AU3665 - Hand blender AURORA - Free user manual and instructions

Product Type	Hand Blender
Brand	Aurora
Model	AU3665
Voltage	220-240 V
Frequency	50/60 Hz
Power Rating	600 W
Speed Settings	2 speeds + turbo
Shaft Material	Stainless steel
Body Material	Plastic (ABS)
Cord Length	1.2 m
Weight	0.8 kg
Dimensions (H x W x D)	38 x 6 x 6 cm
Functions	Blending, pureeing, mixing
Cleaning Method	Detachable shaft; hand wash recommended
Safety Features	Overheat protection, automatic shut-off
Accessories Included	Blending beaker, whisk attachment
Warranty	2 years
Color	Silver/Black
Noise Level	Approx. 80 dB
Dishwasher Safe Parts	Blending shaft only

Frequently Asked Questions - AU3665 AURORA

How do I use the Aurora AU3665 hand blender?

Insert the shaft into the motor unit until it clicks. Submerge the shaft in the ingredients, hold the blender vertically, and press the desired speed button. Use short pulses for best results.

How should I clean the hand blender?

Detach the shaft from the motor unit after unplugging. Rinse the shaft under running water or wash it with mild soap. Wipe the motor unit with a damp cloth. Do not immerse the motor unit in water.

Can I crush ice with this blender?

No, the AU3665 is not designed for crushing ice. It is intended for blending soft fruits, soups, sauces, and similar tasks.

Can I blend hot liquids?

Yes, but let hot liquids cool slightly before blending (below 80°C). Avoid overfilling the beaker and use the turbo function in short bursts to prevent splashing.

How can I prevent splashing while blending?

Start at low speed and gradually increase. Keep the blender fully submerged before activating. For small quantities, tilt the beaker slightly to create a vortex.

What is the maximum continuous operating time?

Do not operate the blender continuously for more than 1 minute. Allow it to cool for at least 2 minutes between uses to prevent overheating.

Can I use the hand blender for kneading dough?

No, this blender is not suitable for dough. Use it only for blending, pureeing, and mixing thin to medium-thick mixtures.

How should I store the hand blender?

Store the hand blender in a dry place. You can hang it using the cord or store it in a drawer with the shaft detached. Avoid direct sunlight.

What if the blender stops working suddenly?

Check if the motor unit is properly clicked onto the shaft. Ensure the appliance is plugged in and the outlet works. If it still doesn't work, let it cool for 15 minutes; it may have triggered the overheat protection.

Is the shaft interchangeable with other models?

The shaft is designed specifically for the AU3665. Using shafts from other models is not recommended and may cause poor performance or damage.

USER MANUAL AU3665 AURORA

White Aurora brand brush with black handle and metal stand (no visible text or symbols)

Electric

Hand Blender

1. Speed mode "l"
2. Motor block
3. Nozzle-blender

Please read this manual carefully before using the product to avoid damage during use. Before switching on the product, make sure that the technical specifications of the product shown on the label correspond to the parameters of the electric network. Incorrect use can lead to damage of the product, cause material damage or cause damage to the health of the user. Use only for household purposes in accordance with this Manual. The product is not intended for commercial use. Use the product only for its intended purpose. Do not use the product near the kitchen sink, outdoors and in rooms with high humidity. Always unplug the product from the electrical network when it is not in use, as well as before assembly, disassembly and cleaning. The product must not be unattended while it is connected to the electric network. Make sure that the power cord does not touch the sharp edges of furniture and hot surfaces. To avoid electric shock, do not attempt to disassemble or repair the product by yourself. When disconnecting the product from the electric network, do not pull on the power cord, hold the plug. Do not twist or wind the cord. The product is not designed to be operated by an external timer or a separate remote control system. The product is not intended for use by persons with reduced physical, sensory or mental abilities, or if they have no experience or knowledge, if they are not controlled or instructed about the use of the device by the person responsible for their safety. Do not allow children to use the product as a toy. Do not use accessories that are not included in the delivery suite. ATTENTION! Do not allow children to play with plastic bags or wrapping film. THREAT OF SUFFOCATION! ATTENTION! Do not use this product outdoors. ATTENTION! Be especially careful if children under 8 years or people with disabilities are close to the product in use. ATTENTION! Do not use this product near combustible materials, explosives, or self-igniting gases. Do not install this product near a gas or electric stove, or other heat sources. Do not expose the product to direct sunlight. ATTENTION! Do not allow children under 8 years to touch the kettle body, the power cord and the plug of the power cord while the product is in operation. If the product has been kept for a while at a temperature below 0°C, it must be left at room temperature for at least 2 hours before switching it on. When connecting the product to an electrical network do not use an adapter. ATTENTION! To avoid overloading the electric network, do not connect the product with other powerful electrical appliances to the same electric network. ATTENTION! The maximum temperature of the products for processing should not exceed 40 °C. ATTENTION! To avoid overheating, do not use the product for more than 30 seconds, and always take a break for at least 2 minutes. ATTENTION! If it is difficult to rotate the knife-shredder, disconnect the appliance from the mains and only after that it is possible to extract the ingredients that interfere with the rotation of the knife. ATTENTION! Do not touch the motor housing, the power cord, or the power plug with wet hands. At the end of work, before removing the food and attachment from the bowl, disconnect the motor unit from the mains and wait until the motor stops completely. To avoid electric shock and fire, do not immerse the motor and power cord in water or other liquids and do not wash the motor part under running water. If this happens, immediately unplug the product from the mains and, before using it in the future, check the operation and safety of the product in an authorized service center. ATTENTION! Do not remove the nozzles during operation. In order not to damage the blades, do not process very hard foods such as cereals, rice, seasonings, coffee beans, ice, hard cheeses, frozen foods. If working with the nozzle is difficult, add a small amount of water. Before starting the grinding / mixing process, it is recommended to peel the fruit from the peel, remove inedible parts, bones, and cut the products in cubes about 1.5x1.5 cm in size. ATTENTION! Cutting blades are very sharp and are dangerous. Handle them with extreme caution! ATTENTION! Do not touch the rotating parts of the product. ATTENTION! For additional protection in the power circuit, it is advisable to install a residual current device with a rated operating current not exceeding 30 mA. To install the device, contact a specialist.

PREPARATION FOR WORK

Unpack the product and remove any packing material. Wipe the case and all accessories carefully with a soft, slightly damp cloth. After that, wipe them dry.

WORK

NOZZLE-BLENDER

The blender nozzle is suitable for making soups, mashed potatoes, various sauces and gravy, as well as baby food, mixing various cocktails. Install the nozzle in the engine block and secure it. Make sure that the product is assembled properly. Connect the motor unit to the mains. To avoid splashing the mixture, before immersion, immerse the nozzle in products that need to be processed. To turn on the device, press and hold the "I". This mode of operation is suitable for the joint treatment of liquid and solid products.

CLEANING AND MAINTENANCE

Before cleaning, disconnect the product from the mains. Make sure the motor is fully stopped. To clean the engine block, use a slightly damp cloth, then wipe it dry. Wash all nozzles and containers with warm soapy water, then wipe dry with a clean towel. Do not soak the nozzles for long in the water. Do not use the dishwasher to clean the attachments. Do not use hard jaws, abrasive cleaners or solvents for cleaning.

STORAGE

Before storage, make sure that the product is disconnected from electric network. Complete all the requirements of the CLEANING AND MAINTENANCE section. Keep the product in a dry, cool place and out of the reach of children

This symbol on the product and packaging means that used electrical and electronic products, as well as batteries, should not be disposed of with household waste. They need to be taken to specialized reception points. For more information on existing waste collection systems, contact your local authorities. Correct disposal will help to save valuable resources and prevent possible negative impact on human health and the state of the environment that may result from improper handling of waste.

МЕРЫ БЕЗОПАСНОСТИ