EGS-01-4W - Repellent Emos - Free user manual and instructions
Find the device manual for free EGS-01-4W Emos in PDF.
| Type of product | Ultrasonic Pest Repeller |
| Brand | Emos |
| Model | EGS-01-4W |
| Power supply | 110-240 V AC, 50/60 Hz |
| Power consumption | 3 W |
| Coverage area | Up to 1500 ft² (140 m²) |
| Ultrasonic frequency | 20-65 kHz (variable) |
| Material | ABS plastic |
| Dimensions | 90 x 70 x 40 mm |
| Weight | 100 g |
| Operating temperature | 0°C to 40°C |
| Color | White |
| Mounting | Plug directly into wall socket |
| Indicator light | LED (power on) |
| Safety certifications | CE, RoHS |
| Maintenance | Wipe with a dry cloth; avoid water |
| Pest types | Rats, mice, cockroaches, spiders, ants, etc. |
| Noise level | Silent to humans and most pets |
| Humane | Yes (disperses pests, does not kill) |
| Package contents | 1x repeller, 1x user manual |
| Warranty | 2 years |
Frequently Asked Questions - EGS-01-4W Emos
User questions about EGS-01-4W Emos
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Repellent in PDF format for free! Find your manual EGS-01-4W - Emos and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EGS-01-4W by Emos.
USER MANUAL EGS-01-4W Emos
Warning and safety instructions
Always read the manual before use.
△ Respect the safety instructions in this manual.
⚠️ Never remove the cabinet of this unit to make any
△ internal adjustments, do not remove plastic parts of the kabinet when it is
connected to the power supply network. Doing so may cause electric shock.
- Place the insect killer on a chosen place (hang it for example) and then connect the supply cable to the power supply network 230 V\~.
- Place the insect killer out of reach of children. Children must not manipulate with it and connect it to the power supply network.
• Install the insect killer far from flammable materials. It must not be used in an environment filled with explosive fines and combustible dust. The insect killer must not be used in stables, barns, garages etc.
- Always disconnect from the 230 V\~ power supply network when you manipulate with the insect killer.
Use the insect killer in dry indoor environments.
- The defective tube becomes hazardous waste after life expiration, so please wind it ecologically up.
- Do not use the insect killer if the supply cords or safety cabinet are damaged.
- If the supply line is damaged, it must be replaced by the qualified person so as to avoid an occurrence of a dangerous situation.
- This device is not designed to be used by people (including children) who lack the experience or are mentally, physically or with their senses unable to use the device safely unless supervised or instructed concerning the usage of the device by a person responsible for their safety. Children should be supervised to ensure that they do not play with the device.
Electric insect killer is made for killing flying insects. Specific light (colour) of the fluorescent tube (UV-A) attracts the flying insect and the electric charge on the unit in front of the light source kills it. The insect killer is ideal for kitchens, food shops and other environments dealing with the appearance of the insect.
Basic parameters
UV-A Fluorescent tube ∅ 15 × 136 mm; G5 (T5); 220–240 V\~/50 Hz, 4 W Dimension: ∅ 100 × 220 mm, supply cable length: 1 m
Clearing/maintenance
- Always uplug the unit from the power supply network 230 V-.
- Unscrew the bottom part (no.2 on the picture) anticlockwise by 45° and pull down to remove it.
- Empty it.
- Push the tray gently in and twist (clockwise by 45°) to secure it onto the unit (no. 2 on the picture).
- In case the plastic cabinet is dirty, clean it with a brush.
- Place the insect killer on a chosen place and connect it to the power supply network 230V\~
Tube replacement
We recommend that the tube is replaced by a specialist only.
1. Unplug the insect killer from the power supply network 230 V\~
2. Unscrew the bottom part (no.2 on the picture) anticlockwise by 45° and pull down to remove it.
3. Unscrew the plastic holder and remove it.
4. Take out the defective tube and replace it by a new one.
5. Insert the plastic holder and crew it up.

EMOS spol. s r. o.
- Assemble the bottom part (no. 2 on the picture) by turning it clockwise by 45^ 7. Install on a chosen place and connect it to the power supply network 230 V\~

Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfi II, dangerous substances may reach groundwater and subsequent food chain where
it could affect human health.
GB
1 Safety plastic grid
2 Back part
3 Electric board
4 Electric (high volt)
5. Fast power source
1 Ochranná plastová míž
2 Speed Cast
3 Flosty spoj
4 Liekinski minzka
5. Zátková tujíce
CZ
SK:
3 Tekana product 4 Tekana product
1.Експортазетка
- Fluorescentral Dje