AE-DC8322-G2PRO - Dash cam Hikvision - Free user manual and instructions

Product Type	Dash Cam
Brand	Hikvision
Model	AE-DC8322-G2PRO
Image Sensor	CMOS
Front Resolution	2160p @ 30 fps or 1080p @ 60 fps
Rear Resolution	1080p @ 25 fps
Front Lens Angle	135° (D), 124° (H)
Rear Lens Angle	125° (D), 110° (H)
Aperture	f/1.75
Video Compression	H.265
Display	3-inch 854×480 IPS color touchscreen
Built-in Storage	64 GB eMMC
MicroSD Card Support	32 GB to 256 GB (V30 or above recommended)
Communication	Wi-Fi, Bluetooth
Sensors	G-sensor, GPS
Power Supply	5 VDC, 2 A
Power Consumption	Maximum 6 W
Working Temperature	-20°C to 65°C (-4°F to 158°F)
Working Humidity	0% to 95%
Dimensions (without bracket)	100 × 85 × 38 mm (3.6 × 3.5 × 2.8 in)
Weight	150 g (0.33 lb)
Mounting	Adhesive pad and electrostatic sticker
App	HikDashcam (iOS/Android)
Special Features	Voice control, parking mode, firmware upgrade via app

Frequently Asked Questions - AE-DC8322-G2PRO Hikvision

How do I install the dashcam?

Clean the windshield, apply the electrostatic sticker, then mount the dashcam using the 3M adhesive pad. Route the power cable to the fuse box or cigarette lighter. For the rear camera, attach it to the rear window and connect via the provided cable.

How do I connect the dashcam to my phone?

Download the HikDashcam app. Turn on the dashcam Wi-Fi (default SSID: HIKVISION-xxxx, password: 1234567890). In the app, tap Wi-Fi Connection and select the dashcam's network. You can then view live footage and change settings.

How do I reset the dashcam to factory defaults?

Press and hold the RESET button using a pin or paperclip until you hear the startup melody. The dashcam will restore to default settings, including the Wi-Fi password.

What type of microSD card is recommended?

Use a microSD (TF) card of V30 speed class or above, with a capacity from 32 GB to 256 GB. Format the card in the dashcam before first use for best performance.

Why is there no GPS signal?

Ensure GPS is enabled in settings (default is on). Move the dashcam away from metal objects and to a location with clear sky view. Avoid underground garages or areas with heavy signal interference.

How do I enable parking mode?

Parking mode activates automatically when the engine is off, but only if the dashcam is powered via a 3-lead buck line connected directly to the fuse box. The dashcam will record at 1 fps during parking.

How do I update the firmware?

Open the HikDashcam app while connected to the dashcam via Wi-Fi. Tap the Upgrade button if a new firmware version is available. The dashcam will download and install it automatically.

Why is my recording blurry?

Remove any protective film from the lens. Clean the windshield and lens with a soft cloth. Ensure the dashcam angle is adjusted correctly and the windshield is free of dirt or smudges.

What should I do if the dashcam keeps falling off?

Clean the windshield thoroughly before installation. Make sure the 3M adhesive pad is firmly pressed onto the electrostatic sticker. Replace the adhesive pad if it has lost its stickiness.

How do I change the Wi-Fi password?

Connect to the dashcam via the HikDashcam app. Go to device settings and change the Wi-Fi password. The default password is 1234567890. After first login, create a new password to prevent unauthorized access.

USER MANUAL AE-DC8322-G2PRO Hikvision

Line drawing of a HIKVISION remote control device (no text or symbols on body)

HikDashcam AE-DC8322-G2PRO

User Manual

A Legal Statement

© 2022 Hangzhou HikAuto Technology Co., Ltd. All rights reserved. Specifications subject to change without notice.

HikAuto Technology Co., Ltd. is a division of Hikvision Digital Technology, Ltd., No.555 Qianmo Road, Binjiang District, Hangzhou 310051, China • Tel: [phone]

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images, and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.

Trademarks

• HIKVISION and other Hikvision trademarks and logos are the properties of Hikvision in various jurisdictions.
  • Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS." HIKAUTO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT Y OWN RISK. IN NO EVENT WILL HIKAUTO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OF INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED (BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKAUTO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKAUTO SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKAUTO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NO USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPOL OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

B Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is conne
• Consult the dealer or an experienced radio/TV technician for help.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two condition

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

The equipment should be installed and operated with a minimum distance of 7.9 in (20 cm) between t radiator and your body.

EU Conformity Statement

CE This product and, if applicable, the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, and the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information, please see: www.recyclethis.info.

B Regulatory Information (contin

2006/66/EC (Battery Directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union.

See the product documentation for specific battery information. The battery is marked with this symbol which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

Under Industry Canada regulations, this radio transmitter may operate only using an antenna of a type maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This equipment should be installed and operated with a minimum distance of 20 cm between the radia and your body.

F Install Rear Camera 9

Interior Mounting 9

G Mobile Phone Connection 10

H Basic Operations 11

Start Up/Shut Down Manually 11

Recording 11

Voice Control 11

Firmware Upgrade 11

I Specifications 12

J Cautions 13

Safety Instructions 13

Cautions 13

K Troubleshooting 14

C Packing List

1 Dashcam x 1

4 Electrostatic Sticker x 1

2 Rear Camera x 1 and Connector Cable x 1

5 3-Lead Hardware Kit Power Cable x 1 6 User Manual x 1

3 Accessory Package x 1

Technical line drawing of a mechanical component with no visible text or symbols

Isometric diagram of a mechanical component with two screws and a curved surface, labeled with number 3 (no text or symbols on the diagram itself)

Simple line drawing of a folded paper or document with a red circle labeled '4' at the bottom (no text or symbols on the diagram itself)

D Parts Introduction

1 3M Adhesive Pad
2 Parking Mode Indicator
3 Lens
4 Mini-USB Port for Connection to Computer for Data Transfer and 4G Module Connection
5 Micro-USB Power Cable Port for 3-Lead Buck Line Connection
6 Rear Camera Port
7 Microphone
8 MicroSD (TF) Port
9 Speaker
10 LEDIndicator
- Solid Red: Power on
• Solid Blue: Working properly
11 Reset Button

Figure 1, AE-DC8322-G2PRO Front View

Figure 2, AE-DC8322-G2PRO Rear View

E Install

Illustration of a hand holding a small object with sparkles, no text or symbols present

Figure 3, Apply Electrostatic Sticker

Figure 4, Route Cable to Fuse Box

Clean the windshield and paste the electrostatic Paste the device onto the electrostatic sticker onto the windshield. and route cable to the fuse box for power.

NOTE: The electrostatic sticker prevents residual marks and allows window cleaning and dashcam repositioning.

Avoid introducing air bubbles. DO NOT reapply the film repeatedly.

Figure 5, Connect Power Cord

Line drawing of a digital device with a screen and antenna, enclosed in a red rounded border (no text or symbols)

Figure 6, Adjust Dashcam Angle

Connect the power cord as per the above figure. Adjust the angle to the target direction.

1 Peel off the adhesive release paper on the camera bracket. Install the camera onto the top center of the rear window (interior side) so that it points directly at the road.

2 Connect the camera to the front dashcam by routing the cable as per the following diagram:

Figure 7, Rear Camera Interior Cable Run

Interior view from a car showing the side mirror and exterior view of a parked car, with no visible text or symbols.

Figure 8, Rear Camera Interior Placement on Rear Windshield

G Mobile Phone Connecti

1 Scan the QR code to download and install the HikDashcam app to your mobile phone.

Figure 9, Scan QR Code for HikDashcam

2 Add the dashcam to the app.

a. Run the HikDashcam app.
b. Tap Wi-Fi Connection.
c. In the Wi-Fi list, select the target dashcam's Wi-Fi SSID and enter the Wi-Fi password to establish a connection.

• You can set the dashcam parameters.

- For iOS, go your phone's Wi-Fi settings and connect to the dashcam Wi-Fi.

3 Edit the dashcam password to activate to avoid abnormal recording after connecting the Wi-Fi.

Dashcam Wi-Fi default parameters:

• Wi-Fi SSID: HIKVISION-xxxx (xxxx refers to the last four verification code characters).
  • Wi-Fi password by default is 1234567890
• Create a new password after first login.

H Basic Operations

Start Up/Shut Down Manually

Press and hold the power button for three seconds to shut down the dashcam. Press the power button start the dashcam.

Recording

Recordings are divided into regular videos and emergency videos. You can set the video voice on/off through the system settings or the HikDashcam app.

Voice Control

The dashcam automatically activates voice control upon startup. Perform any of the following command just by saying the phrase out loud:

• "Snapshot"
• "Recording On"
• "Recording Off"

Parking Mode

The AE-DC8322-G2PRO DashCam automatically goes into parking mode when the automobile engine is shut off (only if using a three lead buck line cable connected directly to the fuse box) and the dash continues to record at 1 fps.

Firmware Upgrade

Step 1: Run the HikDashcam app.

Step 2: Connect to the dashcam you would like to upgrade.

Step 3: Tap the Upgrade button to upgrade the firmware.

1

AE-DC8322-G2PRO

Camera
Image Sensor CMOS
Resolution 2160p @ 30 fps + 1080p @ 25 fps, 1080p @ 60 fps + 1080p @ 25 fps
Maximum Front Camera 135° (D), 124° (H)
Lens Angle Rear Camera 125° (D), 110° (H)
Aperture f/1.75
Video Compression H.265
Display Built-in 3" 854 x 480 IPS (In-Plane Switching) color touchscreen
OSD Display time, date, etc.
Image Format JPEG
Storage eMMC (built in): 64 GB
		MicroSD card: 32 GB to 256 GB
Communication Module Wi-Fi, Bluetooth
Sensor G-sensor, GPS
Interfaces
Power Supply USB 2.0
Audio Input Mic
Audio Output Built-in loudspeaker
General
Working Temperature -20° to 65°C (-4° to 158°F)
Working Humidity 0% to 95%
Power Supply 5 VDC, 2 A
Power Consumption Maximum 6 W
Dimension (L x W x H)(w/o Bracket) 100 mm × 85 mm × 38 mm (3.6" × 3.5" × 2.8")
Weight (Approximate) 150 g (0.33 lb)

J Cautions

Safety Instructions

These instructions are intended to ensure that users can use the product correctly to avoid danger or property loss.

Cautions

Injury or equipment damage may occur if any of the cautions are neglected.

• In the use of the dashcam, you must be in strict compliance with the local laws and regulations.
• You are recommended to install the dashcam near the rear mirror to ensure the dashcam can record with the best road view. DO NOT install the dashcam in a location that will block the driver's sight. the user manual for future reference. See initial connection of dashcam in the user manual.
• Purchase the microSD (TF) card from a legal channel. To ensure safe and stable data transmission, recommended to use a microSD (TF) card of V30 or above.
• Format the new microSD (TF) card before using the card.
• To protect the microSD (TF) card from damage, shut down the dashcam before inserting and pulling the microSD (TF) card.
• Operating temperature is from -2 to 70°C (-4 to 158°F).
• To protect the dashcam, DO NOT use it in high temperature, low temperature, or high-humidity environments. Protect the dashcam from rain and dust.
• This Manual is subject to updates. The dashcam functions may vary by model.
• The device's driving assistance function only sends alarm or warning to the driver and cannot replace the driver's judgment. DO NOT rely only on the driving assistance function.

K

	Solution
The dashcam falls off easily	Clean the windshield before installation.Check that the 3M adhesive pad is tightly adhered to the electrostatic film before installation.
Starting the dashcam failed	Check whether the vehicle is started and the power supply is normal.Check whether the car charger is tightly connected.Restore to defaults: Hold the RESET button until the startup music is heard.
The dashcam powers off easily	Make sure the power cord is in good condition.Make sure the power cord is tightly connected to the appropriate interfaces.
Recording is abnormal and indicator is unlit	Make sure that the dashcam started up successfully. Check that the microSD (TF) card is inserted. Check the microSD (TF) card status, e.g., its format and its lifespan. Change the microSD (TF) card if there are problems.
Recording is blurred	Make sure the protective film has been removed.Check that the windshield and the dashcam lens are clean.
Recording is muted	Set audio settings on the device or turn on sound in the HikDashcam app.Turn on sound through the dashcam's audio control function.
Dashcam reboots itself	Check that the car charger is tightly connected. Check whether the car charger is equipped with a 5 VDC, ≥2 A power supply interface.
Mobile phone cannot connect to the dashcam	Make sure the HikDashcam app is installed. Re-pair the dashcam to the app.
The mobile phone cannot check the player or your phone system. Connect the microSD (TF) card to display recordings your computer and display the recordings.
The microSD (TF) card is not detected when connecting the dashcam to a computer with the supplied power cord	The dashcam does not support data transmission, and the supplied power cord is only for charging.If you need to transfer data, connect the microSD (TF) card to your computer.

K Troubleshooting

Check interference from surrounding Wi-Fi signals. Use the dashcam in an Connecting to Wi-Fi environment where there is less interference.

takes a long time Shut down unnecessary programs and apps on your phone to release some resources for the HikDashcam app, then reconnect the Wi-Fi.

Dashcam Wi-Fi password is forgotten
The default password is 1234567890. If you have revised the password, reset the password by doing the following:
1. Hold the RESET button on the dashcam until the startup music is heated by the dashcam will be restored to the defaults.
2. Go to the HikDashcam app's Wi-Fi connection interface.
3. Select the Wi-Fi SSID, and log in with the default password 1234567890.
- Check whether the GPS function is enabled. Normally, the GPS function is enabled by default. Make sure the device is not in a location with a weak signal or no signal such as underground garage.
No GPS signal • Make sure there is no metal around the device because metal can interfere with the GPS signal.
- Make sure the location where the device is installed has good GPS reception.