Drive + Play 2 - Uncategorized HARMAN KARDON - Free user manual and instructions

Product Type	In-Car Digital Media Receiver & Controller
Brand	Harman Kardon
Model	Drive + Play 2
Dimensions	2.5 x 7 x 5 inches
Weight	0.7 lbs
Power Source	12V DC vehicle battery
Compatible Devices	iPod, iPhone, USB flash drives
Display	2-line OLED with adjustable brightness
Audio Output Power	4 x 35W RMS
Connectivity	Bluetooth for hands-free calling; Aux input
Control	Rotary encoder with push button
Supported Audio Formats	MP3, WMA, AAC, WAV
Safety Features	Low battery detection, auto-shutoff
Installation	Requires professional installation (ISO DIN slot)
Maintenance	Wipe with a soft, dry cloth
Spare Parts & Repairability	No user-serviceable parts; contact service center
Warranty	1 year limited
Operating Temperature	32°F to 104°F

Frequently Asked Questions - Drive + Play 2 HARMAN KARDON

How do I reset the Drive + Play 2?

Press and hold the Menu button for 10 seconds until the device reboots.

Which devices are compatible with the Drive + Play 2?

It is compatible with iPod (5th gen and later), iPhone (3GS and later), and USB flash drives formatted as FAT32.

Can I use Bluetooth for music streaming?

The Drive + Play 2 supports Bluetooth for hands-free calling only. For music, use the USB or Aux input.

How do I install the Drive + Play 2 in my car?

Installation requires a standard ISO DIN slot. Connect the power harness, antenna, and speaker wires. Professional installation is recommended.

Why is the display dim or not working?

Check the brightness setting in the menu. If still dim, ensure the vehicle battery voltage is above 11V. If the display remains off, the unit may need service.

How do I update the firmware?

Firmware updates are not available for this model. The software is pre-installed and cannot be updated.

Can I control the Drive + Play 2 from my steering wheel?

No, the Drive + Play 2 does not support steering wheel controls. Use the included rotary controller.

What should I do if no sound comes out?

Check that the volume is not muted. Verify the speaker connections and that the source device is playing. Also ensure the source is selected correctly.

How to clean the Drive + Play 2?

Use a soft, dry cloth to wipe the exterior. Do not use any liquids or cleaning agents.

Is the Drive + Play 2 compatible with Android phones?

It is not directly compatible. Only Apple devices via USB and Aux input for other audio sources.

USER MANUAL Drive + Play 2 HARMAN KARDON

WARNING: Operation of any feature of this device while driving could be dangerous. Always be careful and attentive to your vehicle and the traffic around you. Obey all traffic laws and observe safe driving practices.

Do not connect or disconnect your portable music player or program the Drive + Play 2 system while driving. Always pull off the road and park in a safe position before browsing your portable music player or adjusting the settings on the Drive + Play 2 system.

Do not use headphones while operating any vehicle. The Drive + Play 2 system audio output is not suitable for driving headphones and is intended to output a signal appropriate for an audio system's line-level input jack or FM antenna input.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Important!

Connecting the iPod®

Always hold the Drive + Play 2 system's iPod dock connector by its sides and gently insert (or remove) the dock connector. Never use excessive force to insert or remove the connector, or damage to your iPod may occur.

Lost Data

Harman Kardon is not responsible for any lost data when using the Drive + Play 2 system. Be sure to back up the audio data files on your computer.

About Installation

IMPORTANT: The Drive + Play 2 system should be installed according to these instructions and relevant federal, state or local laws and regulations, which the purchaser should determine prior to installation or use. For safety reasons, do not attempt to disable any safety function incorporated in this device. Any alteration of this device may cause serious injury and shall void the warranty.

Although we recommend professional installation for your Harman Kardon Drive + Play 2 system, this product is also designed for do-it-yourself installation, especially when using the wireless FM transmission method. The enclosed instructions explain how to install the Drive + Play 2 system in a general sense, but they do not show the exact methods for your particular vehicle. After reading this guide, if you feel uncomfortable in performing the necessary steps to install the product, consider asking your car-audio dealer about professional installation options.

Warranty Information

Drive + Play 2 is warranted against defects. The duration of the warranty depends on the laws in the country in which it was purchased. Your local Harman Kardon retailer can help you determine the length of your warranty. To register your product, please visit us at: www.harmankardon.com

Your Package Should Include:

Cigarette Lighter Hub	Display Screen	Adhesive Mounting Pads (2)
Lighter Extension Cable	Display Cable	Alcohol Cleaning Pads (2)
Hard-Wire Power Cable	Display Mounting Base	Mounting Screws (10)
Audio Cable	Wired FM Transmitter Adapter	Hex Keys (1.5mm and 3mm)
USB Adapter	Wireless Control Knob	Quick-Start Guide
iPod Cable	CR2032 Battery	Warranty Card

Quick-Start Guide

Choose the Display Location

The installation of this device between the driver and the windshield or otherwise in any manner that obstructs the driver's clear view of the road or traffic conditions is dangerous and may be prohibited by law. Do not install this device in any manner that impairs the safe operation of the vehicle.

The display should be positioned to eliminate glare and reflections, and should be as close as possible to the driver's normal line of sight, as long as such positioning does not otherwise obstruct the driver's view or impair the safe operation of the vehicle. Do not place device on the vehicle's dashboard unsecured. Do not install this device on any air bag panels or in the deployment field of any air bags. For safety reasons, do not attempt to disable any safety function incorporated in this device. Any alteration of this device may cause serious injury and shall void the warranty.

Quick-Start Guide

Installing the Display

① → ② → ③ → ④

Mounting with Screws Mounting with Adhesive Pad

1 Align mounting plate to location and attach with 3 screws. Make sure the arrow points toward the front of the car.
2 Place display base onto mounting plate and rotate into desired position.
3 Tighten the hex screw to lock the display base onto the mounting plate.

Adhesive Pad

① Insert mounting plate into display base and tighten hex set screw.
② base first, then clean surface of mounting location with supplied alcohol pad.
3 Peel adhesive pad and press display firmly into desired location.

Quick-Start Guide

Installing the Wireless Control Knob ①→②→③→④

graph TD
    A["Install Control Knob Battery\nUse a coin to remove the bottom cover."] --> B["Select Control Knob Mounting Location\nCR2032/DL2032"]
    B --> C["Toward front of car\nUP"]
    C --> D["Mount Control Knob Base\nOrient the base so that the arrow is facing the front of the car.\nYou can either screw the base to the mounting location or use the supplied adhesive pad.\nIf you use the adhesive pad, you must FIRST CLEAN the surface with the supplied alcohol cleaning pad."]
    D --> E["Attach Control Knob to Base\nPush the knob down onto the base, and turn clockwise to lock it into place. The knob can be removed by turning the bottom counterclockwise."]

Connections to the Cigarette Lighter Hub

1 2 3

Audio Output Options

1. If using the built-in wireless FM transmitter, leave the audio output jack empty.
2. To wire directly to your vehicle's antenna, plug the supplied FM Transmitter Adapter into the audio output jack. See diagram on next page.
3. To wire into an AUX input, connect the included audio cable's 3.5mm plug to the audio output jack and then into your vehicle's AUX input.

Quick-Start Guide

Wired FM Transmitter Adapter Connections ①→②→③

Connect in the line between vehicle antenna and radio.

graph TD
    A["Connect FM Transmitter Adapter to Drive + Play 2 System."] --> B["Plug the adapter into the back of radio or FM tuner location."]
    B --> C["Plug the vehicle's antenna into FM Transmitter Adapter."]

If your car's audio system does not provide an auxiliary input and there is no third-party adapter available, use the Drive + Play 2 system's wired FM Antenna Adapter for the best audio performance.

Quick-Start Guide

Using the Control Knob

graph TD
    A["Rotate ring to move the highlight bar on the screen"] --> B["Show Previous Menu (Press and hold to show special features)"]
    B --> C["Previous Press and hold to REWIND"]
    C --> D["Press once to toggle PLAY/PAUSE / /"]
    D --> E["Press and hold for 2 seconds to turn ON/OFF"]
    E --> F["Press to select the highlighted menu item"]

Note - If Drive + Play 2 is turned off with the bottom button it must be turned back on that way!

If the control knob is unresponsive, try pressing the top, center, and right buttons simultaneously for 2 seconds, then turn the outer ring until the highlight bar moves. If the control knob is still unresponsive, try a fresh CR2032-type battery.

Quick-Start Guide 9

iPod® Functions

iPod Connection Confirmation

When your iPod is successfully connected, the iPod icon appears in the top-right corner of the display. "iPod" will also appear as the first menu item.

Playing Music

The Drive + Play 2 system is designed to make navigating the menus on your iPod simple and intuitive. Select menu items using the scroll wheel and press the center button to select.

① Select "iPod" from source menu.

graph TD
    A["iPod"] --> B["Playlists"]
    B --> C["Your iPod Name"]
    C --> D["Name of Song"]

② Browse list and select song.

③ View current selection on the screen.

Quick-Start Guide

Connecting USB Devices

USB Drive Connection Confirmation

The Drive + Play 2 system is compatible with USB Flash Memory devices and other USB devices. For a complete list of compatible devices, please visit www.driveandplay2.com.

When your USB Drive is successfully connected, the USB icon appears in the top-right corner of the display. "USB Drive" will also appear as the first menu item.

Playing Music

If your music files contain ID3 tags, you can browse just like browsing the iPod (see previous page). If no ID3 tags are contained in the files, use the folder structure described below.

1 Select "USB Drive" from source menu.

② Select song.
③ View current selection on the screen.

Quick-Start Guide

Configuring Audio Playback

Wireless FM Transmitter or Wired FM Antenna Adapter

If you use the built-in wireless FM transmitter, no additional wired audio connection is necessary. To use the wired FM Antenna Adapter, you will need to wire it into your vehicle's FM Antenna connection first, then complete these steps. Either way, you must enable and select the FM transmitter frequency to hear audio through your vehicle's FM radio. Remember, you may try several frequencies for the best result.

① Enable the FM Transmitter and Select FM Frequency Preset

Line-Output Audio Connections

To use the Line-Out audio connection, the FM Transmitter must first be disabled using the steps shown. Following that, you will need to connect into your head unit's AUX input. Many vehicles may require a third-party adapter (not included) to provide this type of connection.

① Disable the FM Transmitter

graph LR
    A["Settings System Setting"] --> B["FM Transmitter"]
    B --> C["Enable No"]

Quick-Start Guide

Letter Seek

This feature allows you to quickly browse alphabetically sorted lists, such as Artist, Playlists and Songs in the iPod.

Quick-Start Guide

Automatic Mix

1 2 3 4

Drive + Play 2 system creates channels automatically, and you can refine the channel content during playback. Choose "More like this" to place a higher priority on songs similar to the current selection. Choose "Less like this" to place a lower priority on songs similar to the current selection. Choose "Play something else" to reprioritize selections to something different than the song that's currently playing.

① Select "iPod" and then select "Automatic Mix".

② Browse list and select channel.

3 Press and hold top menu button during Automatic Mix playback to configure content.

④ Configure the channel.

Now your iPod plays the channel. This lets you customize the content.

Quick-Start Guide

"Keep playing" / "Jump to" Options

This feature allows you to continue playing songs from the current artist or album without leaving the "Now Playing" screen.

Keep playing artist

This feature will continue playing the current song, then play the remaining songs by that artist in order.

Jump to artist

This feature will stop playing the current song and begin playing all the songs by that artist in order.

Keep playing album

This feature will continue playing the current song, then begin playing the remaining songs on that album in order.

Jump to album

This feature will stop playing the current song and begin playing all the songs on that album in order.

Troubleshooting

Troubleshoot problems, download updates, and find out about more features at:

www.driveandplay2.com

For customer and technical support, call 516.255.4545

harman/kardon

drive + play ^TM 2

250 Crossways Park Drive, Woodbury, New York 11797

www.harmankardon.com

©2007 Harman International Industries, Incorporated. All rights reserved

Part No. DP2QSGNA001

A Harman International Company

Features, specifications and appearance are subject to change without notice. Screen images may differ from actual product.

Harman Kardon is a registered trademark, and Drive + Play 2 is a trademark, of Harman International Industries, Incorporated.

iPod is a registered trademark of Apple Computer, Inc.

Please Recycle

QSG NA Rev 1.1