SWS TH4100 - Weather Station SENCOR - Free user manual and instructions

Product Type	Wireless Weather Station
Model	SWS TH4100
Brand	Sencor
Temperature Measurement Range	-9.9°C to 50.0°C
Humidity Measurement Range	20% to 95% RH
Wireless Transmission Frequency	433.92 MHz
Transmission Range (Open Area)	Up to 50 meters
Number of Remote Channels	3
Power Supply (Base Station)	2 x AAA batteries (not included)
Display Type	LCD with LED backlight
Low Battery Indicator	Yes, on base station
Main Functions	Indoor/outdoor temperature and humidity, time/date, alarm, channel selection
Cleaning Instructions	Wipe with a dry, soft cloth. Do not use solvents or abrasive cleaners.
Safety Precautions	Keep away from water and extreme heat. Do not disassemble.
Dimensions (Approx.)	100 x 100 x 20 mm
Weight (Approx.)	100 g
Compliance	CE

Frequently Asked Questions - SWS TH4100 SENCOR

How do I set up the Sencor SWS TH4100 weather station?

Insert batteries into the base station and remote sensor. Press the reset button if needed. The base station will automatically search for the sensor signal. Ensure the sensor is within 50 meters in open area.

How do I change the batteries?

Open the battery compartment on the back of the unit. Replace with 2 new AAA batteries for the base station and 2 AAA for the remote sensor. Observe polarity.

How can I switch between channels?

Press the 'CH' button on the base station to cycle through Channel 1, 2, or 3. Each remote sensor must be set to a different channel via a slide switch.

What does the low battery indicator mean?

When the low battery icon appears on the display, it indicates that the batteries in the base station or remote sensor are low. Replace them promptly to ensure accurate readings.

Why is my weather station not receiving signals from the remote sensor?

Check that the sensor is within range (50m open area). Ensure batteries are fresh and installed correctly. Try resetting both units. Avoid placing near metal objects or electronic interference.

How do I reset the weather station?

Locate the small reset button on the base station. Use a paperclip to press and hold for 2 seconds. This will clear all settings and re-sync with sensors.

What is the accuracy of temperature and humidity readings?

The temperature accuracy is typically ±1°C and humidity accuracy is ±5%. For precise measurements, place the sensor in a shaded, ventilated area.

Can I add extra remote sensors?

Yes, the base station supports up to 3 channels. You can purchase additional Sencor compatible sensors and assign each to a different channel.

How should I clean the weather station?

Use a soft, dry cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Avoid getting moisture into the openings.

How do I dispose of this product properly?

Do not dispose of with household waste. Follow local regulations for electronic waste. The product should be taken to a recycling center for electrical and electronic equipment.

USER MANUAL SWS TH4100 SENCOR

1. LED light

2. Battery comparison

3. Hanging hole

4. Channel shift

5. Bone hanging hole

6. Hope hugging man

SENCOR

SWS TH4100

BEZDRÁTOVÝ SNÍMAČ

- Humidity Range: 20%-95%, Resolution 1%

- Low voltage indication

- 3 channels max - Channel Shift, push to switch from Channel 1, Channel 2, Channel 3

- LED light flash during transmitting

- Waterproofing for daily use, lever: IP54.

- Power by 2*AA batteries

LOW BATTERY INDICATOR

The sensor will send signal to main unit.

We recommend to use alkaline dry battery, instead of rechargeable batteries.

Before power on, please push the channel shift to chose the channel you desire. If only 1 channel, we recommend you

to stay channel 1

POWER ON OR RESET

After Power on, the sensor will detect temperature and humidity data immediately, then the red led light will flash, and

sending out signal.

433,92 MHZ RECEPTION CHECK

The transmission range is about 50 meters from the transmitter to the thermometer (in open area). The main unit

should receive the temperature data with 3 minutes after set-up

Transmitting cycle: CH1: 114S, CH2: 134S, CH3: 158S

If the temperature data is not received 3 minutes after setting up, please check:

Funkce

- Rozsah teploty: -40 °C - +60 °C. Rozlišeni 0.1 °C

a certain to sign in

KONTROLA PRIJMU SIGNALU 433,92 MHz

1. The distance of main unit and transmitter should be at least 5\~6.5 feet (1.5\~2 meters) away from any interfering

sources such as computer monitors or TV sets.

1. Avoid positioning the thermometer onto or in the immediate proximity of metal window frames.

2. Using other electrical products such as headshone commandor operation on the same signal from

3. Using other electrical products such as headphones or speakers operating on the same signal frequency.

4. Nucleosyn electrical devices operating on the same signal frequency can also serve interference.

5. Neighbors sing electrical devices operating on the same signal frequency can also cause interference.

POSITION METHOD

The sensor can be placed in bellow 3 ways.

A. Put on flat area directly

B. Hang on wall by hanging hole with a nail.

C. Hang with a rope with Rope hanging hole

PRECAUTIONS

- Do not clean any part of the product with benzene, thinner or other solvent chemicals. When necessary, clean it

with a soft cloth.

- Never immerse the product in water. This will damage the product.

- Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity.

- Do not tamper with the internal components.

- Do not mix new and old batteries or batteries of different types.

- Do not mix alkaline, standard or rechargeable batteries with this product.

- Remove the batteries if storing this product for a long period of time.

- Do not dispose of this

treatment is necessary.

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS

Dispose of packaging material at a public waste disposal site.

B. 29, 2013. 15: 24:37:37, 1986

BIZTONSAGI INTEZREDESEK

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be

treated as household waste.

,

Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to

your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable

natural resources and help in preventing the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste

could be caused as a result of improper liquidation or waste. Please ask your local authorities of the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations

for fi

For business entities in the European Union

If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.

Disposal in other countries outside the European Union

If you wish to dispose of this product, request the necessary information about the correct disposal method from local

government departments or from your seller

cc

CE The product meets EO requirements.

11

Hereby, FAST CR, a.s. declares that the radio equipment type SWS TH4100 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

www.sencor.com

Changes to the text, design and technical specifications may of these changes. The original version is the first large

these changes. The original version is in the Czech language.

Address of the manufacturer: FAST CR, S.S., U Sanitasu 1621, Ricany CZ-25101

LIKVIDACE VYŘAZENÝCH ELEKTRICKÝCH A ELEKTRONICKÝCH ZAŘÍZENÍ

1. The following table includes the following table:

EN Warranty conditions

Warranty card is not a part of the device packaging.

This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty is limited to the following conditions. Warranty is referred only to the customer goods using for common domestic use. The claim for service can be applied either at dealer's shop where the product was bought, or at below mentioned authorized service shops. The end-user is obligated to set up a claim immediately when the defects appeared but only till the end of warranty period. The end user is obligated to cooperate to certify the claiming defects. Only completed and claim according to hygienic standardised product will be accepted. In case of eligible warranty claim the warranty period will be prolonged by the period from the date of claim application till the date of taking over the product; buy-end-user, or the date the end-user is obligated to take it over. To obtain the service under this warranty, end-user is obligated to certify his claim with daily completed following documents: receipt, certificate of warranty, certificate of installation.

This warranty is void especially if apply as follows:

■ Defects which were put on sale.

■ 'Weer-out or damage caused by

■ The product was damaged by Unprofessional or wrong installation, used in contrary to the applicable instruction manual, used in contrary to legal enactment and common process of use or used for another

purpose which has been designed for.

■ The product was damaged by uncared-for or insufficient maintenance. ■ The product was damaged by did not end of leave, maintain and

■ The product risks damaged by diff, accident or force majeure of natural diseases, fire, and dust. ■ Defects on functionality caused by low quality of signal, electrodynamic field interference etc

■ The product was mechanically damaged (e.g. broken button, fall).

■ Damage caused by use of unsuitable medio, fillings, expendable supplies (batteries) or by unsuitable

working conditions (e.g. high temperatures, high humidity, quakes ■ Repair, modification or other failure action to the product by upout

■ End-user did not prove enough his right to claim time and place of purchase.

■ Data on presented documents differs from data on products.

■ Cases when the claiming product cannot be identified according to the presented documents (e.g. the social number or the usually real has been damaged).

SCHA NUMBER OF THE WORING SEA HAS BEEN DAMAGED

Manufactures:

FAST ČR, a.s., U Senitasu 1621, Řitany 251 Of. Czech Republic

) Visit WWW.ARDOC.COM [by detailed information about authorized service rights

1. www.elelie.com.cn

The original version of the instructions is in the Czech language, other language versions are made by the

appropriate translation.

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

indiskolt volt. 7. Indicate the utility rate (command, month - 100% following will be in mind - 30%

11.07.2023, 45, 140 points, 638 points, 607 points, 564 points, 47 points, 45 points, 39 points