USB2VGA - Audio/video converter i-TEC - Free user manual and instructions

Product Type	USB to VGA Display Adapter
Brand	i-TEC
Model	USB2VGA / AN2480
Category	Audio/Video Converter
Package Contents	USB Display Adapter, USB cable (1 m, Type A to Mini USB), Driver CD, User's Manual
Dimensions (L x W x H)	84.3 x 54 x 17.8 mm
Connector Type	USB 2.0 (Type A) input, VGA output
Power Source	USB bus-powered, no external power required
Maximum Resolution	Full HD 1920x1080 pixels
Supported Resolutions	640x480, 800x600, 1024x768, 1280x960, 1280x1024, 1360x768, 1366x768, 1368x768, 1400x1050, 1440x900, 1600x1200, 1680x1050, 1920x1080
RAM	512 MB
Working Temperature	10-40 °C
Supported Modes	Extend (default), Mirror, Primary Display
Color Depth	16-bit or 32-bit
System Requirements	PC with available USB 2.0 port, Intel Pentium 1.2 GHz or higher, 512 MB RAM (recommended: 2.0 GHz, 1 GB RAM)
Operating Systems	Windows 2000 SP4, XP SP2 (32-bit), Vista (32/64-bit), 7 (32/64-bit), 8 (32/64-bit), 8.1 (32/64-bit), Mac OS X
Driver Installation	Install driver before connecting the adapter; do not connect before driver installation
Safety Instructions	Do not expose to extreme temperatures or moisture; use on a flat surface to prevent falls; keep the manual for future reference
Compatibility	USB 1.1 ports are supported but transfer speed will be slower
Country of Origin	European Union (inferred from conformity)

Frequently Asked Questions - USB2VGA i-TEC

How do I install the driver?

Insert the driver CD and run SETUP.EXE in the Driver folder. Follow on-screen prompts. For Windows Vista, install as Administrator. Do not connect the adapter before installing the driver. After installation, connect the adapter via USB.

What operating systems are supported?

Windows 2000 SP4, Windows XP SP2 (32-bit), Windows Vista (32/64-bit), Windows 7/8/8.1 (32/64-bit), and Mac OS X.

How do I use the adapter in Extend mode?

After driver installation, click the network connection icon near the system tray. Select Extend to extend your desktop to the additional monitor. You can also adjust the screen position using Extend To.

What resolutions does the adapter support?

It supports resolutions from 640x480 up to 1920x1080 (Full HD). Common resolutions like 1024x768, 1280x1024, and 1440x900 are also supported.

Can I use it as a primary monitor?

Yes. In display settings, select the DisplayLink Device and check Use this device as the primary monitor.

Does it work with USB 1.1 ports?

It can work with USB 1.1 but performance will be significantly slower due to lower bandwidth. USB 2.0 is recommended.

What is included in the package?

The package includes: USB 2.0 Display Adapter, USB cable (1 m, Type A to Mini USB), Driver CD, and User's Manual.

How do I switch from Extend to Mirror mode?

Click the network connection icon, select the DisplayLink device, then choose Mirror instead of Extend. This will show the same content on both monitors.

What should I do if the screen flickers during installation?

Screen flickering during driver installation is normal. It should stop once installation is complete. Restart your computer afterwards.

How do I clean and maintain the adapter?

Keep the adapter away from extreme temperatures and moisture. Use on a flat surface to avoid slipping. If it gets wet, check functionality before further use. Refer to the user manual for detailed care.

USER MANUAL USB2VGA i-TEC

This USB Display Adapter convert USB2.0 to graphic output VGA. It enables you to connect one more monitor, LCD or projector with VGA-output to a computer with a USB 2.0 port. Can be used in your office (for graphic designer, financial department,...), you can use it for making multiple screen presentations, on fairs or for your home-use (entertainment). Adapter supports FullHD resolution 1920x1080 pixels.

PACKAGE CONTENT

1) USB 2.0 Display Adapter FULL HD
2) USB cable - 1 m length (one side is connector type A, second is MiniUSB) – enables connect adapter to PC/NB
3) Driver CD
4) User's manual

SPECIFICATION

1) USB 2.0, powered by USB, do not need external power source
2) VGA
3) RAM: 512 MB
4) Supported Resolutions: 640x480, 800x600, 1024x768, 1280x960, 1280x1024, 1360x768, 1366x768, 1368x768, 1400x1050, 1440x900, 1600x1200, 1680x1050, 1920x1080
5) Dimension: 84.3 (L) x 54 (W) x17.8 (H) mm
6) Working temperature: 10-40°C
7) Supported Modes: Extend (Default), Mirror, Primary Display
8) Supported colors: 16 / 32 bit

SYSTEM REQUIREMENTS

1) Hardware: PC, one available USB 2.0 port. If you have USB 1.1, the transfer speed will be slower. Processor Intel Pentium 1.2 GHz or higher, 512 MB RAM (we recommend processor Intel Pentium 2.0GHz or higher and 1GB RAM).
2) OS: Windows 2000 SP4, Windows XP SP2 32bit, Windows Vista 32/64bit, Windows 7 32/64bit, Windows 8 32/64bit, Windows 8.1 32/64bit, Mac OS X

Note: There is a description of installation in Win XP; in Win 2000 / Vista / 7 / 8 / 8.1 it is similar, just screens may differ.

DRIVER INSTALLATION IN WINDOWS XP/VISTA

Do not connect the adapter to your computer before installing the provided driver.

1) Insert the provided driver CD into CD-ROM drive and double-click the SETUP.EXE file under the Driver folder.
2) Then follow the on-screen prompts to complete the installation.
For Windows Vista you should install the program as Administrator and then restart your PC/NB;
For Win 2000 OS: if prompted for system patch after running the setup file, please download and install the required patch first. After that, execute the setup file again to install the driver.
3) Connect the smaller end of the USB cable to the adapter. Then connect the other end of the cable to an USB 2.0 port on your computer. After the connection, Windows will automatically complete the installation.
4) Then we recommend the restart of your PC again.

Note: DO NOT connect the adapter to your computer before installing the driver.

1) Before the installation is complete, it's normal that the screen flicks black a couple of times.
2) Then we recommend the restart of your PC again.

DRIVER INSTALLATION IN MAC OS

Don't connect display adapter to PC/NTB before first use, until you install right drivers for video port from attached CD-ROM. It is necessary to install drivers before first use only.

Use the drivers from CD-ROM or download the latest drivers for video port at www.displaylink.com (DL-165) and install them in standard way:

a) Screen can blinks during installation, but it is not unusual.
B) We recommend to reboot PC after installation of drivers finish.

HOW TO USE IN WINDOWS OS

1. Next to the time on the menu bar Start click on the network connection icon.

Here you can select the configuration Update and Update withdrawal; then the Screen Resolution, Colour Quality - Medium (16bit) or High (32bit) and Screen Rotation.

This is followed by an important setting:

-you can select either Extend or Mirror for the way of setting the next screen. The Extend selection will extend the existing monitor by now installed monitor and by means of Extend To you select its position, or the selection Mirror makes it possible to have „mirror“ on the next screen. The selection Off switches off the Display adapter.

The advanced settings – after clicking on Advanced there is initiated the system Setting of display (can also be selected directly from the system).

1. Now you can carry out settings similar to those by means of point 1- Extend and Mirror

a) for Mirror: on the menu bar The display setting select adapter "DisplayLink Device" and let the blank field Extend the surface also to this monitor
b) for Extend: on the menu bar Setting the display select adapter "DisplayLink Device" and tick off the field Extend the surface also to this monitor.

Note: By ticking off the field „Use this equipment as a primary monitor“ you chose it as the main one.

After clicking on the mentioned monitor and its drawing over you position it as need may be. Confirm the warning on the change in setting the display.

Now by means of the mouse cursor you can work on both monitors and position the open applications as need may be.

SAFETY INSTRUCTIONS

• do not expose to the extreme temperatures and air moisture
• use the device on the flat pads – you avoid the slip and fall on the ground
• keep the activators and manual for the later possible use

In the co-operation with the service department:

• check the functionality after the drop into water, on the ground
• check the functionality after the cover breakthrough
• claim the equipment non-functioning according to the manual

For more information please refer to the User's Guide on the provided CD.

i-tec USB Display Adapter

VORWORT

Declaration of Conformity

declares that this product

Název, Názov, Nazwa, Product: i-tec USB 2.0 Display Adapter VGA

Model, Model, Model, Model: USB2VGA / AN2480

Určení, Určenie, opcje, determination:

Product is determined for using in PC as equipment.

splňuje tyto požadavky Directive 2004/108/EC:

splňa tieto požadavky Directive 2004/108/EC:

meets the essential requirements according to Directive 2004/108/EC:

and that it is safety under conditions of standard application.

Pure electrical circuit lines without any symbols

European Union Only

Note: Marking is in compliance with EU Directive 2002/96/EC and EN50419

English

This equipment is marked with the above recycling symbol. It means that at the end of the life of the equipment you must dispose of it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream. This will benefit the environment for all. (European Union only)

Deutsch