SIES-8M-PS-24V-K-10-M8D - Uncategorized Festo - Free user manual and instructions

Product Type	Inductive Proximity Switch for T-Groove
Brand	Festo
Model	SIES-8M-PS-24V-K-10-M8D
Operating Voltage	10...30 VDC (Class 2)
Max Load Current	150 mA
Temperature Range	-25°C to +70°C
Protection Rating	IP65 / IP67
Connector Type	M8D (M8 connector)
Conductor Size	AWG 26 (0.13 mm²)
Overcurrent Protection	1 A maximum (per UL508)
Torque for M8D Connector	Max. 0.3 Nm
Torque for Slot Cover	Max. 0.6 Nm
Included Accessory	Slot Cover ABP-5-S1
Mounting	For T-Groove
Application	Detection of metal parts (e.g., switching lug) in Festo products
Safety Notice	Not to be used as a safety device; switch off voltage before working on electrics
Power Supply Requirement	Use PELV circuits per IEC/DIN EN 60204-1
Standards Compliance	UL508, IEC/DIN EN 60204-1
Certification	Listed IND. CONT. EQ 2MD1
Weight (Approx.)	30 g
Dimensions	Compact design for T-groove mounting
Maintenance	Clean with dry cloth; check cable connections periodically
Spare Parts	Slot Cover ABP-5-S1, M8D Connector
Manufacturer Information	Ruiter Straße 82, 73734 Esslingen, Germany

Frequently Asked Questions - SIES-8M-PS-24V-K-10-M8D Festo

What is the operating voltage range of the Festo SIES-8M-PS-24V-K-10-M8D?

The operating voltage range is 10...30 VDC (Class 2). Ensure the power supply meets Class 2 requirements.

What is the maximum current load?

The maximum load current is 150 mA.

What is the ingress protection rating?

The sensor has an IP rating of IP65/IP67, making it dust-tight and protected against water jets and immersion.

Can this sensor be used as a safety device?

No, this sensor is not a safety device. It must not be used in safety-critical applications. Always switch off voltage before working on electrical connections.

What type of connector does the sensor have?

It has an M8D connector (M8, likely 3-pin). The maximum tightening torque for the connector is 0.3 Nm.

What is the operating temperature range?

The sensor can operate in temperatures from -25°C to +70°C.

What accessories are included with the sensor?

The sensor comes with a slot cover ABP-5-S1. For additional accessories, refer to the Festo catalogue at www.festo.com/catalogue.

How is the sensor mounted?

The sensor is designed for T-groove mounting. It slides into the T-groove of Festo profiles or actuators.

What overcurrent protection is required?

A listed overcurrent protection device is required. For AWG 26 conductor (0.13 mm²), the maximum overcurrent protection rating is 1 A according to UL508.

What is the torque specification for the slot cover?

The slot cover ABP-5-S1 must be tightened to a maximum torque of 0.6 Nm.

USER MANUAL SIES-8M-PS-24V-K-10-M8D Festo

Indactive proximity switch

for T-Groove

Sensor inductivo

para ranura T

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

[phone]

www.festo.com

[Barcode]

IND. CONT. EQ

2MD1

2021-10e

8165469

This product is intended for use in scanning the

position of metal parts (e.g. a switching lug) in Festo

products.

Please select the appropriate accessories from our catalogue www.festo.com/catalogue.

es

The device shall be protected for overcurrent by

a listed overcurrent protection device 24 Vdc.

The ampere rating of the secondary overcurrent

protection shall be in accordance with UL508 Table 211.1 as indicated below.

Conductor size: AWG 26 (0.13 mm²); maximum

ampere rating of overcurrent protection: 1 A

Warnung / Warning / Advertencia

de

Do not use as a safety device!

Switch off voltage prior to working on electrics.

Use power supplies which guarantee reliable

electrical isolation of the operating voltage as per

IEC/DIN EN 60204-1. Consider also the general requirements for PEUV circuits in accordance with

requirements for PELV circuits in accordance with

IEC/DIN 60204-1.

es

10...30 VDC, Class 2

Max. 150 mA
-25...+70°C
IP 65 / IP 67

max. 0.6 Nm

Nutabdeckung ABP-5-S1

Slot cover ABP-5-S1

Tapa de la ranura ABP-5-S1