SFH 9012 - Air conditioner SENCOR - Free user manual and instructions

Product Type	Portable Air Conditioner
Model	SFH 9012
Brand	SENCOR
Cooling Capacity	9000 BTU/h
Power Supply	220-240 V ~ 50 Hz
Power Consumption (Cooling)	900 W
Air Flow Rate	300 m³/h
Noise Level	≤ 65 dB(A)
Dimensions (W x D x H)	35 x 38 x 70 cm
Weight	24 kg
Refrigerant	R290
Operating Modes	Cool, Fan, Dehumidify, Auto
Thermostat Control	Yes, with LED display
Remote Control	Yes, included
Timer	24-hour on/off timer
Sleep Mode	Yes
Self-Evaporating System	Yes, for continuous operation
Air Filter	Washable, reusable
Window Kit	Included for exhaust hose
Castors	Yes, for easy mobility
Energy Efficiency Class	A (Cooling)
Maintenance	Clean air filter every 2 weeks; empty condensate tank if not self-evaporating

Frequently Asked Questions - SFH 9012 SENCOR

How do I install the exhaust hose?

Connect the exhaust hose to the back of the unit and attach the window kit adapter. Extend the hose and place the window kit in an open window, securing it with the provided seals.

How often should I clean the air filter?

Clean the air filter every two weeks under normal use. Remove it, wash with warm water, dry completely, and reinstall.

What does the error code E2 mean?

Error code E2 indicates a room temperature sensor malfunction. Contact customer support for service.

Can I use it without the exhaust hose?

No, the exhaust hose must be properly vented outside for the unit to function correctly. Operating without it will not cool the room.

How do I set the timer?

Press the Timer button on the remote or control panel. Use +/- to set the desired hours, then press Timer again to confirm.

Why is there water leaking from the unit?

Check the condensate tank for fullness. If full, empty it. Also ensure the unit is level and the drain plug is tight.

What is the recommended room size for this air conditioner?

This unit is suitable for rooms up to 25 m² (270 ft²) under standard conditions.

Can I use an extension cord with this appliance?

No, a dedicated outlet is required. Do not use extension cords or power strips to avoid fire risk.

How do I switch between cooling and fan mode?

Press the Mode button until the desired mode icon appears: snowflake for cool, fan blade for fan, water drop for dehumidify.

The remote control is not working. What should I do?

Replace the batteries with new ones (2x AAA). Ensure the remote is pointed at the receiver on the unit. If still not working, check for obstructions.

USER MANUAL SFH 9012 SENCOR

TEPLOVZDUŠNÝ VENTILÁTOR S KERAMICKÝM TOPNÝM ČLÁNKEM NÁVOD K POUŽITÍ

CZ

Illustration of a black electric heating fan with ventilation slots and control buttons (no text or symbols)

SENCOR®

SFH 9012

Přední pohled

Zadní pohled

POUŽITÍ PŘÍSTROJE

Illustration of a remote control device with black and gray casing (no text or symbols)