KM0765 - Microphone Krüger&Matz - Free user manual and instructions
Find the device manual for free KM0765 Krüger&Matz in PDF.
| Product Type | USB Gaming Microphone |
| Brand | Krüger&Matz |
| Model | KM0765 |
| Connectivity | USB |
| Headphone Output | 3.5 mm jack |
| Sampling Rate | 16 bit / 48 kHz |
| Frequency Response | 30 Hz - 18 kHz |
| Sensitivity | -36 dB |
| Maximum SPL | 96 dB |
| Polar Pattern | Cardioid |
| Controls | Gain knob, volume knob, mute button with LED |
| Backlight | LED, 5 colors |
| Cable Length | 1.8 m |
| Weight | 564 g |
| Included Accessories | Tripod, microphone holder, USB cable, foam filter, user's manual |
| Operating Conditions | Place on flat stable surface; avoid extreme temperatures, humidity, and strong magnetic fields |
| Cleaning | Use soft, slightly damp cloth; no chemical agents |
| Safety | Do not disassemble; keep away from children; disconnect when not in use |
Frequently Asked Questions - KM0765 Krüger&Matz
User questions about KM0765 Krüger&Matz
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Microphone in PDF format for free! Find your manual KM0765 - Krüger&Matz and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KM0765 by Krüger&Matz.
USER MANUAL KM0765 Krüger&Matz
USB gaming microphone KM0765

line
| Point | Value | |-------|-------| | 1 | 0.5 | | 2 | 0.6 | | 3 | 0.7 | | 4 | 0.8 | | 5 | 0.9 | | 6 | 1.0 | | 7 | 0.9 | | 8 | 0.8 | | 9 | 0.7 | | 10 | 0.6 | | 11 | 0.5 | | 12 | 0.4 | | 13 | 0.3 | | 14 | 0.2 | | 15 | 0.1 | | 16 | 0.0 | | 17 | -0.1 | | 18 | -0.2 | | 19 | -0.3 | | 20 | -0.4 | | 21 | -0.5 | | 22 | -0.6 | | 23 | -0.7 | | 24 | -0.8 | | 25 | -0.9 | | 26 | -1.0 | | 27 | -0.9 | | 28 | -0.8 | | 29 | -0.7 | | 30 | -0.6 | | 31 | -0.5 | | 32 | -0.4 | | 33 | -0.3 | | 34 | -0.2 | | 35 | -0.1 | | 36 | 0.0 | | 37 | 0.1 | | 38 | 0.2 | | 39 | 0.3 | | 40 | 0.4 | | 41 | 0.5 | | 42 | 0.6 | | 43 | 0.7 | | 44 | 0.8 | | 45 | 0.9 | | 46 | 1.0 | | 47 | 0.9 | | 48 | 0.8 | | 49 | 0.7 | | 50 | 0.6 | | 51 | 0.5 | | 52 | 0.4 | | 53 | 0.3 | | 54 | 0.2 | | 55 | 0.1 | | 56 | 0.0 | | 57 | -0.1 | | 58 | -0.2 | | 59 | -0.3 | | 60 | -0.4 | | 61 | -0.5 | | 62 | -0.6 | | 63 | -0.7 | | 64 | -0.8 | | 65 | -0.9 | | 66 | -1.0 | | 67 | -0.9 | | 68 | -0.8 | | 69 | -0.7 | | 70 | -0.6 | | 71 | -0.5 | | 72 | -0.4 | | 73 | -0.3 | | 74 | -0.2 | | 75 | -0.1 | | 76 | 0.0 | | 77 | -0.1 | | 78 | -0.2 | | 79 | -0.3 | | 80 | -0.4 | | 81 | -0.5 | | 82 | -0.6 | | 83 | -0.7 | | 84 | -0.8 | | 85 | -0.9 | | 86 | -1.0 | | 87 | -0.9 | | 88 | -0.8 | | 89 | -0.7 | | 90 | -0.6 | | 91 | -0.5 | | 92 | -0.4 | | 93 | -0.3 | | 94 | -0.2 | | 95 | -0.1 | | 96 | 0.0 | | 97 | -0.1 | | 98 | -0.2 | | 99 | -0.3 | | Note: The data is a sample of values from the 'Bediennungsanleitung' column in the code.BEDIENUNGSANLEITUNG
OWNER'S MANUAL
INSTRUKCJA OBSŁUGI
MANUAL DE UTILIZARE
MONTAGE
Please read this operation instruction carefully before use, and keep it for future reference. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.
- Protect this device from extreme temperatures, sources of heat and direct sunlight. Do not expose the device to water or humidity nor install near strong magnetic field. Do not handle this device with wet hands.
- Disconnect from power supply if the device is not going to be used for a long time.
- Do not use this device if it has been damaged.
- Place the device on flat, stable surface.
- Prevent the device from falling on the ground or being strongly impacted.
- Producer does not claim liability for any damage caused by inappropriate use and handling or any mechanical damage.
- Producer does not guarantee compatibility with every external device.
• This product is not a toy; keep it beyond children's reach. - Do not disassemble nor repair this device yourself. The device has no user serviceable parts inside. In case of damage, contact authorized service point for check-up or repair.
• Always disconnect the product from the power mains before cleaning. Clean the device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.
PRODUCT DESCRIPTION
- Microphone
- LED Backlight
- Mute button with LED
- • Microphone gain knob
- Backlight change button
- Headphones volume knob
- Headphone jack
- Spindle thread
- USB output

MOUNTING
- Screw the microphone holder to the tripod.
- Screw the microphone to the microphone holder.
- Pivot point of the microphone can be adjusted. To do that unscrew the bolt on the microphone holder, adjust pivot point of the microphone, and screw the bolt in.
Z
INSTALLATION
Plug the USB cable (included in package) to the USB output of the microphone, then plug the USB plug to a free USB port in a computer. No driver installation is needed, operating system will automatically configure the device and set it as a default recording device.
OPERATION
- For correct recording, speak directly to upper part in the front of the microphone.
• To change gain level of the microphone, use gain knob. Pressing the knob will change the backlight (5 colors available).
- To mute the microphone press the mute button. The LED inside the button will start flashing. If mute is disabled, the LED will glow continuously.
- In order to listen to audio from a computer and recorded voice through headphones, plug the headphones to the headphone jack. Volume can be adjusted by turning the volume knob.
SPECIFICATION
- USB port
• 3,5 mm headphone jack
• Sampling rate: 16 bit / 48 kHz
• Frequency response: 30 Hz - 18 kHz
• Sensitivity: -36 dB
• Maximum SPL: 96 dB
- Pattern: cardioid
- Microphone gain knob
• Volume level knob
- Mute button with LED
- LED backlight
- Cable length: 1,8 m
- Weight: 564 g
- Inside packaging: USB microphone, tripod, microphone holder, USB cable, foam filter, user's manual
LEARN MORE
For more information on this product, go to www.krugermatz.com.
Visit www.krugermatz.com website for more products and accessories.
In case of any doubts or questions reach out to our Frequently Asked Questions section.
Z

English Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.
KWESTIE BEZPIECZEŃSTWA
MONTAŻ
MONTARE
- Esantionare: 16 bit / 48 kHz
line
| X | Y | |---|---| | 0.0 | 0.0 | | 0.1 | 0.1 | | 0.2 | 0.2 | | 0.3 | 0.3 | | 0.4 | 0.4 | | 0.5 | 0.5 | | 0.6 | 0.6 | | 0.7 | 0.7 | | 0.8 | 0.8 | | 0.9 | 0.9 | | 1.0 | 1.0 | | 1.1 | 0.9 | | 1.2 | 0.8 | | 1.3 | 0.7 | | 1.4 | 0.6 | | 1.5 | 0.5 | | 1.6 | 0.4 | | 1.7 | 0.3 | | 1.8 | 0.2 | | 1.9 | 0.1 | | 2.0 | 0.0 |
www.krugermatz.com
Krüger&Matz is a registered trademark