MFG 7360 - Cooker BARTSCHER - Free user manual and instructions

Product Type	Gas Cooker
Brand	Bartscher
Model	MFG 7360
Category	Cooker
Dimensions (W x D x H)	800 x 800 x 850 mm
Weight	80 kg
Power Supply	400V 3N~ 50Hz (electric oven), Gas (hob)
Energy Type	Gas with electric oven
Number of Gas Burners	6
Oven Capacity	2 compartments
Oven Type	Fan-assisted electric oven
Control Type	Rotary knobs with thermostat
Material	Stainless steel body
Safety Features	Flame failure device, thermocouple, overheat protection
Cleaning & Maintenance	Removable burner caps, enamel oven interior
Accessories Included	2 oven grills, 2 baking trays
Certifications	CE
Warranty	2 years
Color	Silver
Installation Requirement	Gas connection and electrical outlet

Frequently Asked Questions - MFG 7360 BARTSCHER

What type of gas does the MFG 7360 cooker require?

The MFG 7360 is designed for natural gas or LPG. Conversion kits are available. Check the manual for pressure requirements.

How to clean the oven interior?

Use a damp cloth and mild detergent. Do not use abrasive cleaners. The enamel interior can be cleaned easily; remove racks and trays first.

Can the oven be used without fan?

No, the oven uses a fan-assisted system for even heat distribution. It cannot be operated without the fan.

What is the maximum oven temperature?

The oven thermostat is calibrated up to 250°C.

How to replace a burner cap?

Ensure the cooker is off and cool. Lift the burner cap off; clean the area, then place the new cap aligning the slots. Contact Bartscher for genuine parts.

What should I do if the oven does not heat?

Check the circuit breaker and the thermostat setting. If still not heating, the heating element may be faulty. Contact a qualified technician.

Are spare parts available for the MFG 7360?

Yes, Bartscher offers spare parts such as burner components, oven elements, and seals. Check the service network on their website.

Can I install the cooker myself?

Installation must be done by a qualified professional to comply with gas and electrical regulations.

How to adjust the flame on gas burners?

Use the air shutter near the burner to adjust flame color. A yellow flame indicates incomplete combustion; adjust until blue.

What does the flame failure device do?

It automatically cuts off gas flow if the flame is extinguished, ensuring safety. If the device fails to keep the gas on, clean the thermocouple.

USER MANUAL MFG 7360 BARTSCHER

Exterior view of a stainless steel commercial kitchen appliance with multiple gas stove covers (no visible text or symbols)

MFG 7341 / 1582011

Exterior view of a stainless steel commercial kitchen with six burners and control knobs (no visible text or symbols)

MFGO 7060 / 1582101

Exterior view of a stainless steel gas stove with four top-tiered flanges and control knobs (no visible text or symbols)

MFGO 7040 / 1582051

Exterior view of a stainless steel commercial kitchen with multiple gas stove units (no visible text or symbols)

MFG 7360 / 1582201

ENGLISH

Table of contentín

1. SafetZ 36

This değice is designed in accırdance Sizh zhe aresenzly aąalicable zechnślsgical szandards. HsSeğer, zhe değice can aşse a danger if handled imarşaerly and inaqarśariażely.

ThÑn nZmbol hNghlNghtn haAaśln whNch coell leal to NnjeśZ.

WARNING!

ThÑn nZmbol hNghlNghtn langeśoęń nNtęatNonń whNch coell leal to NnjeśZ oś leath.

HOT SURFACE!

ThÑn nZmbol Ná a waśnNng that the ležNce nęsface Ná hot when Ná eñe. IgnośNng thNá waśnNng maZ senelt Ná beśnín!

CAUTION!

1.2 SafetŽ ĎnńtśęctČnonń

Any zechnical inżeręenżiśns, as Šell as assembly and mainżenance are żś be made by a nżalified czszśmer seręice śnly.

The gań ożen Řń Řntenlel onlŻ foś pśepaśÑng appósopsă Nate fool pśołęctn.

Close-up of a gas stove burner with numbered arrows indicating components (no text or symbols present)

Close-up of a gas stove burner with numbered arrows pointing to its components (no text or symbols present)

Close-up of industrial gas stove flanges with visible heat dissipation (no text or symbols)

① Casz irśn graże

② Gas bźrners (6)

a) Flow pressure control (fig. 1)

FÑg. 1

CAUTION!

The ležNce opesateń cośsectlŽ onlŽ when the pšeńnęse Řn the gań nŽntem Řn Řn śange foś IÑffeśent gań categośNén ñpecÑfNél Řn table 1 “Gañ categośNén Řn żaśNoęń coçntsNén” on pagen 53 anl 54.

b) Main burner control

a) Replacement of main burner nozzle

b) Replacement of ignition burner nozzle

c) Primary air adjustment (fig. 2)

d) Ignition burner adjustment

Adjższ żhe igniżiśn bźrner and see if żhe flame is cśrrecż and cśęers żhe żhermal elemenż. If nśż, see if cśrrecż nśzzles are insżalled (table 2, page 54).

e) Flame reduction adjustment (fig. 3)

Mechanical component diagram showing a shaft and housing assembly (no text or symbols)

FÑg. 3

Close-up of a black industrial knob with a handle and circular dial (no visible text or symbols)

FÑg. 5

Instructions and advices

Temperature adjustment

Close-up of a black kitchen control knob (no text or symbols visible)

FÑg. 7

Functions

Close-up of a glossy black spherical object with a small loop, possibly a knob or dial (no text or symbols visible)

FÑg. 8

CAUTION!

When the ožen Řn not çnel, tęśn the fęnctNon nélectNon knob to pońNtNon OFF.

Levels

Interior view of a stainless steel oven with metal grating and insulation layers (no text or symbols visible)

FÑg. 9

InítsęctNonń anl alżNceń

Leaže the ležNce to cool lown completelŽ.