SOH 4007BE - Heating SENCOR - Free user manual and instructions

Product Type	Electric Fan Heater
Brand	Sencor
Model	SOH 4007BE
Heating Power	2000 W (max)
Power Settings	2 heat levels (1000 W / 2000 W) + fan only
Thermostat	Adjustable thermostat
Fan Speeds	2 speeds
Oscillation	Yes, 70°
Safety Features	Overheat protection, tip-over switch
Housing Material	Plastic
Dimensions (W x D x H)	22 cm x 18 cm x 30 cm
Weight	1.5 kg
Power Supply	220-240 V ~ 50 Hz
Power Cord Length	1.5 m
Noise Level	~45 dB (low speed)
Heating Element	PTC ceramic
Remote Control	No
Timer	No
LED Display	No
Overheat Protection	Yes
Tip-over Switch	Yes
Cleaning	Wipe with dry cloth; do not immerse in water
Storage	Store in cool, dry place

Frequently Asked Questions - SOH 4007BE SENCOR

How do I clean the Sencor SOH 4007BE heater?

Before cleaning, unplug the heater and allow it to cool down. Use a soft, dry cloth to wipe the exterior. Do not use water or chemical cleaners. The air intake and outlet grilles can be cleaned with a vacuum cleaner to remove dust.

Can I use the heater in a bathroom?

No, the SOH 4007BE is not designed for bathroom use. It is intended for indoor use in dry areas only. Avoid using it near water or in high humidity environments.

What should I do if the heater stops working?

First, check if it is properly plugged in and the power outlet is working. If the heater has an overheat protection feature, let it cool down and then try restarting. If it still does not work, contact Sencor customer support.

How do I set the thermostat on the SOH 4007BE?

Turn the thermostat knob to the desired temperature setting. The heater will automatically maintain that temperature by cycling on and off. Turn the knob to the minimum to lower the temperature or to the maximum for continuous heating.

Does the heater have a timer?

No, the Sencor SOH 4007BE does not feature a built-in timer. You can use an external plug timer if needed.

What is the maximum power consumption of the SOH 4007BE?

The maximum power consumption is 2000 W on the highest setting. At the lower setting, it consumes about 1000 W. Always ensure the electrical circuit can handle the load.

Can I leave the heater unattended?

It is not recommended to leave the heater unattended for long periods. Although it has safety features like tip-over and overheat protection, always turn it off when leaving the room or sleeping.

How do I switch between fan and heat?

Use the function switch: set it to the fan symbol for cool air only, or to one of the two heat symbols for low or high heat. The heater will blow air at the selected temperature.

Why does the heater sometimes turn off by itself?

This is likely due to the overheat protection feature. If the heater gets too hot, it automatically shuts off. Allow it to cool down for 10-15 minutes, then try again. Ensure air vents are not blocked.

Is the SOH 4007BE suitable for large rooms?

The heater is designed for small to medium-sized rooms (up to about 20 m²). For larger spaces, consider a higher-output model or use supplementary heating.

USER MANUAL SOH 4007BE SENCOR

Exterior view of a SEICOR heat exchanger with vertical slats and control panel (no text or symbols visible on device body)

SENCOR®

SOH 4007BE / SOH 4009BE