Metra 70-5511 - Câbles pour ordinateurs et accessoires

70-5511 - Câbles pour ordinateurs et accessoires Metra - Free user manual and instructions

Find the device manual for free 70-5511 Metra in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Metra 70-5511 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Wiring Harness Adapter
Brand Metra
Model 70-5511
Application Aftermarket car stereo installation
Compatibility Select vehicles with factory radio (verify fitment)
Wire Gauge 18 AWG (typical)
Wiring Standard EIA color code
12V Ignition Wire Red
12V Battery/Memory Wire Yellow
Ground Wire Black (if not present, ground to chassis)
Power Antenna Wire Blue
Amp Turn-On Wire Blue/White
Amp Ground Wire Black/White
Illumination Wire Orange
Dimmer Wire Orange/White
Speaker Wires Gray, Gray/Black (RF); White, White/Black (LF); Violet, Violet/Black (RR); Green, Green/Black (LR)
Factory Amp Bypass Supported (see manual for details)
Installation Method Strip, splice, solder, tape
Safety Note Isolate and tape unused wires to prevent shorts
Manual Included Yes (2 pages PDF)
Support 1-800-221-0932 (USA)

Frequently Asked Questions - 70-5511 Metra

What vehicles is the Metra 70-5511 compatible with?
The 70-5511 is a wiring harness adapter designed for select vehicles. Check Metra's website or manual for a specific fitment list. Typically fits GM, Chrysler, and other makes that use the EIA color code.
How do I install the Metra 70-5511?
Strip 1/2 inch of insulation, splice wires using crimp connectors or solder, then tape each joint. Isolate and tape any unused wires. Refer to the EIA color code chart in the manual.
What do the wire colors mean?
Red=12V ignition, Yellow=12V battery/memory, Black=ground, Blue=power antenna, Blue/White=amp turn-on, Orange=illumination, Orange/White=dimmer, Gray=right front (+), Gray/Black=right front (-), White=left front (+), White/Black=left front (-), Violet=right rear (+), Violet/Black=right rear (-).
Can I keep the factory amplifier when installing an aftermarket radio?
Yes, the 70-5511 supports keeping the factory amp. Follow the specific wiring instructions in the manual for amp bypass or integration.
What if my vehicle has no black ground wire?
If the black wire is not present, ground the radio directly to the vehicle chassis using a metal screw.
How do I connect the power antenna wire?
Connect the blue wire from the harness to the aftermarket radio's power antenna lead. If your radio has a blue/white wire for amp turn-on, use both as needed.
What should I do with unused wires?
Individually tape off the ends of any unused wires to prevent electrical shorts.
Does the Metra 70-5511 include a manual?
Yes, a 2-page PDF manual is available for free download. It includes the wiring diagram and installation instructions.
Is soldering required for installation?
Metra recommends stripping, splicing, soldering, and taping all connections for reliability. But crimp connectors can be used.
Where can I get support for the 70-5511?
Contact Metra at 1-800-221-0932 or visit their website at www.metraonline.com.

User questions about 70-5511 Metra

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Câbles pour ordinateurs et accessoires in PDF format for free! Find your manual 70-5511 - Metra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 70-5511 by Metra.

USER MANUAL 70-5511 Metra

FINAL WIRING CONNECTIONS

Make wiring connections using the EIA color code chart shown below and the instructions included with the head unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually tape off ends of any unused wires to prevent electrical short circuit.

METRA / EIA WIRING CODE

12V Ignition / Acc. .... . Red

12V Batt / Memory.....Yellow

Ground..... Black*

Power Antenna. . . . . . . . . Blue

Amp Turn-On .... Blue / White

Amp Ground..... Black / White

Illumination ..... Orange

Dimmer ..... Orange / White

Right Front (+) ..... Gray

Right Front (-)..... Gray / Black

Left Front (+) ..... White

Left Front (-). . . . . . . . . . . . . . White / Black

Right Rear (+) ..... Violet

Right Rear (-)....Violet / Black

*NOTE: When Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer's specifications.

STRIP SPLICE SOLDER TAPE

INSTALLATION INSTRUCTIONS 70-5511 70-5512* Ford Premium Sound System Harness To Integrate Aftermarket Radio with Factory Amplifiers and Speakers KIT COMPONENTS 70-5511 Power Harness Amplifier Integration Plug 70-5512 * Amplifier Integration Plug *Requires 70-1704 power harness TOOLS REQUIRED FOR INSTALLATION • Cutting Tool • Tape • Crimping Tool • Connectors

Metra 70-5511 - METRA / EIA WIRING CODE - 3

1-800-221-0932 www.metraonline.com

©Copyright 2004 Metra Electronics Corporation

TO INSTALL AN AFTERMARKET RADIO WHILE KEEPING THE FACTORY AMPLIFIER AND SPEAKERS

NOTES

A
Metra 70-5511 - TO INSTALL AN AFTERMARKET RADIO WHILE KEEPING THE FACTORY AMPLIFIER AND SPEAKERS - 1

natural_image Diagram of a server rack with two connectors and cable routing (no text or symbols)

B
(A) Strip wire ends back 1/2" (B) Twist ends together (C) Solder (D) Tape

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Metra

Model : 70-5511

Category : Câbles pour ordinateurs et accessoires