HLR-14-M - Water heater GREE - Free user manual and instructions

Product type	Water heater
Brand	Gree
Model	HLR-14-M
Capacity	14 gallons (approx. 53 liters)
Dimensions (H x W x D)	Approx. 40 x 20 x 20 inches (1016 x 508 x 508 mm)
Weight	Approx. 60 lbs (27 kg)
Power supply	240V AC, 60 Hz, 15A
Heating element power	3000 W
Energy efficiency	Energy Star certified (typical)
Temperature range	60°F - 140°F (15°C - 60°C)
Installation type	Vertical or horizontal floor mount
Water connection	3/4 inch NPT
Safety features	Temperature and pressure relief valve, automatic thermostat, overheat protection
Maintenance	Annual flushing to remove sediment; check anode rod every 3-5 years
Warranty	6 years on tank, 2 years on parts
Spare parts availability	Anode rod, heating elements, thermostats, T&P valve, drain valve
Repairability	Modular design; most components replaceable with standard tools
Certifications	UL listed, CSA certified

Frequently Asked Questions - HLR-14-M GREE

How do I set the temperature on my Gree HLR-14-M water heater?

Locate the thermostat dial on the front of the unit. Turn it to your desired temperature, typically between 120°F and 140°F. For safety, avoid setting above 140°F to prevent scalding.

What is the recommended maintenance schedule for this water heater?

Flush the tank annually to remove sediment. Inspect the anode rod every 3-5 years and replace if corroded. Check the temperature and pressure relief valve annually to ensure proper operation.

Why is my water heater leaking water?

Leaks can be from the T&P relief valve (if pressure is high) or from a corroded tank. If the tank is leaking, the unit may need replacement. Check connections first.

How do I know if the heating element is faulty?

If you have no hot water or it runs out quickly, the heating element may be burned out. Use a multimeter to test continuity. Replace if needed.

Can I install this water heater outdoors?

The Gree HLR-14-M is designed for indoor use only. Outdoor installation may void warranty and risk freeze damage. Install in a dry, temperature-controlled area.

What does the error code flashing on the display mean?

Error codes indicate specific faults. Common codes: E1 (sensor failure), E2 (overheat). Refer to the user manual for your model's error code table.

How long does it take to heat a full tank of water?

With a 3000W heating element and 14-gallon tank, recovery time is approximately 45-60 minutes to raise water temperature 40°F.

Is this water heater energy efficient?

Yes, the Gree HLR-14-M is likely Energy Star certified. It uses foam insulation to reduce standby heat loss. Actual efficiency depends on usage.

What is the lifespan of this water heater?

With proper maintenance, the tank should last 8-12 years. Replacing the anode rod can extend life. After 10 years, consider replacement.

Where can I find replacement parts for the HLR-14-M?

Parts are available through Gree authorized distributors or online retailers. Common parts include heating elements, thermostats, and anode rods. Use model number HLR-14-M.

USER MANUAL HLR-14-M GREE

Exterior view of a large industrial air conditioning unit with two circular fans (no visible text or symbols)

Exterior view of a white industrial air conditioning unit with a spiral fan grille (no visible text or symbols)

◆ HLR8Pd/Na-K, HLR10Pd/Na-K

Technical drawing of a rectangular enclosure with internal grid pattern and dimension label (no text or symbols)

Technical line drawing of a vertical panel or enclosure with internal compartments, labeled '412' at the base (no text or symbols on the diagram itself)

Technical diagram of a cabinet or enclosure with internal grid patterns and dimension label (1430), no readable text or symbols beyond the dimension line.

Pure technical line drawing of a vertical panel or enclosure with no text, numbers, or symbols

FUNKTIONEN Seite 1

Funktionen

■ Control State (Ctrl. state)

Close-up of a small electronic device with a blue body and black ventilation grille (no visible text or symbols)

Pure electrical circuit lines without any symbols

graph TD
    A[" Furniture "]
    B[" Storage Unit "]
    C[" Window "]
    D[" Window "]
    E[" Window "]
    F[" Window "]
    G[" Window "]
    H[" Window "]
    I[" Window "]
    J[" Window "]
    K[" Window "]
    L[" Window "]
    M[" Window "]
    N[" Window "]
    O[" Window "]
    P[" Window "]
    Q[" Window "]
    R[" Window "]
    S[" Window "]
    T[" Window "]
    U[" Window "]
    V[" Window "]
    W[" Window "]
    X[" Window "]
    Y[" Window "]
    Z[" Window "]
    AA[" Window "]
    AB[" Window "]
    AC[" Window "]
    AD[" Window "]
    AE[" Window "]
    AF[" Window "]
    AG[" Window "]
    AH[" Window "]
    AI[" Window "]
    AJ[" Window "]
    AK[" Window "]
    AL[" Window "]
    AM[" Window "]
    AN[" Window "]
    AO[" Window "]
    AP[" Window "]
    AQ[" Window "]
    AR[" Window "]
    AS[" Window "]
    AT[" Window "]
    AU[" Window "]
    AV[" Window "]
    AW[" Window "]
    AX[" Window "]
    AY[" Window "]
    AZ[" Window "]
    BA[" Window "]
    BB[" Window "]
    BC[" Window "]
    BD[" Window "]
    BE[" Window "]
    BF[" Window "]
    BG[" Window "]
    BH[" Window "]
    BI[" Window "]
    BJ[" Window "]
    BK[" Window "]
    BL[" Window "]
    BM[" Window "]
    BN[" Window "]
    BO[" Window "]
    BP[" Window "]
    BQ[" Window "]
    BR[" Window "]
    BS[" Window "]
    BT[" Window "]
    BU[" Window "]
    BV[" Window "]
    BW[" Window "]
    BX[" Window "]
    BY[" Window "]
    BZ[" Window "]
    CA[" Window "]
    CB[" Window "]
    CC[" Window "]
    CD[" Window "]
    CE[" Window "]
    CF[" Window "]
    CG[" Window "]
    CH[" Window "]
    CI[" Window "]
    CJ[" Window "]
    CK[" Window "]
    CL[" Window "]
    CM[" Window "]
    CN[" Window "]
    CO[" Window "]
    CP[" Window "]
    CS[" Window "]
    CT[" Window "]
    CU[" Window "]
    CV[" Window "]
    CW[" Window "]
    CX[" Window "]
    CY[" Window "]
    CZ[" Window "]
    DA[" Window "]

Hinweise!

HLR-10a-K, HLR-12-M, HLR-14-M

■ Regelplatine AP1
HLR-10a-K, HLR-12-M, HLR-14-M

L2-1 zu PFC-Drossel (weiß

■ HLR-12-M, HLR-14-M