VT-1759 SR - Water heater Vitek - Free user manual and instructions
Find the device manual for free VT-1759 SR Vitek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Storage Water Heater |
| Brand | Vitek |
| Model | VT-1759 SR |
| Capacity | 30 liters |
| Power Rating | 2000 W |
| Power Supply | 220-240 V ~ 50 Hz |
| Dimensions (H x W x D) | 500 x 400 x 400 mm |
| Weight | 5 kg |
| Material | Steel with enamel coating |
| Heating Element | Copper immersion heater |
| Thermostat | Adjustable with temperature range 30-75°C |
| Safety Features | Overheat protection, pressure relief valve, anti-freeze mode |
| Installation | Wall-mounted horizontal or vertical |
| Insulation | Polyurethane foam, 30 mm thickness |
| Standby Energy Loss | 0.5 kWh/24h |
| Water Connection | 1/2 inch inlet and outlet |
| Control System | Mechanical dial with indicator light |
| Cleaning and Maintenance | Descaling recommended every 6 months; wipe exterior with damp cloth |
| Spare Parts Availability | Anode rod, thermostat, heating element available from Vitek service centers |
| Repairability Index | 7/10 (easy to replace parts) |
| Energy Efficiency Class | C (for 30L model) |
| Noise Level | < 25 dB |
Frequently Asked Questions - VT-1759 SR Vitek
How do I install the Vitek VT-1759 SR water heater?
Installation should be done by a qualified professional. The heater must be wall-mounted horizontally or vertically using the supplied brackets. Ensure it is connected to a 230V power outlet with proper grounding.
What is the recommended temperature setting?
The thermostat is adjustable between 30°C and 75°C. For energy efficiency and to prevent scalding, set it to 50-60°C.
How do I descale the water heater?
Descaling is recommended every 6 months. Turn off power and water supply, drain the tank, and fill with a descaling solution (e.g., vinegar or citric acid). Let it sit for a few hours, then rinse thoroughly.
What does the pressure relief valve do?
The pressure relief valve automatically releases excess pressure to prevent the tank from bursting. It is a critical safety feature.
Why is my water heater not heating water?
Check if the power supply is on and the thermostat is set correctly. If the heating element is faulty, it may need replacement. Also, ensure the overheat protection hasn't tripped.
How long does it take to heat a full tank?
For a 30-liter tank with a 2000W element, it takes approximately 30-60 minutes to reach 60°C from cold water.
Can I use the water heater in freezing temperatures?
The heater has an anti-freeze mode that activates when the water temperature approaches 5°C. However, it is best to drain the tank if not used for long periods in freezing conditions.
What spare parts are available for this model?
Common spare parts include the anode rod (replace every 2 years), heating element, and thermostat. They are available through Vitek authorized service centers.
How do I replace the anode rod?
Turn off power and water supply, drain the tank. Unscrew the old anode rod from the top flange and install a new one. Tighten securely and check for leaks. It is recommended to replace the anode rod every 2 years to prevent corrosion.
Is the water heater energy efficient?
The heater has an energy efficiency class of C for the 30L model. To improve efficiency, reduce standby losses by insulating the tank and setting the thermostat to 60°C.
User questions about VT-1759 SR Vitek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual VT-1759 SR - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-1759 SR by Vitek.