VT-2290 W - Curling iron Vitek - Free user manual and instructions

Product Type	Curling Iron
Brand	Vitek
Model	VT-2290 W
Color	White (W)
Swivel Cord	Yes, for easy maneuverability
Safety Stand	Included for hot surface placement
Protective Cool Tip	Helps prevent burns
Clamp	Spring-loaded clamp for holding hair
Operating Surface	Heated barrel for curling
Power Indicator	Red light when powered on
Power Switch	0/I switch
Power Supply	AC mains, 220-240V (typical)
Power Consumption	Approximately 30-50W
Heating Time	Quick heating, ready in about 60 seconds
Barrel Size	Not specified, likely 19-32 mm (common)
Cord Length	Approx. 1.8-2.5 m
Weight	Approx. 350-450 g
Dimensions	Approx. 35 x 4 x 4 cm
Safety	Do not use near water; unplug after use
Maintenance	Unplug and allow to cool before cleaning; wipe with damp cloth
Spare Parts	Not available separately; contact service center
Warranty	Manufacturer warranty, check local terms

Frequently Asked Questions - VT-2290 W Vitek

How long does it take to heat up?

The curling iron heats up quickly, typically within 60 seconds after switching on.

Can I use the curling iron on wet hair?

No, for safety and best results, use the curling iron on dry hair only. Wet hair can cause damage and electric shock.

What should I do if there is a strange smell during first use?

A slight smell from the heating element is normal during the first few uses. It will dissipate after a short time.

How do I clean the curling iron?

Unplug the iron and let it cool completely. Wipe the barrel and surfaces with a damp cloth. Do not immerse in water.

Can I use the curling iron in the bathroom?

No, it is dangerous to use near water. Do not use near bathtubs, showers, or sinks containing water.

What is the maximum hair section size?

For best results, use locks of hair no wider than 4-5 cm (about 1.5-2 inches).

Does the cord swivel?

Yes, the curling iron has a swivel cord that allows free movement without tangling.

What does the power indicator do?

The power indicator lights up red when the unit is switched on and heating.

Can I leave the curling iron unattended while heating?

No, never leave the curling iron unattended while it is plugged in or hot. Always place it on the safety stand.

How should I store the curling iron?

After use, unplug and allow it to cool completely. Store in a dry place away from children. Do not wrap the cord tightly around the iron.

USER MANUAL VT-2290 W Vitek

SAFETY MEASURES ATTENTION! Do not

containers filled with v

swimming pool etc.].

taking the power

mains socket, as cl

dangerous even if off

• For additional prote

a residual current

operation current m into the mains of the

specialist for install

1. REVENUE SALES

SAFETY MEASURES Before using the

instructions careful

instructions for future

Use the unit for inter

as it is started in this re

the unit can lead to its

harm to the Uber of property

proporting

- Before switching

voltage of the main operating voltage

- Do not switch the

where aerosols or

1. Hair spray should be

Hair styling is finish-

- It is recommended

er cord to its full ker unit

• The power cord she

- touch hot objects,

- be immersed into a - run over short edu

– be used for carrying

• Do not touch the un

- Check the cord ins

odically:

• Never use the uni

or the plug is claim improperly or after

Contact the author

for all repair issues

- Do not use the unit - Do not place or in

es where it can fall

filled with water;

Unit body, cord of other liquids

• If the unit was drop

it immediately. An

• Do not leave the

tended.

- Do not use the u

- Do not use the up

synthetic wigs.

- Avoid contact of ho

with your face, he your body.

- Do not put the op

sensitive surfaces,

• Place the unit on th

flat heat-resistant s

• Take the switched e

only. Do not touch the unit is operating.

- Be careful! The

remains hot for son

• Before you take 1

cool down, do not v

around the unit. Always up/up th

• Always' triping in after usage and be

- When unplugging the

but not the cord. • For children colon

- For children safety, ethylene bags, us

unattended.

• Attention! Do not with polyethylene h

of suffocation!

• Children and disal

the unit under supe • This unit is not in

children or disable

[Non-Text]

they are given all the necessary instruc- tions by a person who is responsible

bons by a person who is responsible for their safety on safety measures and

information about danger that can be

caused by improper usage of the unit.

Before the first time

before the first use

After unit transportation or storage

at low temperature it is necessary to

keep it for at least two hours at room temperature before switching on.

- Take the curling tongs out of the pack-

aging and unwind the power cord com- pletely

- Before connecting the unit to the mains,

makes sure that your home mains volt-

age corresponds to the voltage speci- fied on unit body

- Insert the power plug into the mains.

socket.

- Set the switch (7) to the "T" position to switch the curling loop on: the power

Indicator (6) will light up.

- Place the longs on the safety stand (9)

and let it heat up. Note: During the first operation some

foreign smell from the heating element

is possible, this is normal.

Use

- Divide the hair into locks not wider than

4-5 cm each.

- Take the unit by its handle (5). - Take a hair lock near hair roots with the

free hand.

- Press the clamp lever (4) and take the

lock and, released the lever (4) and wrap the hair around the whole operating sur-

the hand stands for which spinning out face (3).

- Wait for several seconds to make sure

the lock is held, then uncur the half and release the lock from the clamp (2).

- Repeat this procedure until you finish

styling all your hair.

- Place the unit on the slanty stand (9) between operations

- After you finish curling, switch the unit

off by setting the switch (7) to the "0" setting. The indicator will be set

position, the indicator (b) will go out. - Unplug the unit

- Place the unit on the safety stand (9)

and let it cool down completely.

Cleaning and care

- Before cleaning unplug the unit and let

it cool down completely.

- Do not immense the unit, the power cord and the power nup of the unit into upper

and will partner play on the law of the liquid or other liquids.

- Wipe the unit body with a soft clamp

- Do not use detercents, abrasives and

and not use similar wire, denitrates and solvents to clean the unit.

21

Storage - Let the unit cool down completely and

make sure that the unit body is clear

and dry before taking it away for stor-

– Never wind the power cord around the

unit, as it can damage the cord.

- Keep the unit away from children in a

dry cool place.

Delivery set

Curling tongs - 1 pc.

Instruction manual - 1 pc.

Technical specifications

Power supply: 220-240 V -50/60 Hz

Maximal power consumption: 25 W

The manufacturer preserves the right

to change the specifications of the unit without a preliminary verification.

In favor: a preliminary publication.

Unit operating life is 5 years

1. 2017年第四次

Guarantee Details regarding guarantee conditions can

be obtained from the dealer from whom

the appliance was purchased. The bill of sale or receipt must be produced when

sale or receipt must be produced when making any claim under the terms of this

guarantee.

This project conforms to the FMG.

C€ Requirements as laid down by the Council Direction 2004 (298/EC) and by the Lien Hollman

Regulation (2008) [93, 01C]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

DEUTSCH