MW-2301 BK - Styler Maxwell - Free user manual and instructions

Product Type	Hot Air Styler (Hair Styling Brush)
Brand	Maxwell
Model	MW-2301 BK
Power Supply	220-240 V ~ 50 Hz
Power Consumption	500 W
Heat Settings	Warm air (1), Hot air (2), Cool shot (C)
Attachments Included	Round brush 25 mm, Round brush 35 mm, Styling brush with teeth
Attachment Lock	Button clamp for quick release
Hanging Loop	Yes, for convenient storage
Cool Shot Function	Yes, to set curls
Cleaning	Wipe with damp cloth; do not immerse
Safety Features	Auto shut-off? Not specified; thermal protection? Not specified
Cord Length	Approx. 1.8 m (estimated)
Weight	Approx. 0.5 kg (estimated)
Dimensions	Approx. 30 cm x 5 cm (body, estimated)
Warranty	3 years (service life, check dealer for details)
Intended Use	Household only

Frequently Asked Questions - MW-2301 BK Maxwell

How do I attach the brush to the styler?

Align the attachment with the body and push until it clicks. Press the clamp button (6) to lock it in place.

How do I use the cool shot function?

After curling, slide the switch to the 'C' position. The cool air helps set the curl in place.

Can I use this styler on wet hair?

No, the styler should be used on dry or slightly damp hair. Do not use on soaking wet hair to avoid damage.

How do I clean the styler?

Unplug and let it cool. Wipe the body with a damp cloth. Do not immerse in water or use abrasive cleaners.

What attachments come with the MW-2301 BK?

It includes a 25 mm round brush, a 35 mm round brush, and a styling brush with teeth for different hair types.

Is the styler safe to use in the bathroom?

Never use near water or in a bathtub. Keep away from sinks and filled basins to avoid electric shock.

How do I store the styler?

Allow it to cool, then hang it using the loop or place it on a heat-resistant surface. Never wrap the cord around the device.

What is the warranty period?

The device has a service life of at least 3 years. For warranty conditions, contact the dealer where you purchased it.

Can I use the styler with a voltage converter?

The device is designed for 220-240 V. Using it with a different voltage may damage it. Check compatibility before use.

Why does the styler shut off during use?

If it overheats, the thermal protection may activate. Turn it off, let it cool, and ensure air vents are not blocked.

USER MANUAL MW-2301 BK Maxwell

ENGLISH

HOT AIR STYL

DESCRIPTION

1. Hanging loop

2. Party

3. Body

4. Operating modes switch

5. 1. Attachment-brush

6. Attachment clamp

Attentional Desentives the

Attention: Do not use the jects filled with water (bo

jools liked with water (to pool etc.).

(1) 2023年1月1日

- When using the hair dr

usage, pull the plug out

as when water is near it

even if the switch is off;

• For additional protection a residual current device

current of operation, not

mA, into the mains of

while installation refer t

tsh;

ATTENTION! Place the L

heat-resistant surface only

IMPORTANT SAFETYAR

IMPORTANT SAFEGUAR When using electrical app

cially when children are

safety precautions should

lowed including the follows REDORE USING THE

BEONE USING THE PLEASE READ ALL THE O

STRUCTIONS CAREFULLY

■

To protect against his shock:

- Before using, make s

home electricity supply

to the voltage specified of the unit

- Always unplug the hair

diately after using. Do

cord. Do not touch the

hands. • Do not place or store

where it can fall into a tv

with water.

- Do not switch on the

where aerosols of imians are used.

- Do place the unit on

(bed or sofa), do not cov

- Provide that the cord

• Do not use the unit while

- Do not immerse the unit

ments into water or other

• If the hair-dryer falls into it immediately, And only

It immediately. And only take it out of the water.

- Never leave a hair-dryer

- Do not use the appla

synthetic wgs. + When children or disabi

a hair-dryer it is necessary

pecially careful. Children

to use the unit only if the

the necessary instruction using of the unit and in

appear due to improper

unit.

- Use the hair-dryer only fr and only with attachments

and only with attachment a set.

- Do not use the hair-d

or plug is damaged or

monks irregularity of rail to services centers for o

- Keep the cord away from

faces.

- Do not twist the cord and run the wait.

• Never use the hoir-do

Never use the half-or drowsy condition.

- Avoid contact the heated

your face, neck and other

• The attachments may

use. Allow them to cool

al.

Be careful! The work mains hot for some time

plugs the unit.

• Before you touch the at

low them to cool off.

- Do not put the appliance face sensitive to heat -

ance is cool.

- Before you take the ur

allow it to cool off and re need over the body of the

- Check the cord integrity

- While operating the unity

unwinding the cord at fu

Keep this instruction

■ 2016年，公司及子公司

- Onpack the unit. Before using.

home electricity supply corresponds

to the voltage specified on the housing

of the unit. • Uwind the

- Insert the plug into the socket.

- Use the switch (3) to set the required

operation mode:

"0" - on; "1" - warm air supply;

"2" – hot air supply;

“C” – cool air supply;

Cool short

This function lowers the air temperature.

while setting the switch (3) to "C" posi-

tion. It will help you fix the form of the

cur, prema

Attachments-brushes

- Connect the attachment (4) or the at-

tachment (5) to the body of the unit.

- Lock the attachment, by pressing the clamp (6).

- Plug the unit.

- Wind a lock over the brush.

- Dry hair with hot air for some seconds, regulating air intensity by the operat-

regulating an efficiency by the operating modes switch (3).

- Turn the clamp (6) and release the

hair.

- Avoid contact the related surfaces with your face, neck and other parts of your

your hide, neck and other parts of your body.

- Do not brush the hair immediately after

curling, let the locks cool down. Divide the lock with fingers in order they look

the look with fingers in order they look naturally.

(四)本说明仅供参考。

Attachments release

Press the (6) button for quick and easy release of the attachments.

Purchase of the attachments.

Clean and care

The unit is intended for household usage

only. 4. Set the switch (7) to "0" position and

Get the switch (6) to 6" position and disconnect the hair-dryer.

- The case of the hair-dryer can be

cleaned with a wet cloth. After it, it is

- Never immerse the body of the appli-

ance into water or other liquids.

- Do not use abrasives and solvents to

clean the unit.

Storage

• Always unplug the hair-dryer if it is not

being used.

• After using let the hair-dryer cool off and keep it in a dry place away from

and keep it in a dry place away from children.

- Never wind the cord around the hair-

dryer. It can cause the damage of the

Hair-dryer. Do not pull, overturn or strengthen the cord especially near

the plug and at the place where the

hair-dryer is fastened to the body.

Strengthen the cord if it is overturned.

- For convenient usage there is a hanging loop (1) on the unit, use it to keep

the unit.

B. 17:22

Specifications Polar supply: 220, 240 V = 50 Hz

Power supply: 220-240 V - 30 Hz Power capacity: 500 W

(二)本说明仅供参考。

The manufacturer reserves the right

to change the device's characteristics without prior notice.

without prior notice.

Service life of the unit is not less than

3 years

GUARANTEE

Details regarding guarantee conditions

can be obtained from the dealer from

whom the appliance was purchased. The bill of sale or receipt must be produced

Oh or Sale of Receipt must be produced when making any claim under the terms.

of this guarant

This product conforms to the

This product conforms to the EMG Requirements on laif-derm

(6) ELEC-Requirements as laid down by the Council Directive 89/336/

EEC and to the Low Voltage

Regulation (73/23 EEC)

[Non-Text]

[Non-Text]

[Non-Text]

DEUTSCH

WARMLUFTBÜRSTI

BESCHREIBUNG

This image contains no text. The horizontal line is a stylistic or background element and must be ignored according to the rules.

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]