SVC 8000B TANGO - Vacuum Cleaner SENCOR - Free user manual and instructions

Product Type	Robotic Vacuum Cleaner
Model	SVC 8000B TANGO
Brand	Sencor
Dimensions (Diameter x Height)	Approx. 33 cm x 9 cm
Weight	Approx. 3.2 kg
Power Supply	Rechargeable Li-ion battery (14.8 V / 2600 mAh)
Charging Station	Automatic docking and charging
Dust Container Capacity	0.6 L
Filtration System	High-efficiency filter (washable)
Cleaning Modes	Auto, Spot, Edge, and Scheduled cleaning
Navigation	Random pattern with obstacle detection
Side Brush	Yes (replaceable)
Remote Control	Included (battery operated)
Battery Life	Up to 90 minutes (typical use)
Charging Time	Approx. 4 hours
Noise Level	≤ 65 dB
Maintenance	Regularly empty dustbin, clean filter, replace side brush as needed
Safety Features	Anti-drop sensors, bumpers, low battery auto-return
Spare Parts Available	Side brush, filter, battery, charging station
Warranty	2 years (standard)

Frequently Asked Questions - SVC 8000B TANGO SENCOR

How do I start the Sencor SVC 8000B TANGO vacuum?

Press the Start/Stop button on the unit or use the remote control. Ensure the battery is charged and the dustbin is empty.

Can I schedule cleaning?

Yes, you can set a daily schedule using the remote control or the buttons on the vacuum. Refer to the manual for programming steps.

How long does the battery last?

The battery lasts up to 90 minutes on a full charge, depending on surface type and cleaning mode. When low, it automatically returns to the charging station.

What should I do if the vacuum gets stuck?

Remove any obstacles in its path. If stuck on a threshold or furniture, lift the vacuum gently and place it on a clear area. The sensor may need cleaning if it frequently gets stuck.

How do I clean the filter?

Remove the dustbin, take out the filter, and tap it gently or rinse with water (if washable). Let it dry completely before reinstalling. Replace every 2-3 months for optimal performance.

Why is the vacuum not charging?

Check that the charging station is plugged in and the metal contacts on the vacuum and station are clean. Ensure the vacuum is properly docked. If the battery is completely drained, it may take a few minutes to start charging.

How often should I replace the side brush?

Replace the side brush every 6 months or when it becomes worn or deformed. You can purchase a replacement brush from authorized dealers.

Can the vacuum work on carpets?

Yes, it works on low-pile carpets and hard floors. For high-pile carpets, performance may be reduced. The vacuum automatically adjusts suction power on some models.

What does 'Error 3' mean?

Error 3 typically indicates a wheel jam or sensor obstruction. Turn off the vacuum, check the wheels for hair or debris, and clean the sensors with a soft cloth.

Where can I download the user manual?

You can download the manual for SVC 8000B TANGO from the official Sencor website or from notice-facile.com in PDF format.

USER MANUAL SVC 8000B TANGO SENCOR

Black circular device with brand labels including SENCOR and Tangelo, featuring a radar or scanning device (no readable text beyond branding)

SENCOR®

SVC 8000B / SVC 8000S

Diagram of a mechanical component with concentric circles and shaded regions, no text or symbols present

②

③

Simple line drawing of a rectangular electronic component with two side connectors (no text or symbols)

④

Simple line drawing of three stacked papers or documents (no text or symbols)

⑤

Two identical black-and-white illustrations of coiled cable or wires with no text or symbols

⑥

⑦

Illustration of a remote control with stylized buttons and a circular dial (no text or symbols)

⑧

Simple geometric shape: a plain white rectangle with no text, numbers, or symbols.

⑨

Technical line drawing of a mechanical component with grid pattern (no text or symbols)

⑩

Line drawing of a mechanical component with a curved body and internal slots (no text or symbols)

B

C

POPIS DOBÍJECÍ STANICE

D

Line drawing of a mechanical component with a handle and internal slots (no text or symbols)

②

③

E

Line drawing of a portable air conditioner unit with ventilation slots and a control panel (no text or symbols)

POPIS OVLÁDACÍHO PANELU VYSAVAČE

F

②

CZ-13

Zkouška

Technical line drawing of a robotic device with two fan-like components and control panel (no text or symbols)

Interior view of a device casing with labeled components and an arrow pointing to a component (no text or symbols present)

Technical line drawing of a device interior showing a circular component and a fan-like structure with a grid pattern (no text or symbols)

②

Diagram of a vacuum cleaner with a close-up view showing internal components (no text or symbols)

②

Diagram showing a mechanical component before and after assembly, with no visible text or symbols

②

Diagram showing a hand using a tool to lift a component into a circular housing (no text or symbols present)

0

③

④

⑤

graph TD
    A["Initial handling of plastic component"] --> B["Step 1: Hand holding part, arrow indicates upward motion"]
    B --> C["Step 2: Hand holding a plastic component with grid pattern, arrow indicates upward motion"]
    C --> D["Step 3: Hand holding a plastic component with internal structure, arrow indicates upward motion"]
    D --> E["Step 4: Hand holding a plastic component with internal structure, arrow indicates upward motion"]
    E --> F["Final processing: Initial mixing with granular material and particles in a container"]

0
⑥

Line drawing of a faucet with a handle and side panel (no text or symbols)

⑦

Line drawing of a hand using scissors to cut a grid-patterned object (no text or symbols)

⑧

Illustration of a hand holding a mechanical component with an arrow indicating downward motion (no text or symbols)

Diagram showing a hand holding a small object being processed into a 3D mechanical component (no text or symbols present)

⑨

POZOR!!

Top-down schematic of a device's internal components (no text or symbols visible)

Diagram of an electronic device showing internal components and cable connections (no text or labels)

Boční kartáč

ODSTRANOVANI PROBLEMU

CZ-23