BH1081-005 - Uncategorized DEDRA - Free user manual and instructions

Type of Product	Half-Mask Respirator
Brand	DEDRA
Model	BH1081-005
Dimensions (approx.)	120 x 80 x 60 mm
Weight	100 g
Protection Type	Against dust and particles
Filter Type	Replaceable particle filter
Material	Soft silicone facepiece, plastic harness
Adjustable Straps	Yes, elastic with buckles
Exhalation Valve	Yes, to reduce heat and moisture buildup
Inhalation Valve	Yes, one-way
Maximum Use Time (per use)	8 hours (recommended)
Operating Temperature	-10°C to +40°C
Storage Conditions	Dry, clean environment
Maintenance	Clean with mild soap and water; air dry
Filter Replacement Indicator	When breathing resistance increases
Safety Standards	Compliant with EN 149:2001
Spare Parts Available	Yes, replacement filters and straps
Repairability	Filters replaceable; facepiece washable
Intended Use	Non-toxic dust and particulate protection
Not Suitable For	Gases, vapors, oxygen-deficient atmospheres
Package Includes	Half-mask respirator, 2 filters, user manual

Frequently Asked Questions - BH1081-005 DEDRA

What does the DEDRA BH1081-005 protect against?

The BH1081-005 is a half-mask respirator designed to protect against non-toxic dust and particles. It is not suitable for gases, vapors, or oxygen-deficient atmospheres.

How do I replace the filters on the BH1081-005?

Turn the mask over, locate the filter clips on each side, press the release tab, remove old filters, and snap new ones into place. Ensure a tight seal to maintain protection efficiency.

How often should I replace the filters?

Replace filters when you notice increased breathing resistance, visible damage, or if the mask becomes difficult to breathe through. Under normal use, filters may last 40 hours or until clogged.

Can I clean the DEDRA BH1081-005 mask?

Yes, clean the facepiece with mild soap and warm water, rinse thoroughly, and air dry. Do not use solvents or abrasive cleaners. The filters cannot be cleaned and must be replaced.

Is the BH1081-005 suitable for medical use?

No, this mask is not certified for medical or surgical use. It is intended for industrial and DIY applications to protect against non-hazardous particulates.

How do I ensure a proper fit?

Adjust the elastic straps to achieve a snug but comfortable fit. Perform a user seal check by covering the exhalation valve and breathing out; the mask should bulge slightly without leaking.

Can I use this mask for painting?

Only if the paint does not contain solvent-based vapors. The BH1081-005 filters only particulates; for paint fumes, use a combination filter respirator.

What is the storage life of the filters?

Unopened filters have a shelf life of 5 years if stored in a cool, dry place. Once opened, use within 6 months or as indicated by the filter's condition.

Does the BH1081-005 have an exhalation valve?

Yes, it features a built-in exhalation valve that reduces heat and moisture buildup, making breathing easier during prolonged use.

Where can I find spare parts for this mask?

Replacement filters and straps can be purchased from DEDRA authorized dealers or online retailers. Search for 'DEDRA BH1081-005 filter replacement'.

USER MANUAL BH1081-005 DEDRA

bojājuma risks. Olo: Bītān instādājumu sīn Tīs āmīlātā bērdu Tām tāc kān lāc kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān kān