SHP 100 - Beard trimmer SENCOR - Free user manual and instructions
Find the device manual for free SHP 100 SENCOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Sencor |
| Model | SHP 100 |
| Product Type | Beard trimmer |
| Dimensions (approx.) | 16 cm x 4 cm x 3 cm |
| Weight (approx.) | 200 g |
| Power Source | Rechargeable battery (built-in) |
| Charging Time | Approximately 8 hours |
| Operating Time | Up to 45 minutes |
| Blade Material | Stainless steel |
| Cutting Lengths | Adjustable with comb attachments |
| Thinning Function | Yes, built-in thinning lever |
| Washable | Yes, detachable head for rinsing |
| Accessories Included | Comb attachments, cleaning brush, charging cable |
| LED Indicator | Yes, for charging status |
| Safety Features | Rounded blade tips, auto shut-off |
| Repairability | Blade replacement possible |
| Manual Languages | English (others via request) |
Frequently Asked Questions - SHP 100 SENCOR
How do I adjust the cutting length?
Attach the desired comb attachment to the blade. Slide the attachment onto the blade until it clicks. The comb height determines the cutting length; use the included comb set for different lengths.
Can I use the trimmer while charging?
It is recommended to use the trimmer only when fully charged or during corded operation if supported. Check the manual for your specific model; typically, cordless use is advised to avoid damage.
How long does the battery last?
After a full charge (approx. 8 hours), the trimmer provides up to 45 minutes of continuous use. Actual battery life may vary based on usage and beard thickness.
Is the blade washable?
Yes, the detachable head can be rinsed under running water. Make sure to remove the head from the body before washing. Dry thoroughly before reassembling.
How do I clean the trimmer?
Remove the blade assembly and rinse it under warm water. Use the included cleaning brush to remove hair clippings. Lubricate the blades with a drop of oil every few months.
What does the thinning function do?
The thinning lever allows you to control the thickness of the beard by adjusting the blade gap. Push the lever up for a thinner, more natural finish.
Can I replace the blade?
Yes, replacement blades are available. Contact Sencor customer service or check the product page for compatible replacement parts. Ensure the trimmer is off before replacing.
Why is the trimmer not turning on?
First, check if the battery is charged. Connect the charging cable and look for the LED indicator. If it still doesn't work, try pressing the power button for 3 seconds. If the issue persists, contact support.
Are there any safety precautions?
Do not use the trimmer with wet hands or near water. Keep it out of reach of children. If the blade is damaged, stop using and replace it. Avoid pulling the hair when trimming.
Where can I find the full manual?
The user manual is available for free download at notice-facile.com under the Sencor SHP 100 product page. You can also request a translation via email.
User questions about SHP 100 SENCOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beard trimmer in PDF format for free! Find your manual SHP 100 - SENCOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SHP 100 by SENCOR.
USER MANUAL SHP 100 SENCOR
SENCOR®
SHP 100
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SENCOR
Model : SHP 100
Category : Beard trimmer