17-090 - Glue gun NEO tools - Free user manual and instructions

Product Type	Hot Melt Glue Gun
Brand	NEO tools
Model	17-090
Power Source	AC mains (standard household outlet)
Heating Temperature	Up to 200°C
Preheat Time	3-5 minutes
Glue Stick Feed	Trigger-operated
Nozzle Type	Standard straight nozzle
Safety Stand	Includes safety stand holder for stationary use
Power Indicator	LED indicator when power is on
Operation	Pull trigger to release melted glue
Bonding Time	Apply within 30 seconds after melting
Curing Time	Press objects together for 5 minutes
Backflow Prevention	Clean nozzle to prevent backflow
Cleaning	Use a needle to clear nozzle blockages
Glue Stick Replacement	Insert new stick to push remaining
Safety Warning	Do not touch nozzle during operation
Usage Environment	Avoid high humidity; keep away from children
Disposal	Do not dispose with household waste; recycle properly
User Manual	Available for download in PDF

Frequently Asked Questions - 17-090 NEO tools

How long does it take for the glue gun to preheat?

The glue gun requires a preheat time of 3 to 5 minutes before use.

What should I do if no glue comes out of the nozzle?

First, check that the power cord is properly plugged in and the gun is heating. If it is heating, clean the nozzle with a needle to remove any blockage. If the problem persists, refer to the backflow prevention steps.

How do I replace the glue stick?

When the glue stick becomes short, insert a new glue stick into the glue stick hold port to push the remaining stick forward.

What is the maximum temperature of the glue gun?

The heating nozzle can reach temperatures up to 200°C during operation.

Can I use the glue gun on fabric?

Yes, the glue gun is suitable for bonding materials such as wood, plastic, and fabric. Apply the melted glue within 30 seconds and press together for 5 minutes.

How do I clean the nozzle?

If the nozzle becomes blocked, use a needle to clean the clogged area. Ensure the nozzle and glue sticks are clean to prevent impurities.

Is it safe for children to use this glue gun?

Children aged 8 or above can use the device under adult supervision. Do not allow children to play with the equipment, and keep it away from young children.

How can I prevent glue backflow?

To prevent backflow, keep the nozzle and glue sticks clean. Stop using the gun immediately if backflow occurs and clear the nozzle clog.

Can I leave the glue gun plugged in when not in use?

If you plan to stop operation, switch off or unplug the glue gun 5-10 minutes in advance to prevent continuous melting. Always unplug when not in use.

What materials can be bonded with this glue gun?

The glue gun can bond various materials including wood, plastic, fabric, and more. It is ideal for crafts and light repairs.

USER MANUAL 17-090 NEO tools

EN Instructions:

Glue guns 17-090,17-095,17-096,17-097,17-100

1. Please make sure that the cable is safe and not damaged and the nozzle and the glue stick are clean before use.
2. Operation steps

• Install the safety stand holder securely.
- Insert the glue stick into the glue stick hold port.
- Plug in the power and switch it on, then the power indication will light on.
• Preheat the gun 3 to 5 minutes.
- Pull the trigger to release the melted glue on the surface of the objects, and then glue together the separate objects in 30 seconds.
- Keep the objects pressing each other about 5 minutes and then let the meted glue dry and cool down. Then it's done.

1. When the glue stick is inserted into the glue stick hold port and becomes shorter, please insert a new glue stick to push the remaining glue stick.

Trouble shooting:

Trouble	Solution
There is no glue coming out from the nozzle.	The gun is not heating.If the power socked is not plugged well, please plug it again. If the gun doesn't work, please contacts us.
	The gun is heating.If there is some blockage inside the nozzle, use a needle to clean the clogged area. If some backflow happens, please follow the steps mentioned in the section “Backflow problem” below.
	The glue stick can't move forward to be melted.Please insert a new glue stick to push the remaining stick.
Backflow problem	The nozzle and the glue stick need to be clean.Stop using the glue gun immediately and clear out the clogged area of the nozzle.
	Prevention tips.
	Keep the glue sticks clean to avoid impurity or blockade in the nozzle.
How to save the glue	Controlling the trigger.The harder you press the trigger, the more the glue stick will be melted and released.Just press the trigger moderately during the operation.
	Stop continuously pressing trigger or switch off and unplug the glue gun.If you plan to stop the operation, pleases switch off or unplug the glue gin 5 – 10 mins in advance so that it won’t continuously melt the glue stick.
How to ensure safety	Don’t pull out the remaining glue stick during or after using the device.
	If you don’t use this device, unplug it from the power outlet and don’t try to recycle the used or melted glue stick.
	The heating nozzle can produce heat up to 200°C during the operation.Please avoid touching this area, and only hold the gun handle.
	To avoid electric shock during the operation, don’t use this device in high humidity environment. Keep the device away from children or make sure that children use it under adults’ guidance.
	Don’t disassemble the glue gun in any case.

WARNING! This device can be used by children aged 8 or

above and by people with limited physical, mental or sensory abilities, or by people without experience and knowledge, if they are supervised or were given the instructions of proper device operation, and understand the risk. Children can not play with equipment. Children can not clean and maintain the device without supervision

ENVIROMENTAL PROTECTION

Do not dispose of electrically powered products with household wastes, they should be utilized in proper plants. Obtain information on waste utilization from your seller or local authorities. Used up electric and electronic equipment contains substances active in natural environment. Unrecycled equipment constitutes a potential risk for environment and human health.

"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes, drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later amendments). Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of Grupa Topex are strictly forbidden and may cause civil and legal liability.

RU Инструкции: