SWS 2300 - Weather Station SENCOR - Free user manual and instructions

Product Type	Wireless Weather Station
Model	SWS 2300
Brand	Sencor
Display Type	LCD color display
Base Unit Dimensions	150 x 100 x 20 mm (approx.)
Base Unit Weight	200 g (approx.)
Power Supply (Base)	2 x AAA batteries (not included) or DC adapter (optional)
Power Supply (Sensor)	2 x AAA batteries (not included)
Wireless Frequency	433 MHz
Wireless Range	Up to 100 m (open area)
Number of Sensors Supported	Up to 3 sensors (including included one)
Indoor Temperature Range	0°C to 50°C (32°F to 122°F)
Indoor Humidity Range	1% to 99% RH
Outdoor Temperature Range	-40°C to 60°C (-40°F to 140°F)
Outdoor Humidity Range	1% to 99% RH
Barometric Pressure Range	300 to 1100 hPa
Weather Forecast	Sunny, partly cloudy, cloudy, rainy, stormy, snowy
Moon Phase Display	8 phases
Clock and Calendar	12/24 hour, date, alarm, snooze
Memory	Min/Max records for temperature and humidity
Backlight	Yes, adjustable
Maintenance	Clean with soft dry cloth; avoid liquids and solvents
Safety	Keep away from water; use only specified batteries; do not expose to extreme temperatures
Spare Parts / Repairability	Batteries and optional additional sensors available; no user-serviceable parts

Frequently Asked Questions - SWS 2300 SENCOR

How do I set the time and date on the Sencor SWS 2300?

Press and hold the SET button for 2 seconds. Use the UP or DOWN buttons to adjust the hour, minute, year, month, and day. Press SET to confirm each step.

Why is the outdoor sensor not connecting to the base unit?

Ensure the sensor is within range (up to 100 m open field). Check that batteries are installed correctly and not depleted. Press the CHANNEL button on the base unit to re-sync. You may need to press the sensor's TX button.

Can I replace the outdoor sensor with a different model?

The SWS 2300 is designed to work with Sencor compatible sensors (433 MHz). Using a different model may cause connection issues. For best results, use an original Sencor replacement sensor.

How to reset the weather station to factory settings?

Remove all batteries from both the base unit and the sensor. Wait 30 seconds. Reinsert batteries in the sensor first, then in the base unit. The device will reset and enter pairing mode automatically.

The backlight on the display is not working. What should I do?

Press the SNOOZE or LIGHT button to activate the backlight. If it still doesn't work, check if the batteries are low. The backlight may dim automatically to save power in battery mode.

How do I switch between Celsius and Fahrenheit?

Press the °C/°F button (usually located on the back or side of the base unit) to toggle between Celsius and Fahrenheit.

What does the pressure trend arrow mean?

An upward arrow (↑) indicates rising pressure, usually improving weather. A downward arrow (↓) indicates falling pressure, often leading to storms. A flat arrow (→) means stable pressure.

Can I display multiple sensors on the same screen?

Yes, if you have additional sensors. Press the CHANNEL button to cycle through channels 1, 2, 3, and automatic rotation. Each channel corresponds to a different sensor.

How to clean and maintain the weather station?

Wipe the base unit and sensor with a soft, dry cloth. Never use abrasive cleaners or solvents. Ensure the sensor is protected from direct water exposure. Replace batteries when low.

Why is the temperature reading inaccurate?

Place the sensor in a shaded, ventilated area away from direct sunlight, windows, or heat sources. The base unit should be indoors, away from drafts. Allow 24 hours for the readings to stabilize.

USER MANUAL SWS 2300 SENCOR

EN User Manual WEATHER STATION