SHD 108VT - Hair Dryers SENCOR - Free user manual and instructions

Product Type	Hair Dryer
Brand	Sencor
Model	SHD 108VT
Rated Voltage	220-240 V
Rated Frequency	50/60 Hz
Rated Power Input	1800-2200 W
Safety Class	II (Double insulation)
Noise Level	70 dB(A)
Airflow Speed Settings	2 (gentle, fast)
Temperature Settings	3 (low, medium, high)
Cool Shot Button	Yes (pulse button for cool air)
Ionisation Function	Yes (generates negative ions)
Attachments Included	Removable airflow concentrator (A1), Diffuser for bulky hairstyle (A6)
Hanging Loop	Yes
Air Inflow Grill	Tilt-out for easy cleaning
Auto Shut-Off	Yes (if air openings blocked)
Cleaning Method	Wipe exterior with damp cloth; clean grill by tilting out and removing hair
Usage Environment	Domestic indoor use only; avoid water proximity
Recommended Accessories	Use only supplied or manufacturer-recommended attachments
Warranty	Standard warranty; tampering voids warranty

Frequently Asked Questions - SHD 108VT SENCOR

How do I use the ionisation function on the Sencor SHD 108VT?

The ionisation function is activated automatically when the hair dryer is turned on. It creates negative ions to neutralize static charge, giving your hair shine and vitality.

How do I clean the air inflow grill?

Turn off and unplug the dryer. Use your thumb to push down the top edge of the grill (A7) and tilt it outward. Remove any hair caught inside, then push the grill back until you hear a click. Wipe the exterior with a damp cloth.

What attachments come with the SHD 108VT?

It includes a removable airflow concentrator (A1) for precise drying and styling, and a diffuser (A6) for adding volume to curly or wavy hair.

Can I use this hair dryer in the bathroom?

Yes, but with caution. Do not use near water (bath, shower, basin). Unplug after use, as water proximity poses a danger even when off. Consider installing a residual current device (RCD) rated ≤30 mA.

What does the cool shot button do?

Press and hold the cold air button (A3) to release cool air, which helps set your hairstyle in place after drying.

How do I set the temperature and speed?

Use switch A5 for airflow speed (0-off, 1-gentle, 2-fast) and switch A4 for drying temperature (○ low, ● medium, ●● high). Adjust based on your hair type and styling needs.

What should I do if the hair dryer stops suddenly?

It may have an automatic shut-off due to blocked air openings. Disconnect from power, let it cool for a few minutes, and remove any obstruction from the inflow or outflow before restarting.

Is the SHD 108VT suitable for all hair types?

Yes. Use low temperature and gentle speed for fine or damaged hair, and high settings for thick or coarse hair. The diffuser is great for curly hair, and the concentrator for straight styling.

What is the power consumption of this hair dryer?

The rated power input is 1800-2200 W depending on the setting, at a voltage of 220-240 V.

How can I prolong the life of my hair dryer?

Regularly clean the air inflow grill, avoid using near water, do not pull the cord to unplug, and store in a dry place. Use only recommended accessories.

USER MANUAL SHD 108VT SENCOR

Black Sensor hair dryer with a circular brush holder, no visible text or symbols on the device itself.

SENCOR®

SHD 108VT

Translation of the original manual

Prior to using this appliance, please read the user's manual thoroughly, even in cases, when one has already familiarised themselves with previous use of similar types of appliances. Only use the appliance in the manner described in this user's manual. Keep the manual for future use.

Save the original shipping transport box, packaging material, receipt and warranty card for the duration of the warranty. In the event of transportation, pack the appliance using the original packaging materials only.

EN-1

CONTENT

IMPORTANT SAFETY INSTRUCTIONS....3

READ CAREFULLY AND STORE IT FOR FUTURE USE. 3

DESCRIPTION OF THE HAIR DRYER....5

USING THE HAIR DRYER....6

CLEANING AND MAINTENANCE 6

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS....7

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT....7

IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND STORE IT FOR FUTURE USE.

This appliance may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons, if they are properly supervised or have been informed about how to use the product in a safe manner and understand the potential dangers.

■Children must not play with the appliance.
- Cleaning and maintenance performed by the user must not be performed by unsupervised children.
- In the event that the power cord is damaged, have it repaired at a professional service centre to prevent causing a dangerous situation. It is forbidden to use the appliance if it has a damaged power cord.

Warning:

Do not use this appliance in the vicinity of water.

Warning:

Do not use this appliance near baths, showers, washbasins or other containers containing water.

• In the event that you use the appliance in the bathroom, unplug it from the socket after use by removing the plug from the socket, as the vicinity of water poses a danger, even when the appliance is turned off.
• To ensure additional safety, it is recommended to install an Residual Current Device (RCD) into the electric

• circuit to the bathroom with a maximum current rating of 30 mA. Ask an electrician for advice.
  ■ Before connecting this appliance to the socket outlet, make sure the voltage stated on the label of the product corresponds to the voltage in your wall socket.

• Never use accessories, which have not been supplied with this appliance or which have not been explicitly recommended by the manufacturer.
  ■ This appliance is designed for domestic use only. Do not use it in industrial surroundings or outdoors.

• Do not spray the appliance with water or any other liquid. Do not submerge it in water or in any other liquid.

- Ensure that the power plug contacts do not come into contact with water or moisture.

- Do not place the appliance in the vicinity of an open flame or appliances that are sources of heat.

- Do not place the power cord near hot places or over sharp objects. Do not place heavy items on the power cord. Position the power cord so that it will not be stepped on or tripped over.

- Ensure that the inflow and outflow openings are not blocked while the appliance is running. If any of the openings become blocked, the appliance will shut down automatically. Disconnect it from the power socket and allow it to cool down for several minutes. Remove the obstacle blocking the inflow or outflow of air before turning the appliance on again.

■Disconnect the appliance from the power socket after every use.

- Do not disconnect the appliance from the power socket by pulling on the power cord. This could damage the power cord or the power socket. Disconnect the cord from the power socket by gently pulling out the plug of the power cord.

- To avoid the danger of injury by electrical shock, do not repair the appliance yourself or make any adjustments to it. Have all repairs or adjustments of the appliance performed at an authorised service centre. Tampering with the appliance during the warranty period may void the warranty policy.

DESCRIPTION OF THE HAIR DRYER

A

A1 Removable airflow concentrator
A6 Diffuser for a bulky hairstyle
A2 Air exhaust opening
A7 Tilt-out air inflow grill
A3 Pulse button for activating cool air
A8 Hanging loop
A4 Drying temperature switch
A5 Airflow speed and power switch

USING THE HAIR DRYER

1) Wash your hair using a shampoo and treat it with a conditioner before using the hair dryer; this will make combing easier. Dry washed hair using a towel and comb it out.
2) Select attachment A1 or A6 and attach it to the hair dryer.
Attachment A1 can be used for quickly drying hair or for hairstyling. When hairstyling, comb through your hair using a brush or comb and point attachment A1 at the hair strand you are working on.
Use attachment A6 to give volume to your hairstyle. When drying your hair, it is necessary for the prongs of the diffuser A6 to point perpendicular to your head and to be touching your scalp. Using slow circular motions, gradually dry all parts of your hair.
3) Insert the power plug into the an electrical power socket. Use switches A5 and A4 to set airflow speed and drying temperature.

Setting switch A5	Airflow speed
0	Hair dryer is turned off.
1	Gentle air flow setting is used for gradual hairstyling.
2	Fast air flow setting is used to quickly dry hair.
Setting switch A4	Drying temperature
○	Low temperature is used to gradually dry your hair.
●	Middle temperature for easy hairstyling.
●	High temperature is used to quickly dry your hair.

Ionisation function

After starting your hair dryer, activate the ionisation function, which creates negative ions. These neutralise the static charge in your hair and give your hair shine and vitality.

To fix your hairstyle in place, press and hold the cold air button A3 for several seconds.

Tip:

To make the hairstyle last longer, we recommended the application of special hair products, e.g. hair sprays, mousse or hair gel.

4) When you finish using the hair dryer, turn it off by moving switch A5 to position 0 and disconnect it from the power socket.

CLEANING AND MAINTENANCE

• Before cleaning the hair dryer, always turn it off and disconnect it from the power outlet.
- Use your thumb to push down the top edge of grill A7 and tilt grill A7 away from the hair dryer. Remove any hair that is caught in the air inflow. Tilt grill A7 back and carefully press it against the hair dryer until an audible click is heard. Check that grill A7 is properly attached to the hair dryer.
• To clean the outer surface you can use a wiping cloth lightly dipped in a solution of neutral detergent. Wipe dry the surface that you wiped with the damp cloth.
- Never submerge the hair dryer in water or any other liquid. Do not use abrasive cleaning products, alcohol, petrol or similar agents.

TECHNICAL SPECIFICATIONS

Nominal voltage range....220–240 V

Nominal frequency 50/60 Hz

Rated power input 1800-2200 W

Safety class (for electric shock protection)....II

Noise level....70 dB(A)

The declared noise emission level of the appliance is 70 dB(A), which represents a level A of acoustic power with respect to a reference acoustic power of 1 pW.

Glossary of technical terms

Safety class for electric shock protection:

Class II – Electric shock protection is provided by double or heavy-duty insulation.

Changes to text and technical parameters are reserved.

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS

Dispose of used packaging material at a site designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste. For proper disposal, renewal and recycling hand over these appliances to determined collection points. Alternatively, in some European Union states or other European countries you may return your appliances to the local retailer when buying an equivalent new appliance. Correct disposal of this product helps save valuable natural resources and prevents potential negative effects on the environment and human health, which could result from improper waste disposal. Ask your local authorities or collection facility for more details. In accordance with national regulations

penalties may be imposed for the incorrect disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic appliances, ask your retailer or supplier for the necessary information.

Disposal in other countries outside the European Union

This symbol is valid in the European Union. If you wish to dispose of this product, request the necessary information about the correct disposal method from the local council or from your retailer.

This product meets all the basic requirements of EU directives related to it.