CMic-V1M - Microphone Synco - Free user manual and instructions
Find the device manual for free CMic-V1M Synco in PDF.
| Product Type | Condenser Microphone |
| Brand | Synco |
| Model | CMic-V1M |
| Polar Pattern | Cardioid |
| Transducer Type | Electret Condenser |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | ≤ 2.2 kΩ |
| Sensitivity | -45 dB ± 3 dB re 1V/Pa |
| Sampling Rate | 68 kHz / 24-bit |
| Power Supply | 5V / 1A via USB Type-C |
| Signal-to-Noise Ratio | 72 dB |
| Maximum SPL | 135 dB SPL (1 kHz, 1% THD) |
| Dimensions (L × Diam) | 47 mm × 47 mm × 156 mm |
| Net Weight | 295 g |
| Output Connector | Type-C |
| Mute Function | Yes, press button to toggle mute (red indicator) |
| Monitoring Jack | 3.5 mm for real-time earphone monitoring |
| Indicator Light | Green (flicker during recording), Red (mute mode) |
| Cleaning Instructions | Use only a soft, dry cloth |
| Warranty Period | 30 days free replacement/repair, 12 months limited warranty |
Frequently Asked Questions - CMic-V1M Synco
User questions about CMic-V1M Synco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Microphone in PDF format for free! Find your manual CMic-V1M - Synco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CMic-V1M by Synco.
USER MANUAL CMic-V1M Synco
Microphone CMic-V1M >>> User Manual
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned herein.
Caring For Your SYNCO Product
- Please keep the product in a dry, clean, dust-free environment.
- Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
- Use only a soft and dry cloth for cleaning the product.
- Malfunction may be caused by dropping, impact of external force.
- Do not attempt to disassemble the product. Doing so voids warranty.
- Please have the product checked or repaired by authorized technicians if any malfunctions happened.
● Failure to follow all the instructions may result in mechanics damage. - Warranty does not apply to human errors.
Product Introduction

- Working Indicator
● ● ● ◎ ○
Green Light flicker: Normal Recording
(The green lights will flicker according to input level signal.)
● ● ● ● ●
Red Light: Mute Mode On
- Mute Mode
Press once to initiate mute mode, and the working indicator turns red.
- 3.5mm Monitoring Jack
For plug-in earphones to monitor the recording in real time. Please mind the loudness.
- Type-C Output
Operations
-
The Use of Desktop Microphone Stand

-
The Use of Microphone

Specifications
- Polar Pattern: Cardioid

- Performance Parameter
| Diaphragm Size | ∅14mm |
| Transducer | Electret Condenser |
| Frequency Response | 20Hz-20KHz |
| Impedance | ≤2.2KΩ |
| Sensitivity | -45dB+3dB re 1 Volt/Pascal |
| Sampling Rate | 48KHz/24bit |
| Power Supply | 5V/1A |
| S/N Ratio | 72 dB |
| Maximum SPL | 135dB (1KHz THD > 1%) |
| Dimensions (L x Diam) | 47mm x 47mm x 156mm |
| Output | Type-C |
| Net Weight | 295g |
Warranty
Warranty Period
Thank you for purchasing SYNCO products.
-
Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
-
Original SYNCO products are entitled to 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the first end-user.
Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).
Warranty Exclusions and Limitations
- Faults resulted from inappropriate use of a product without following its operation specification
● Artificial damage, e.g. crash, squeeze, scratch, or soaking - Modifications to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of element or circuit, label alteration
- The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off
- All consumable accessory attached to a product, like cable, wind muff, battery
- Faults as a result of force majeure, such as fire, flood, lightning, etc.
Warranty Claim Procedure
- If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO's customer service through email at. support@syncoaudio.com
- Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided.
- If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.
Guangzhou Zhiying Technology Co., Ltd
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
| WARRANTY CERTIFICATE | |
| Please register your warranty. Meanwhile, you are welcomed to contact us via Email: support@syncoaudio.com | |
| USER INFORMATION | Customer Name: |
| Phone Number: | |
| Email: | |
| Address: | |
| SALES INFORMATION | Sales Date: |
| Model: | |
| Product Code: | |
| Dealer: | |
| REPAIR RECORD | Service Date: |
| Technician: | |
| Issue: | |
| RESULT | □ Solved | □ Unsolved | □ Returned(Replaced) |