ZR9310 - Battery charger Emos - Free user manual and instructions

Product Type	Emergency Conversion Kit for LED Lighting
Brand	Emos
Model	ZR9310
Input Voltage	220–240 V AC, 50–60 Hz
Output Power (Emergency Mode)	6 W
Supported LED Voltage Range	10–50 V DC
Output Current (Emergency Mode)	600 mA
Battery Type	LiFePO4
Battery Voltage	6.4 V
Battery Capacity	1.5 Ah
Charging Time	Up to 24 hours
Backup Time	1 hour
Protection Class	IP20
Ambient Temperature Range	10 °C to 50 °C
Power Supply Cable Diameter	0.5–1.5 mm²
Dimensions (L × W × H)	212 × 73 × 28 mm
Features	Automatic battery charging and emergency mode; green LED status indicator; manual test button; deep discharge protection; compatible with 10–50 V DC LED light sources
Installation	Professional installation recommended
Cleaning	Wipe with a dry cloth; do not use water or solvents
Disposal	Do not dispose with domestic waste; use special collection points for electronic waste

Frequently Asked Questions - ZR9310 Emos

What is the Emos ZR9310?

The Emos ZR9310 is an emergency conversion kit designed for LED lighting fixtures. It automatically switches to emergency mode during a power failure.

How does the ZR9310 work?

Under normal conditions, it charges the connected battery. When mains power is lost, it converts battery voltage to a voltage compatible with the LED light source (10–50 V DC) to provide emergency lighting.

What input voltage does it require?

The ZR9310 operates on 220–240 V AC at 50–60 Hz.

What type of battery does it use?

It uses a LiFePO4 battery rated at 6.4 V with a capacity of 1.5 Ah.

How long does it take to fully charge the battery?

The maximum charging time is up to 24 hours.

How long does the emergency backup last?

The backup duration is 1 hour when the battery is fully charged.

How do I test the emergency function?

Press the manual test button on the unit. The green LED indicator will show the status: steady green indicates charging or fully charged; off means emergency mode is active.

What does the green LED mean?

A steady green LED indicates the battery is charging or fully charged. If the LED is off, the unit is operating in emergency (battery) mode.

Is the ZR9310 compatible with all LED lights?

It is compatible with LED light sources operating in the 10–50 V DC range. Ensure your LED fixture meets this specification.

What is the operating temperature range?

The ambient temperature range is 10 °C to 50 °C. Avoid installing in locations outside this range.

USER MANUAL ZR9310 Emos

graph TD
    A["Input"] --> B["LED Driver N"]
    A --> C["LED Driver L"]
    A --> D["Neutral"]
    A --> E["Un-switched Supply"]
    A --> F["Earth"]
    A --> G["Switched supply"]
    B --> H["Output"]
    C --> H
    D --> H
    E --> H
    F --> H
    G --> H
    H --> I["LED Panel light"]
    I --> J["LED Driver"]
    J --> K["Wire preparation 0.5-1.5mm²"]
    style A fill:#f9f,stroke:#333
    style I fill:#ccf,stroke:#333

GB | Emergency Conversion Kit

Electronic emergency conversion unit ZR9310 for emergency lightning is compatible with LED light sources operating in the range from 10 to 50 V DC. ZR9310 conversion unit detects power loss and converts battery voltage to the voltage compatible with emergency LED light source. Grid-emergency – LED source powered from external power and switched to emergency mode in the case of grid failure. ZR9310 inverter, when powered with 220–240 V/50–60 Hz, is charging the connected battery pack with dedicated voltage. If voltage in the power grid drops below the critical value or is lost, ZR9310 automatically switches to emergency mode from the battery. Charging process and presence of alternating voltage 220–240 V /50–60 Hz is signalized with green LED. ZR9310 inverter reaches rated parameters for the needs of emergency lightning in max. 24 h from the last working cycle in the emergency mode. Repeated power loss 220–240 V/50–60 Hz before the 24 h results in correct switching of the emergency system into emergency mode. In this case, operation time in the emergency mode depends on the battery pack charging level. The electronic monitoring system of the battery pack charging level, in the emergency mode, protects battery pack against total discharge, which positively affects to lifecycle and capacity of batteries.

TESTING:

The conversion kit is also fitted with a button for manual testing of the emergency module's functioning.

LED indicator

Depending on the luminescent colour of the LED indicator it displays the working state and determines whether there is an exception:

1. Green ON: battery charging and fully charged

2. Green OFF: DC mode (battery operation, emergency mode)

If the luminaire's or the battery's rated service life has expired, it must be replaced.

TECHNICAL PARAMETERS:

Power supply voltage: 220-240 V/50-60 Hz

Output power in case of emergency: 6 W

Mode of the operated lightning sources in emergency:

LED light source supplied with 10-50 V DC

Output current in emergency mode: so ma Achient temperature (to): 10.30 \~ 50.10

Batteries used: LiFePO4.6.4V, 1.5.4h

Max charging time: up to 24 h

Backup time: 1 hours

Protection class: IP20

Grade:

Power supply cables diameter: 0.5–1.5 mm ^2

Dimensions of Inverter (×W×h) 212 × 73 × 28 mm

Do not dispose with domestic waste. Use special

collection points for sorted waste. Contact local

■ authorities for information about collection points. If the electronic devices would be disposed in landfill, dangerous substances may reach groundwater and subsequently food chain, where it could affect human health.

Razmely invertors [1 × W × h]: 2.12 × 7.5 × 28 mm

Napetost: 220–240 V/50–60 Hz

no prostredi (tal): 10 °C = +50 °C