POW30625 - Drill PowerPlus - Free user manual and instructions
Find the device manual for free POW30625 PowerPlus in PDF.
| Product Type | 18V Cordless Drill/Screwdriver |
| Brand | PowerPlus |
| Model | POW30625 |
| Power Source | Battery (Ni-CD) |
| Battery Voltage | 18V |
| Battery Capacity | 800 mAh |
| Battery Type | Nickel-Cadmium (Ni-CD) |
| Charger Input | 230V / 50 Hz |
| Charging Time | 3-5 hours |
| No-Load Speed | 0-550 min⁻¹ |
| Max Torque | 12 Nm |
| Torque Settings | 20+1 (including drill mode) |
| Max Drilling Capacity | 10 mm (in wood, metal, plastic) |
| Chuck Type | Keyless chuck, 10 mm |
| Forward/Reverse | Yes, slide switch |
| LED Light | Yes, for workspace illumination |
| Sound Pressure Level | 71 dB(A) |
| Sound Power Level | 82 dB(A) |
| Vibration Level | Max 3.2 m/s² |
| Weight | Approx. 1.5 kg (with battery) |
| Warranty | 24 months |
| Included Accessories | 2 batteries, charger, charger adapter, 6 screw bits, 6 drill bits, bits holder |
Frequently Asked Questions - POW30625 PowerPlus
User questions about POW30625 PowerPlus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Drill in PDF format for free! Find your manual POW30625 - PowerPlus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POW30625 by PowerPlus.
USER MANUAL POW30625 PowerPlus
1 APPLICATION....2
2 DESCRIPTION (FIG A) 2
3 PACKAGE CONTENT LIST....2
4 SYMBOLS 2
5 GENERAL POWER TOOL SAFETY WARNINGS .... 3
5.1 Working area....3
5.2 Electrical safety....3
5.3 Personal safety .... 3
5.4 Power tool use and care....4
5.5 Service....4
6 SPECIFIC SAFETY WARNINGS....4
7 SAFETY INSTRUCTIONS FOR CHARGER AND BATTERY......4
8 OPERATION....5
8.1 Charging the battery (fig. B)....5
8.2 Positioning and removing a drill or screw bit....5
8.3 Forward/reverse switch (fig. A) 5
8.4 Adjusting the torque (fig. C)....5
8.5 Switching on and off (fig. A)....5
9 CLEANING AND MAINTENANCE....5
9.1 Cleaning....5
10 TECHNICAL DATA....6
11 NOISE....6
12 SERVICE DEPARTMENT 6
13 STORAGE....6
14 WARRANTY....7
15 ENVIRONMENT 7
16 BATTERY PACK....7
17 DECLARATION OF CONFORMITY 8
DRILL/ SCREWDRIVER 18V
POW30625
1 APPLICATION
Your rechargeable drill/screwdriver has been designed for drilling in wood, metal and plastics and for screw driving applications. It is not designed for commercial use.
WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions.
2 DESCRIPTION (FIG A)
-
On/off switch
-
Battery
-
Forward/reverse switch
-
Battery release button
-
Torque adjustment collar
-
LED light
-
Keyless Chuck 10mm
3 PACKAGE CONTENT LIST
■ Remove all packaging materials.
- Remove remaining packaging and packing inserts (if included).
- Check that the package contents are complete.
- Check the appliance, the power cord, the power plug and all accessories for transportation damage.
- Keep the packaging materials as far as possible until the end of the warranty period. Then take it to your local waste disposal system.
WARNING Packaging materials are not toys! Children must not play with plastic bags! There is a danger of suffocation!
1 x Machine
1 x Bits holder
1 x Charger
6 x Screw-bits
1 x Charger adapter
2 batteries
6 x Drill bits
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
 | Denotes risk of personal injury or damage to the tool. |  | Read manual before use |
 | In accordance with essential requirements of the European directive(s) | ||
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions for future reference. The term "power tool" in the safety warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
5.1 Working area
- Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
- Do not operate power tools in potentially explosive surroundings, for example, in the presence of inflammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders at a distance when operating a power tool. Distractions can cause you to lose control of it.
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the rating plate.
- Power tool plugs must match the outlet. Never modify the plug in any way. Do not use adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce the risk of a lethal electric shock.
- Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and refrigerators. There is an increased risk of a lethal electric shock if your body is earthed.
- Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will increase the risk of a lethal electric shock.
- Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of a lethal electric shock.
- When operating a power tool outdoors, use an extension cable suitable for outdoor use. Using a cord suitable for outdoor use reduces the risk of a lethal electric shock.
- If operating a power tool in a damp location is unavoidable, use a power supply protected by a residual current device (RCD). Using an RCD reduces the risk of a lethal electric shock.
5.3 Personal safety
- Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.
- Use safety equipment. Always wear eye protection. Using safety equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal injury.
- Avoid accidental starts. Ensure the switch is in the off position before inserting the plug. Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely.
- Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached to a rotating part of the power tool may result in personal injury.
- Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable you retain control over the power tool in unexpected situations.
- Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from the power tool. Loose clothes, jewellery or long hair can become entangled in the moving parts.
- If there are devices for connecting dust extraction and collection facilities, please ensure that they are attached and used correctly. Using such devices can reduce dust-related hazards.
5.4 Power tool use and care
- Do not expect the power tool to do more than it can. Use the correct power tool for what you want to do. A power tool will achieve better results and be safer if used in the context for which it was designed.
- Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken switch is dangerous and must be repaired.
- Disconnect the plug from the power source before making adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- Store power tools, when not in use, out of the reach of children and do not allow people who are not familiar with the power tool or these instructions to operate it. Power tools are potentially dangerous in the hands of untrained users.
- Maintenance. Check for misalignment or jammed moving parts, breakages or any other feature that might affect the operation of the power tool. If it is damaged, the power tool must be repaired. Many accidents are caused by using poorly maintained power tools.
- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control.
- Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work which needs to be done. Using a power tool in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
- Your power tool should be serviced by a qualified specialist using only standard spare parts. This will ensure that it meets the required safety standards.
6 SPECIFIC SAFETY WARNINGS
- Remove the battery from the machine during maintenance and when the machine will not be used for a longer period of time.
- Only use the prescribed type of battery (see the technical data).
7 SAFETY INSTRUCTIONS FOR CHARGER AND BATTERY
- Read the general instructions and safety instructions carefully before charging the battery.
- Do not use machines, attachments and chargers for works other than those for which they are designed for.
■ Before drilling holes or screwing into a wall, in case of doubt check with a metal-/voltage detector that you are not breaking into an electricity, gas or water supply line.
■ Before you lay down the Drill/Screwdriver, make sure that all moving parts have come to a stop.
- Avoid frequent jams when screwing or drilling, as this could damage the batteries.
- Only use the prescribed charger to load the battery. Do not charge batteries of another type with this charger. Mains adaptors are only to be used together with the charger socket and the accompanying battery.
- Only use the charger in a dry environment at a temperature between 10 °C and 40 °C.
- Do not use the charger when it has been damaged.
■ Only have the charger and battery repaired by our technical service department.
- Prevent the battery from short circuiting. Make sure that the battery connections cannot touch metal objects.
- Do not store the battery where the temperature may rise above 50 °C, e.g. in a car which has been parked in the sun.
■ Do not burn the battery.
■ Never attempt to open the battery.
- In case of skin contact of the battery fluid (a solution of 25-30% potassium hydroxide), flush immediately with abundant water. Neutralize with a mild acid such as lemon juice or vinegar. In case of eye contact, rinse abundantly for 10 minutes with clean water and consult a physician.
8 OPERATION
8.1 Charging the battery (fig. B)
The battery (6) must be charged before first use. Only after several charge and discharge cycles the battery will attain full capacity.
- Remove the battery from the machine.
■ Connect the battery to the charger. - Insert the mains adaptor of the charger into a mains outlet. Red LED lights. The green charging indicator lights when the battery is charging. Never charge the battery for more than 5 hours. If the battery is fully charged, the green charging indicator will go out.
8.2 Positioning and removing a drill or screw bit
This tool is equipped with a keyless chuck.
- Open the chuck by turning the collar.
- Insert the drill or screw bit in the chuck.
- Close the chuck by firmly tightening the collar while holding the rear part of the chuck with the other hand.
- In order to remove the drill or screw bit proceed in reverse order. Before positioning or removing a drill or screw bit always remove the battery from the machine.
8.3 Forward/reverse switch (fig. A)
■ Push the forward/reverse switch (2) from right to left side to drill holes and fasten screws.
- Push the forward/reverse switch (2) from left to right side to loosen screws. Always wait until the motor has come to a complete standstill before changing the direction of rotation.
8.4 Adjusting the torque (fig. C)
This machine has been fitted with an adjustable coupling (20+1 pos) to limit the torque when tightening screws.
- Turn the adjustment collar (3) clockwise to reduce the torque and counterclockwise to increase the torque. The correct setting depends on the type and size of the screw and the work piece.
- In case of doubt, start with the lowest setting and increase the torque until you have reached the desired result.
- For drilling, turn the adjustment collar fully counterclockwise (to the drilling symbol).
8.5 Switching on and off (fig. A)
■ To switch on the machine, press the on/off switch (1).
- To switch off the machine, release the on/off switch.
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power plug.
9.1 Cleaning
- Keep the ventilation slots of the machine clean to prevent overheating of the engine.
- Regularly clean the machine housing with a soft cloth, preferably after each use.
- Keep the ventilation slots free from dust and dirt.
- If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.
10 TECHNICAL DATA
| POW30625 | |
| Voltage / frequency charging unit | 230 V / 50 Hz |
| Rated Voltage | 18V |
| Rotation speed | 0-550 min ^-1 |
| Torque positions | 20+1 |
| Max. drill capacity | 10 mm |
| Charger time | 3/5 hours |
| Battery capacity | 800 mAh |
| Battery type | Ni-CD |
| Max. torque | 12 Nm |
| Chuck type | Keyless chuck |
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
| Acoustic pressure level LpA | 71 dB(A) |
| Acoustic power level LwA | 82 dB(A) |
ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
aw (Vibration)
Max 3,2 m/s²
K = 1,5 ~m / s^2
12 SERVICE DEPARTMENT
- Damaged switches must be replaced by our after-sales service department.
- If the connecting cable (or mains plug) is damaged, it must be replaced by a special connecting cable which is available from our service department. Replacement of the connecting cable should only be carried out by our service department (see last page) or by a qualified specialist (qualified electrician).
13 STORAGE
- Thoroughly clean the whole machine and its accessories.
- Store it out of the reach of children, in a stable and secure position, in a cool and dry place, avoid too high and too low temperatures.
- Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
- Don't keep it in plastic bags to avoid humidity build-up.
14 WARRANTY
- This product is warranted as provided by law for a 24-month period effective from the date of purchase by the first user.
- This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.
- Damage and/or defects resulting from inappropriate use also do not fall under the warranty provisions.
- We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool.
- Repairs may only be carried out by an authorized customer service center for Powerplus tools.
- You can always obtain more information at the number 00 32 3 292 92 90.
- Any transportation costs shall always be borne by the customer, unless agreed otherwise in writing.
- At the same time, no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload.
- Definitely excluded from the warranty is damage resulting from fluid permeation, excessive dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not following the instructions given in the manual), inexpert assembly, lightning strike, erroneous net voltage. This list is not exhaustive.
- Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commencement of a new warranty period in case of a device replacement.
■ Devices or parts which are replaced under the warranty therefore remain the property of Varo NV.
- We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.).
- Your purchase receipt must be kept as proof of date of purchase.
- Your appliance must be returned undismantled to your dealer in an acceptably clean state, (in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase.
- Your tool must be charged at least 1x per month to ensure optimal operation of this tool.
- Attention: When using Ni-Cd batteries, the battery must be first fully discharged and then fully recharged. Thus you will prevent possible capacity loss.
15 ENVIRONMENT
Should your appliance need replacement after extended use, do not dispose of it with the household refuse, but in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling advice.
16 BATTERY PACK
This product contains nickel-cadmium. To preserve natural resources, please recycle or dispose of batteries properly. Local, state or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash. Consult you local waste authority for information regarding available recycling and/or disposal options.
17 DECLARATION OF CONFORMITY
C ∈
VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,
Product: Drill/ Screwdriver
Trade mark: POWERplus
Model: POW30625
is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amendments up to the date of signature);
2004/108/EC
2006/42/EC
2011/65/EU
European harmonized standards (including, if applicable, their amendments up to the date of signature);
EN60745-1 : 2009
EN60745-2-1:2010
EN60745-2-2:2010
EN55014-1:2006
EN55014-2:1997
Keeper of the Technical Documentation : Philippe Vankerkhove, VARO – Vic. Van Rompuy N.V.
The undersigned acts on behalf of the company CEO,
Hugo Cuypers
Regulatory Affairs – Compliance Manager
07/04/2015
- DRILL/ SCREWDRIVER 18V
- POW30625
- APPLICATION
- DESCRIPTION (FIG A)
- PACKAGE CONTENT LIST
- SYMBOLS
- GENERAL POWER TOOL SAFETY WARNINGS
- Working area
- Electrical safety
- Always check that the power supply corresponds to the voltage on the rating plate.
- Personal safety
- Power tool use and care
- Service
- SPECIFIC SAFETY WARNINGS
- SAFETY INSTRUCTIONS FOR CHARGER AND BATTERY
- OPERATION
- Charging the battery (fig. B)
- Positioning and removing a drill or screw bit
- Forward/reverse switch (fig. A)
- Adjusting the torque (fig. C)
- Switching on and off (fig. A)
- CLEANING AND MAINTENANCE
- Cleaning
- NOISE
- SERVICE DEPARTMENT
- STORAGE
- WARRANTY
- ENVIRONMENT
- BATTERY PACK
- DECLARATION OF CONFORMITY
- C ∈
Brand : PowerPlus
Model : POW30625
Category : Drill