for proper operation.

NOTE: Depending on your vehicle, the lighter socket power may either be continuously on, or it may be switched on and off with your ignition switch.

Optional power cords

See the Accessories section for details on our optional Direct-wire SmartCord.

Mounting Location

WARNING: ESCORT cannot anticipate the many ways PASSPORT can be mounted. It is important that you mount PASSPORT where it will not impair your view nor present a hazard in case of an accident.

Where to mount PASSPORT

For optimum detection performance, we recommend the following:

• Using the Windshield Mount, mount your PASSPORT level, and high enough on your front windshield to provide a clear view of the road from the front and rear.
- Mount PASSPORT away from windshield wipers, other solid objects, and heavily tinted areas that might obstruct the radar antenna or laser lens.

Windshield Mount

PASSPORT's EasyMount windshield bracket is designed for unobtrusive and hassle-free mounting.

1 Depress the adjustment button on the top of PASSPORT (by the word ESCORT) and slide the EasyMount bracket into the slot until it is locked into the position which best fits the angle of your windshield (there are four settings available). For extremely horizontal or extremely sloped windshields, the EasyMount bracket can be bent.
To ensure that the suction cups adhere to the windshield firmly, be sure to keep both your windshield and the suction cups clean.
2 'To adjust PASSPORT' on your windshield, use the EasyMount adjustment button located on the top of the PASSPORT, and slide PASSPORT forward or backward to obtain a level horizontal position.

When installed and adjusted properly, the back top edge of PASSPORT should rest solidly against your windshield.

Caution!

A few vehicles (including some Porsches) have windshields with a soft anti-laccrative coating on the inside surface. Use of suction cups will permanently mar this coating. Consult your dealership or the vehicle owner's manual to determine if your windshield has this coating.

User's Tip

You can leave the EasyMount bracket in place on your windshield, and easily remove PASSPORT by pressing the adjustment button and sliding PASSPORT off the mount. Again, be sure to position the bracket where it won't present a hazard in the event of an accident. Additional mounts are available.

Controls and Features

Power and Volume Control

To turn PASSPORT on and adjust the alert tone volume level, rotate the thumbwheel on PASSPORT's left side. Turn the control away from you to increase the audio volume. When you turn PASSPORT on, it goes through a sequence of alerts.

If you prefer, you may program your PASSPORT for a shorter power-on sequence. See the EZ-Programming section for details.

Power-on indication

After PASSPORT's start-up sequence is complete, the alphanumeric display will show Highway, City, or Auto to indicate which sensitivity mode is selected.

If you prefer, you can select alternate power-on displays. See the EZ-Programming section for details.

AutoMute

Your PASSPORT has our patented AutoMute feature. After PASSPORT alerts you to a radar encounter at the volume you have selected, the AutoMute feature will automatically reduce the volume to a lower level. This keeps you informed without the annoyance of a continuous full-volume alert.

If you prefer, you can turn the AutoMute feature off. See the EZ-Programming section for details.

Mute

The Mute button, located on PASSPORT's front panel and SmartCord, allows you to silence the audio alert during a radar encounter.

To mute the audio for a single specific signal, briefly press the Mute button. After that radar encounter has passed, the mute will automatically reset and the audio will alert you to the next encounter.

Auto / Highway / City Switch

The City button selects PASSPORT's sensitivity mode. We recommend the Auto (AutoSensitivity) mode for most driving. PASSPORT's AutoSensitivity mode provides long-range warning, with minimum false alarms. In this mode, PASSPORT's internal computer continuously analyzes all incoming signals and intelligently adjusts the sensitivity circuits.

You can also select conventional Highway and City modes. When driving in urban areas where annoying X-band intrusion alarms and door openers are common, City mode can be engaged to lower X-band sensitivity and reduce X-band alerts. Full sensitivity is maintained on all other bands. You can customize PASSPORT's City mode sensitivity. See the EZ-Programming section for details.

Dim / Dark Switch

PASSPORT's Dim button selects the brightness of PASSPORTs display. There are four settings: Maximum, Medium, Minimum, and Dark. Press the Dim button to select your preferred brightness.

If you prefer, you can have PASSPORT always turn on at a specific brightness. See the EZ-Programming section for details.

Dark Mode

When you select the Dark mode with the Dim switch, PASSPORT changes to a very inconspicuous power-on indication: a very dim AD, HD, or CD. (In this display, the A, H, or C indicates Auto, Highway, or City, and the D indicates Dark.)

When PASSPORT is in the Dark mode, the display will not show visual alerts when PASSPORT detects signals. Only the audible alert will tell you of detected signals.

If you prefer, you can have PASSPORT's display totally dark(see the EZ-Programming section) and use the visual alerts on the SmartCord.

Audible Alerts

For Radar signals:

PASSPORT uses a Geiger-counter-like sound to indicate the signal strength and type of radar signal being encountered.

When you encounter radar, a distinct audible alert will sound and occur faster as the signal gets stronger. When the signal is very strong, the audible alerts will blend into a solid tone. This allows you to judge the distance from the signal source without taking your eyes from the road.

Each band has a distinct tone for easy identification.

X-band = beep tone K-band = raspy brap tone Ka-band = double-brap tone POP = solid brap tone

For Laser and POP signals:

Since laser and POP signals are a possible threat no matter how weak, PASSPORT alerts you to these signals with a full alert.

Controls and Features

Power Connector

PASSPORT's power jack uses a telephone-type connector. This 4-conductor connector only works with the included coiled SmartCord, or the optional Directwire SmartCord.

The coiled SmartCord is a special power cord that has a power-on indicator (which only lights up when the 8500 is turned on), a bright alert light that warns of radar or laser, and a convenient mute button right on the plug. It's perfect for any car where reaching the detector's mute button on the windshield is a stretch. For discreet night driving, put PASSPORT in the Dark mode, and use the SmartCord for your visual alerts. Other drivers won't know you have a detector.

An optional Direct-wire SmartCord is also available. This version includes a small display module, which can be wired directly into your electrical system, with 40 foot straight cord to route to your PASSPORT.

For more information or to order, call us toll-free at 1-800-433-3487.

Signal Strength Meter

PASSPORT's alphanumeric display consists of 280 individual LEDs, to provide an intuitive ultra-bright display of signal strength and text messages.

PASSPORT's standard bar-graph signal strength meter only displays information on a single radar signal. If there are multiple signals present, PASSPORT's internal computer determines which is the most important threat to show on the bar-graph meter.

When PASSPORT detects radar, it displays the band (X, K, or Ka), and a precise bar graph of the signal strength. When PASSPORT detects a laser signal, the display will show "LASER."

NOTE: If you are operating PASSPORT in the Dark mode, the display will not light when a signal is detected—only the audio, and the flashing alert lamp on the SmartCord.

ExpertMeter

PASSPORT's ExpertMeter option is an advanced display for experienced detector users. Please use PASSPORT for a few weeks to get familiar with its other features before using ExpertMeter.

To use the ExpertMeter instead of the bar graph signal strength meter, you must select ExpertMeter in PASSPORT's EZ-Programming (see page12-15).

PASSPORT's ExpertMeter simultaneously tracks up to 8 radar signals. It shows you detailed information on up to 2 Ka-band, 2 K-band, and 4 X-band signals.

ExpertMeter can help you spot a change in your normal driving environment; for example, a traffic radar unit being operated in an area where there are normally other signals present.

The ExpertMeter is actually a miniature spectrum analyzer. It shows what band each signal is and its signal strength.

KA||K||X||||

Above is the ExpertMeter Display if PASSPORT was detecting 2 strong Ka-band, 2 strong K-band, and 4 strong X-band signals.

As you can see, there are vertical lines after each band designator. Each line shows a signal being detected. The height of each line shows the relative signal strength of that signal.

NOTE: If you use ExpertMeter, the brief signal shown in the power-on sequence when you turn on your PASSPORT will also be in ExpertMeter: an X with a single vertical line.

A few more examples will help you better see how the ExpertMeter works.

K×11.

Here ExpertMeter shows 1 strong K-band signal, and three X-band signals, two strong and one weak.

KA, X,

Here ExpertMeter shows 1 weak Ka-band signal, and three weak X-band signals.

X

On very weak signals, there will not be a vertical line at all. This shows a very weak X-band signal.

ExpertMeter Details

The band designators (X, K, Ka) will stay on the display for a few seconds after the signal has passed. This allows you to see what the unit detected, even on very brief signals.

However, the vertical lines representing individual signals continuously change (several times a second) to give you a continuous instantaneous view of all radar signals present.

SpecDisplay

8500 X50's new SpecDisplay option is also for the experienced detector user. In this mode, PASSPORT will display the actual numeric frequency of the radar signal being received.

K 24.150

SpecDisplay shows one K-band signal at 24.150 gigabertz.

NOTE: Even long-time detector users will require a significant amount of time to get familiar with this new level of information about detected signals.

How to use EZ-Programming

There are 9 user-selectable options so you can customize your 8500 X50 for your own preferences. The buttons labeled CITY and DIM are also used to enter the Program Mode, REVIEW your current program settings, and to CHANGE any settings as desired. The words PROGRAM, REVIEW, and CHANGE are located on the top of the detector, and are highlighted in dark blue graphics. Pages14-16 explain each option in more detail.

How to use EZ-Programming

1 To enter Program Mode, press and hold both top buttons down for 2 seconds. The unit will beep twice, and will display the word Program.
2 Then press the REVIEW button to review the current settings. You can either tap the button to change from item to item, or hold the button to scroll through the items.
3 Press the CHANGE button to change any setting. You can either tap the button to change from setting to setting, or hold the button to scroll through all the options.
4 To leave the Program Mode, simply wait 8 seconds without pressing any button. The unit will displate complete, beep 4 times, and return to normal operation.

An example

Here is how you would turn PASSPORT's AutoMure feature off.

1 Enter the Program Mode by holding both the city and dim buttons down for 2 seconds. PASSPORT will beep twice and display Program.
2 Then hold the REVIEW button down. PASSPORT will scroll through the categories, starting with Pilot Light (Pilot), then Power-on sequence (PurOry), then Signal strength meter (Meter), and then AutoMute (eMute).
3 Release the REVIEW button when PASSPORT shows the AutoMute item. Since the factory selling is for AutoMute to be on, PASSPORT will display aMute ON. If you accidentally don't release the Review button in time, and PASSPORT goes to the next category, hold the Review button down again, and after PASSPORT scrolls through all categories, it will begin again at the top of the list.
4 Press the CILANGE button to change from amute ON to amute OFF.
5 To complete the Programming, simply wait 8 seconds without pressing any button. PASSPORT will display complete, beep 4 times, and return to normal operation.

Overview of EZ-Programming

Details of EZ-Programming

Pilot Light (Power-on indication)

NOTE: When you are using the Dark mode, the display will only show HD, AD, or CD, (Highway-Dark, Auto-Dark, or City-Dark).

PilotHWY (Full description) In this setting, PASSPORT will display "Highway," "City," or "Auto" as its power-on indication. (factory default)

Pilot H (Letter) In this setting, PASSPORT will display "II" for Highway, "C" for City, and "A" for Auto.

Pilot H.> (Letter with scanning dot) In this setting, PASSPORT will display "H" for Highway, "C" for City, and "A" for Auto. Also, a single dot will continuously scroll across the display.

Pilot+ (Symbol) In this setting, PASSPORT will display "+" for Highway, "-" for Auto, and "-" for City.

Pilot+.> (Symbol with scanning dot) In this setting, PASSPORT will display "+" for Highway, "." for Auto, and "-" for City. Also, single dot will continuously scroll across the display.

Pilot(+) (Scanning symbol) In this setting, PASSPORT will display "+" for Highway, "-" for Auto, and "-" for City. Each will continuously scroll across the display.

Pilot U (Vehicle voltage)

In this setting, PASSPORT will continually display "H" for Highway, "C" for City, and "A" for Auto, and the vehicle's voltage. If the vehicle's voltage drops below 10.5 volts, a low voltage warning is displayed, followed by an audible alert. A high voltage warning is also given if the voltage goes above 6.5 volts. The high-voltage warning is also followed by an audible alert.

Power-on Sequence

PurOnSTD (Standard) In this setting, each time you turn PASSPORT on it will display "Passport," "8500 X50," "LASER," "Ka-band," "K-band," "X-band," followed by a brief X-band alert. (factory default) If any bands have been disabled, a double X-band tone and corresponding message (i.e. "X OFF"), will alert you that one or more bands have been turned off.

PurOnFST (Fast power-on) In this setting, PASSPORT will provide a single X-band tone if all bands are enabled. If any bands have been disabled, a double X-band tone and corresponding message (i.e. "X OFF"), will alert you that one or more bands have been turned off.

Signal Strength Meter

MeterSTU (Standard meter) In this setting, the meter displays the band of the received signal, and a bar graph shows the relative signal strength. (factory default)

MeterEXP (ExpertMeter)

In this setting, the meter simultaneously tracks multiple radar signals. It can display up to 2 Ka band, 2 K band, and 4 X band signals at the same time.

NOTE: The ExpertMeter feature is explained in more detail on page0-11.

MeterSPC (SpecDisplay meter) In this setting, the meter displays the actual numeric frequency of the radar signal received.

NOTE: The SpecDisplay feature is explained in more detail on page1.

AutoMute

aMute ON (AutoMute on) In this setting, PASSPORT's audio alerts will initially be at the volume you set, but after a few seconds, PASSPORT will automatically reduce the volume level, to keep you informed, but not annoyed. (factory default)

aMuteOFF (AutoMute off)

With AutoMute off, PASSPORT's audio alerts will remain at the volume you set for the duration of the radar encounter.

Audio Tones

Tone STD (Standard toncs) This setting uses more pleasing tones. (factory default)

ToneLOUD (Loud tones)

This setting uses tones that are more piercing. This setting is recommended for louder vehicles.

City Mode Sensitivity

City STU (Standard) In this setting, when you put PASSPORT in the City mode, X-band sensitivity is significantly reduced, to reduce annoyance from X-band intrusion alarms and motion sensors. (factory default)

City LoX (Low X band sensitivity) In this setting, when you put PASSPORT in the City mode, X-band sensitivity is reduced more than the standard setting. This will reduce X band alarms from other sources even further, but also significantly reduces range to X band traffic radar.

City NoX (No X band sensitivity) In this setting, when you put PASSPORT in the City mode, PASSPORT will not respond to any X band signals. WARNING: Only choose this setting if you are absolutely certain that there are no X band traffic radar units where you drive.

NOTE: These settings only apply when PASSPORT is operated in City mode. X-band sensitivity is not affected when used in "Auto," or "Highway" modes.

Details of EZ-Programming

Brightness

Brit LAST (last)

In this setting, when you turn on PASSPORT, the display will be the last brightness you had selected during operation with the dim button. (factory default)

Br t MIN (minimum)

In this setting, each time you turn on PASSPORT, the display will be at the lowest brightness.

Br t MED (medium)

In this setting, each time you turn on PASSPORT, the display will be at the medium brightness.

Br t MAX (maximum)

In this setting, each time you turn on PASSPORT, the display will be at the maximum brightness.

Br t DARK (dark)

In this setting, each time you turn on PASSPORT, the display will be in the dark mode. This is recommended only when using PASSPORT's SmartCord so you have a visual indication to confirm that PASSPORT is operational.

Dark Mode

Dark STD (standard)

In this setting, when you select the dark

mode, the only display will be a very dim HD, AD, or CD, indicating Highway-Dark, Auto-Dark, or City-Dark). (factory default)

Dark ALL (all)

In this setting, when you select the dark mode using the dim button, PASSPORT's display will be totally dark, without even displaying any power-on indication. In this setting, PASSPORT's SmartCord will provide the only visual indication to confirm that PASSPORT is operational.

Bands

BandsOFT

In this setting all radar and laser frequencies, (with the exception of POP mode) are monitored. This is the factory setting, and it is recommended that you use your PASSPORT in this mode.

BandshOD

In this setting, PASSPORT will warn you with an audible alert, and associated text message stating which band has been modified (i.e. "X OFF"). This warning is displayed during the start up sequence (standard or fast).

WARNING: Only modify bands if you are absolutely certain that there are no traffic radar units using that specific band in your area.

Specifications

Features and Specifications

Operating Bands

• X-band 10.525 GHz ± 25 MHz

• K-band 24.150 GHz ± 100 MHz

• Ka-band 34.700 GHz ± 1300 MHz

• Laser 904nm, 33 MHz bandwidth

Radar Receiver / Detector Type

• Superheterodyne VTO

• Scanning Frequency Discriminator

• Digital Signal Processing (DSP)

Laser Detection

• Quantum Limited Video Receiver

• Multiple Laser Sensor Diodes

Display Type

• 280 LED Alphanumeric

• Bar Graph, ExpertMeter, or SpecDisplay

• 3-Level Dimming, plus Dark Mode

Power Requirement

• 12VDC, Negative Ground

• SmartCord (included)

Programmable Features

• Power-On Indication

• Power-On Sequence

- Signal Strength Meter

• AutoMute

- Audio Tones

• City Mode Sensitivity

• Display Brightness

- Dark Mode

• Radar / Laser Bands

Sensitivity Control

• AutoSensitivity, Highway and City

Auto Calibration Circuitry

SmartShield VG2 Immunity

Dimensions (Inches)

• 1.25 H x 2.85 W x 5.32 L

Interpreting Alerts

Although PASSPORT has a comprehensive warning system and this handbook is as complete as we can make it, only experience will teach you what to expect from your PASSPORT and how to interpret what it tells you. The specific type of radar being used, the type of transmission

(continuous or instant-on) and the location of the radar source affect the radar alerts you receive.

Alert

The following examples will give you an introduction to understanding PASSPORT's warning system for radar and laser alerts.

PASSPORT begins to sound slowly, then the rate of alert increases until the alert becomes a solid tone. The Signal Meter ramps accordingly.	You are approaching a continuous radar source aimed in your direction.
PASSPORT emits short alerts for a few seconds and then falls silent only to briefly alert and fall silent again.	An instant-on radar source is being used ahead of you and out of your view.
PASSPORT suddenly sounds a continuous tone for the appropriate band received. All segments in the Signal Strength Meter are lit.	An instant-on radar source or laser source is being used nearby. This kind of alert requires immediate attention!
A brief laser alert.	Laser is being used in the area. Because laser is inherently difficult to detect, any laser alert may indicate a source very close by.
PASSPORT receives weak signals. These signals may be a little stronger as you pass large, roadside objects. The signals increase in frequency.	A moving patrol car with continuous radar is overtaking you from behind. Because these signals are reflected (reflections are increased by large objects), they may or may not eventually melt into a solid point even when the patrol car is directly behind you.
PASSPORT alerts slowly for awhile and then abruptly jumps to a strong alert.	You are approaching a radar unit concealed by a hill or an obstructed curve.

Alert
Explanation

PASSPORT alerts intermittently. Rate and strength of alerts may be consistent or vary wildly.	A patrol car is traveling in front of you with a radar source aimed forward. Because signals are sometimes reflected off of large objects and sometimes nothe alerts may seem inconsistent.
PASSPORT alerts intermittently. Rate and strength of signal increases with each alert.	A patrol car is approaching from the other direction, sampling traffic with instant-on radar. Such alerts should be taken seriously.
PASSPORT gives an X-band alert intermittently.	You are driving through an area populated with radar motion sensors (door openers, burglar alarms, etc.). Since these transmitters are usually contained inside buildings or aimed toward OR away from you, they are typically not as strong or lasting as a real radar encounter.
	CAUTION: Since the characteristics of these alerts may be similar to some of the preceding examples, over confidence in an unfamiliar area can be dangerous. Likewise, if an alert in a commonly traveled area is suddenly stronger or on a different band than usual, speed radar may be set up nearby.

How Radar Works How POP Works

How Radar Works

Traffic radar, which consists of microwaves, travels in straight lines and is easily reflected by objects such as cars, trucks, even guardrails and overpasses. Radar works by directing its microwave beam down the road. As your vehicle travels into range, the microwave beam bounces off your car, and the radar antenna looks for the reflections. Using the Doppler Principle, the radar equipment then calculates your speed by comparing the frequency of the reflection of your car to the original frequency of the beam sent out. Traffic radar has limitations, the most significant of these being that it typically can monitor only one target at a time. If there is more than one vehicle within range, it is up to the radar operator to decide which target is producing the strongest reflection. Since the strength of the reflection is affected by both the size of the vehicle and its proximity to the antenna, it is difficult for the radar operator to determine if the signal is from a sports car nearby or a semi-truck several hundred feet away.

Radar range also depends on the power of the radar equipment itself. The strength of the radar unit's beam diminishes with distance. The farther the radar has to travel, the less energy it has for speed detection. Because intrusion alarms and motion sensors often operate on the same frequency as X-Band radar, your PASSPORT will occasionally receive non-police radar signals. Since these X-Band transmitters are usually contained inside of a building, or aimed toward the ground, they will generally produce much weaker readings than will a true radar encounter. As you become familiar with the sources of these pseudo alarms in your daily driving, they will serve as confirmation that your PASSPORT's radar detection abilities are fully operational.

How "POP" Works

"POP" mode is a relatively new feature for radar gun manufacturers. It works by transmitting an extremely short burst, within the allocated band, to identify speeding vehicles in traffic. Once the target is identified, or "POPPED," the gun is then turned to its normal operating mode to provide a vehicle tracking history, (required by law).

NOTE: According to the operator's manual from the radar gun manufacturer, tickets should not be issued in this mode.

How TSR Works

TSR Signal Ranking Software

Your radar detector includes a new optional boost in anti-falsing software to eliminate excessive alerts from erroneous X and K-band sources. One example of this is traffic flow monitoring systems. These systems, which are becoming more widely used in several states, generate K-band signals to measure the flow of traffic on interstate highways. Unfortunately most detectors alert to these sources as a real threat. Our new proprietary software (TSR), intelligently sorts, ranks and rejects this type of false alarm automatically. The result is ultimate protection without excessive false alarms.

The TSR software is turned on by default in the Programming section of your detector. If you believe this type of system isn't used in your area, you can simply turn it off. Otherwise, your detector is ready to start protecting you right out of the box.

If you have any questions about this new feature, please give us a call or visit our website for more details.

How Laser Works

How Laser (Lidar) Works

Laser speed detection is actually LIDAR (Light Detection and Ranging). LIDAR guns project a beam of invisible infrared light. The signal is a series of very short infrared light energy pulses, which move, in a straight line, reflecting off your car and returning to the gun. LIDAR uses these light pulses to measure the distance to a vehicle. Speed is then calculated by measuring how quickly these pulses are reflected given the known speed of light.

LIDAR (or laser) is a newer technology and is not as widespread as conventional radar, therefore, you may not encounter laser on a daily basis. And unlike radar detection, laser detection is not prone to false alarms. Because LIDAR transmits a much narrower beam than docs radar, it is much more accurate in its ability to distinguish between targets and is also more difficult to detect. AS A RESULT, EVEN THE BRIEFEST LASER ALERT SHOULD BE TAKEN SERIOUSLY.

There are limitations to LIDAR equipment. LIDAR is much more sensitive to weather conditions than RADAR, and a LIDAR gun's range will be decreased by anything affecting visibility such as rain, fog, or smoke. A LIDAR gun cannot operate through glass and it must be stationary in order to get an accurate reading. Because LIDAR must have a clear line of sight and is subject to cosine error (an inaccuracy, which increases as the angle between the gun and the vehicle, increases) police typically use LIDAR equipment parallel to the road or from an overpass. LIDAR can be used day or night.

Service

Service Procedure

If Your PASSPORT ever needs service, please follow these simple steps:

1 Check the troubleshooting section of this manual. It may have a solution to your problem.

2 Call us at 1-800-543-1608. We may be able to solve your problem over the phone. If the problem requires that you send your PASSPORT to the factory for repair, we will provide you with a Service Order Number, which must be included on the outside of your shipping box.

Enclose The Following Information With Your PASSPORT:

• Your Service Order Number
• Your name and return address
• Your daytime telephone number
  • A description of the problem you are experiencing.

Out Of Warranty Repairs

For out of warranty repairs, include prepayment in the amount you were quoted by the ESCORT Customer Service Representative. If the detector has been damaged, abused or modified, the repair cost will be calculated on a parts and labor basis. If it exceeds the basic repair charge, you will be contacted with a quotation. If the additional payment is not received within 30 days (or if you notify us that you choose not to have your PASSPORT repaired at the price quoted), your PASSPORT will be returned, without repair. Payment can be made by check, money order, or credit card.

Mail PASSPORT and Power Cord To:

ESCORT

Customer Service Department

Service Order Number

5/40 West Chester Road

West Chester, Ohio 45069

For your own protection, we recommend that you ship your PASSPORT postpaid and insured. Insist on a proof of delivery, and keep the receipt until the return of your PASSPORT

Troubleshooting

Problem	Solution
PASSPORT beeps briefly at the same location every day, but no radar source is in sight.	• An X-band motion sensor or intrusion alarm is located within range of your route. With time, you will learn predictable patterns of these signals.
PASSPORT does not seem sensitive to radar or laser.	• Make sure that windshield wipers do not block PASSPORT's radar antenna and that the laser lens is not behind tinted areas.• Determine if your vehicle has an Insta clear, Electr clear or solar reflective windshield which may deflect radar or laser signals.• PASSPORT may be in City Mode.
PASSPORT did not alert when a police car was in view.	• VASCAR (Visual Average Speed Computer and Recorder) a stopwatch method of speed detection, may be in use.• Officer may not have radar or laser unit turned on.
PASSPORT's display is not working.	• Press the Dim button to deactivate Dark Mode.
PASSPORT's audible alerts are less loud after the first few alerts.	• PASSPORT is in AutoMute Mode. See page 8 for details.
PASSPORT bounces or sags on windshield.	• PASSPORT is not making contact with the windshield to provide stability. While holding down PASSPORT's EasyMount button, slide PASSPORT further back toward the windshield so that the back top edge makes firm contact.
PASSPORT's power-on sequence reoccurs while you are driving.	• A loose power connection or dirty lighter socket can cause PASSPORT to be briefly disconnected.
Your 14-year old son has changed all 9 of the EZ-Programming options.	You can return all of the programming options to the factory defaults by holding down the City, Dim, and Mute buttons while you turn PASSPORT on.

Problem	Solution
PASSPORT will not turn on.	Check that volume control is ON.Check that vehicle ignition is ON.Check that vehicle lighter socket is functional.Try PASSPORT in another vehicle.
PASSPORT feels very warm.	It is normal for PASSPORT to feel warm.

Explanation of Displays

RD Sensitivity control is in Auto mode, display is in Dark mode (page 9)

HD Sensitivity control is in Highway mode, display is in Dark mode (page 9)

CD Sensitivity control is in City mode, display is in Dark mode (page 9)

No display PASSPORT is in the Dark mode, and is programmed for Dark All (page 9.16)

PilotHWY One of the many programming messages (pages 12-16)

X|, or K|, PASSPORT has been programmed in the ExpertMeter Mode (page 10-11) or KAI etc.

Self Cal PASSPORT is running a self-calibration test

Service PASSPORT has failed the calibration test. Contact ESCORT for repair Required

Warranty

ESCORT One Year Limited Warranty

ESCORT warrants your PASSPORT against all defects in materials and workmanship for a period of one (1) year from the date of the original purchase, subject to the following terms and conditions:

The sole responsibility of ESCORT under this Warranty is limited to either repair or, at the option of ESCORT, replacement of the PASSPORT detector. There are no expressed or implied warranties, including those of fitness for a particular purpose or merchantability, which extend beyond the face hereof. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you

ESCORT is not liable for any incidental or consequential damages arising from the use, misuse, or mounting of the PASSPORT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This Warranty gives you specific rights. You may have other legal rights, which va from state to state. This Warranty does no apply if the serial number on the housing of the PASSPORT has been removed, or if your PASSPORT has been subjected to physical abuse, improper installation, or modification.

ESCORT Extended Service Plan

ESCORT offers an optional extended service plan. Contact ESCORT for details.

Accessories

Accessories

The following accessories and replacement parts are available for PASSPORT 8500 X50.

Standard Coiled SmartCord..... \$29.95 Available in red or blue

Direct-wire SmartCord \$29.95

Accessory Kit......\$14.95

Visor Clip \$9.95

Zippered Travel Case...... \$14.95

Register

online:

@WWW

EscortRadar.com

▶ Remove card along performers ▼

ESCORT

ESCORT PRODUCT REGISTRATION CARD

If you purchased your detector directly from ESCORT, you do not need to fill this out.

If you did not purchase your detector directly from ESCORT, please fill out this section and return to us, or register online at our web address: www.EscortRadar.com

1. First Name: Middle Initial Last Name

Address

City State

E-mail and/or Phone (In case we have a question).

1. Product Purchased PASSPORT 8500 X50 □ Red □ Blue

2. Place of Purchase ____

3. Primary reason for purchasing this ESCORT product ____

4. Would you like to be added to our mailing list? □ Yes □ No

5. Would you like us to e-mail you with updates? □ Yes □ No
6. Would you like to be added to our mailing list? □ Yes □ No
7. Would you like us to e-mail you with updates? □ Yes □ No

5440 WEST CHESTER RD WEST CHESTER OH 45069-9789

ATTN: CUSTOMER SERVICE ESCORT INC

27007469-18 511-75 771370100+

BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO. 300 WEST CHISTER OH

NO POSTAGE NECESSARY IF MILED IN THE UNITED STATES

▲ Reserve cost of long-term obligations ▲