P5503 - Digital timer Emos - Free user manual and instructions
Find the device manual for free P5503 Emos in PDF.
| Product Type | Digital Timer |
| Brand | Emos |
| Model | P5503 |
| Power Supply | 230 V~, 50 Hz |
| Maximum Load | 16 (2) A, 3680 W |
| Accuracy (30 min interval) | ±5 s |
| Accuracy (1 hour interval) | ±10 s |
| Accuracy (6 hours interval) | ±1 min |
| Total Accuracy | ±5 min |
| Operating Temperature | 0 to +50 °C |
| Maximum On/Off Periods per Day | 48 |
| Segment Duration | 15 minutes (4 segments = 1 hour) |
| Time Setting Method | Turn dial clockwise to desired time |
| Manual Override Positions | I (always on) and ⏻ (programmed operation) |
| LED Indication | Red LED shows switched mode |
| Usage Environment | Dry indoor areas only |
| Safety Warning | Not for use by unsupervised persons with limited capabilities |
| Disposal | Do not dispose with household waste; use special collection points |
Frequently Asked Questions - P5503 Emos
User questions about P5503 Emos
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Digital timer in PDF format for free! Find your manual P5503 - Emos and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P5503 by Emos.
USER MANUAL P5503 Emos
GB 24 hours switching socket
Daily Plug-In Mechanical Timer serves to switch power supply 230 V\~ in the required time. This timer can be used to set up to 48 On/Off periods a day.
Specification
Power Supply 230 V\~, 50 Hz
Accuracy on switch 30 min ±5 s
Max. Load 16 (2) A, 3 680 W
Accuracy on switch 1 hour ±10 s
Temperature of environment 0 up to +50 °C
Accuracy on switch 6 hours ±1 min
Total accuracy of timer ±5 min
Setting the time
Turn the dial clockwise (as per indicating arrows) until the arrow-located at the top right of the centre dial, is pointing to the correct time. Ensure that the manual override switch on the top of the unit is set to the ⏻ position.
Each segment represents 15 minutes: 4 segments = 1 hour.
Setting of the required programme
- Using your finger, a pen or screwdriver pull up all the segments on the edge of the rotating disk in the required closed time. One segment switches the timer for 15 minutes (4 segments = 1 hour).
- The switch on the side of the timer switch to the down position ⏻ the switch works according to the programme.
- Plug the timer into the supply network 230 V\~/50 Hz
- Insert the appliance plug into the Timer plug
The switched mode of the socket is shown by red LED
The upper position I - socket is still switched independently of programme.
The down position ⏻– switch timer works according to the programme.
Warning
- Do not construe the timer.
• Always use the timer in dry indoor areas.
This appliance is not to be used by persons (including children), whose physical, sensible of mental inability or the lack of experience or knowledge prevents them from safe usage of this appliance unless they are supervised or have been instructed on safe usage by a person responsible for their safety. Children should be supervised to be prevented from playing with the appliance.

Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfi II, dangerous substanoes may reach groundwater and subsequently food chain, where it could affect human health.