SRD 1000SCL GR - Radio SENCOR - Free user manual and instructions
Find the device manual for free SRD 1000SCL GR SENCOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable FM/AM Radio with Alarm Clock |
| Brand | Sencor |
| Model | SRD 1000SCL GR |
| Color | Gray |
| Radio Bands | FM (88–108 MHz), AM (530–1710 kHz) |
| Preset Stations | 20 FM + 20 AM |
| Display | LCD with clock and alarm indicators |
| Alarm Functions | Dual alarm with wake-up radio, buzzer, or alarm |
| Snooze | Yes, 9-minute snooze |
| Sleep Timer | Yes (10-90 minutes) |
| Power Supply | AC 230V ~50Hz or 4 x UM-2 (C) batteries (not included) |
| Power Consumption | 8 W (AC operation) |
| Dimensions (W x H x D) | 200 x 130 x 80 mm |
| Weight | 0.8 kg (without batteries) |
| Speaker | Built-in monaural speaker, 8 ohm, 2 W |
| Headphone Jack | 3.5 mm stereo |
| Antenna | FM telescopic, AM built-in ferrite |
| Battery Backup | Retains clock and alarm settings during power outage |
| Cleaning | Wipe with soft dry cloth; do not use abrasive cleaners |
| Spare Parts | Contact authorized service center for replacement parts |
| Safety Warnings | Keep away from water; never disassemble; use only specified power source |
Frequently Asked Questions - SRD 1000SCL GR SENCOR
How do I set the clock on the Sencor SRD 1000SCL GR?
Press and hold the Clock button until the hour digits flash. Use the + and - buttons to set the hour, press Clock again to set minutes, then adjust and press Clock to confirm.
Can I use batteries in this radio?
Yes, you can power the SRD 1000SCL GR with 4 C-size (UM-2) batteries (not included). Note that the backlight will not work on battery power to conserve energy.
How do I set an alarm?
Press the Alarm 1 or Alarm 2 button. Set the alarm time using the +/- buttons. Choose the alarm mode (radio, buzzer, or alarm) by pressing the Mode button. Confirm by pressing Alarm again.
Why is the radio not receiving any stations?
Ensure the FM antenna is fully extended. For AM, rotate the unit to improve reception. Check if the volume is turned up and that the band selector is set correctly. If using batteries, ensure they are fresh.
How do I preset radio stations?
Tune to the desired station manually, then press and hold a Preset button (e.g., P+) for 3 seconds until you hear a beep. Repeat for up to 20 FM and 20 AM presets.
Does this radio have a sleep timer?
Yes, press the Sleep button repeatedly to set the timer from 10 to 90 minutes (in 10-minute steps). The radio will automatically turn off after the set time.
How do I clean the radio?
Disconnect the power and remove batteries. Wipe the exterior with a soft, dry cloth. Do not use liquid or abrasive cleaners. Do not let moisture enter the device.
Can I use headphones?
Yes, plug 3.5 mm headphones into the jack on the side. When headphones are connected, the built-in speaker is muted.
What does the 'GR' in the model name stand for?
'GR' typically indicates the color variant: Gray. Different colors may be available in the same series.
How do I replace the backup battery for the clock?
The SRD 1000SCL GR does not use a separate backup battery; it uses a capacitor that stores charge for a short period (about 10 minutes) when the main power is disconnected. Do not attempt to replace it.
User questions about SRD 1000SCL GR SENCOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Radio in PDF format for free! Find your manual SRD 1000SCL GR - SENCOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SRD 1000SCL GR by SENCOR.
USER MANUAL SRD 1000SCL GR SENCOR
EN ■ User Manual