PBA-2600C - Power bank DENVER - Free user manual and instructions

Brand	DENVER
Model	PBA-2600
Product Type	Power Bank (External Battery)
Battery Type	Lithium-ion
Battery Capacity	2600 mAh / 3.7 V
Input	DC 5V, 500 mA (max)
Output	DC 5V, 800 mA (max)
Dimensions (L x W x H)	Approx. 96 x 24 x 22 mm
Charging Time (500mA adapter)	Approx. 5 hours
Charging Time (1A adapter)	Approx. 2.5 hours
Operating Temperature (charging)	0°C to 45°C
Operating Temperature (discharging)	-10°C to 60°C
Storage Temperature	-20°C to 60°C
Compatible Devices	Smartphones, MP3, MP4, and other digital products with USB 5V input
Charging Interface	Micro USB (input), USB-A (output)
Protection Features	Overcharge and short circuit protection
Usage Environment	Outdoors, indoors, vehicle
Storage	Keep in cool, dry place away from direct sunlight
Disposal	Do not dispose with household waste; recycle at designated collection points

Frequently Asked Questions - PBA-2600C DENVER

How do I charge the Denver PBA-2600 power bank itself?

Use the original micro USB cable to connect the micro USB port on the power bank to a USB port on a computer or a DC5V USB charger (AC adapter not included). The LED will flicker to indicate charging. Unplug once fully charged.

How do I charge my smartphone with the PBA-2600?

First ensure your device supports 5V USB charging. Use your device's original charging cable to connect it to the USB output port of the power bank. The output LED will light up to indicate charging. When the LED goes out, your device is fully charged.

What is the battery capacity of the PBA-2600?

The internal lithium-ion battery has a capacity of 2600 mAh at 3.7V. This can provide approximately one full charge for most smartphones with smaller batteries.

What devices are compatible with this power bank?

The PBA-2600 supports most devices that charge via a USB 5V input, including smartphones, MP3 players, MP4 players, and other digital products. Always verify the voltage compatibility before use.

How long does it take to fully charge the power bank?

Using a 500mA AC adapter, charging takes about 5 hours. With a 1A adapter, it takes about 2.5 hours. Charging via a computer USB port may take longer.

Can I use the power bank while it is charging?

It is not recommended to use the power bank to charge another device while it is being charged itself. The manual advises to disconnect after full charge and avoid unsupervised use.

What does the LED indicator mean?

During charging of the power bank, a flickering LED indicates charging. When the power bank is discharging to charge another device, the output LED is on. When the LED goes out, the connected device is fully charged or the power bank is depleted.

What safety precautions should I follow?

Keep the device away from heat, humidity, and direct sunlight. Do not throw into fire or water. Avoid disassembly, shaking, or impacts. If liquid leaks, avoid contact with eyes and flush with water. Use original cables to prevent damage.

How should I store the power bank when not in use?

Store in a cool, dry place at temperatures between -20°C and 60°C. For long-term storage, charge and discharge the unit every three months to maintain battery life. Always fully charge before prolonged storage.

Is it normal for the power bank to get hot?

Yes, it is normal for the product to become warm during use. Ensure proper ventilation and do not cover the device. If it becomes excessively hot, stop using and let it cool down.

USER MANUAL PBA-2600C DENVER

D. Micro USB connector

1. Charge DENVER PBA-2600 with AC adapter (AC adapter is not included)

Simple line drawing of a power strip connected to an electrical outlet (no text or symbols)

1. Charge DENVER PBA-2600 by connecting it to USB port on computer

Simple line drawing of a battery connected to a stack of plates (no text or symbols)

1. Charging digital products using DENVER PBA-2600

Line drawing of a smartphone connected to a battery via cable (no text or symbols)

DENVER PBA-2600

Portable Extra Power

Support most DC5V USB input smartphones, MP3, MP4 and other digital products charging.

Thank you for using DENVER products.

Please read the instructions carefully before using the product.

Follow the instructions and use it properly.

Instructions

Charging DENVER PBA-2600 (Figure ① / Figure ②)

1. Use original USB data cable and connect micro USB to micro USB port on DENVER PBA-2600;
2. Connect USB cable to USB port on DC5V USB charger or computer. If LED signal flickers, it means DENVER PBA-2600 is being charged;

Please pull out power supply after recharging fully.

Charging digital product with DENVER PBA-2600 (Figure ③)

1. Check if the charging voltage of the digital product is compatible with the DC5V output voltage of DENVER PBA-2600.
2. Use the digital product's original cable, and connect one end to the digital product, the other end to DENVER PBA-2600.
   If battery signal (output signal) lights up, it means the charging process starts. When the signal (output signal) goes out, it means the digital product is fully charged.

Specifications

Name	DENVER PBA-2600	Model	PBA-2600
Lithium-ion battery inside	2600mAh/3.7V Weight
Input DC5V 500mA MAX.
Output DC5V 800mA MAX.
Size	~L96x W24 X H22mm
Charging time	~5 hours (using 500mA AC adapter) ~2,5 hours (using 1A AC adapter)
Environment for Use	Outdoors/indoors/inside a vehicle
Ambient Temperature for Use	Charging 0°C~45°C; discharging -10°C~60°C
Environment for Storage	-20°C~60°C

Cautions:

1. Charge the product itself before using it to charge other products.
2. Do not place or use the product in very hot or humid environment; do not place or use it in direct sunlight (ambient temperature for use: charging 0^ C\~ 45^ C; discharging -10^ C\~ 60^ C; ambient temperature for storage -20^ C\~ 60^ C).
3. Do not throw this product into fire or water, so as to avoid possible fire and explosion.
4. Please keep the product out of the reach of children.
5. Do not use it when nobody is around.
6. Do not dismantle or assembly the product yourself; the product does not have any parts that need users to dismantle, assembly or maintain themselves.
7. Do not shake it, tap it or hit it.
8. Do not use it if any liquid leaks out of the product. If the liquid goes into your eyes, do not rub your eyes, but quickly flush your eyes with running water. If necessary, go to see a doctor.
9. It is normal that the product gets hot under proper operations. Please use with care when using or finishing using the product.
10. Original transmission cables and connectors are required for all operations. Use of non-original products may lead to severe or deadly injuries or monetary loss.
11. Do not use paper or other objects to cover or shield the product, which may affect heat dissipation and cooling.
12. Check the voltage before using the product, so as to avoid unnecessary damage to the product caused by improper use under inaccurate voltage or power.
13. Please charge and discharge the product once every three months if it is not used for a long time. This can ensure the life cycle of the product.
14. Once discharged, please recharge the product fully so as to prepare for later use, for example, for charging digital products.
15. Unplug the power cable when not using the product, so as to avoid injury or property loss.

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

DENVER®

www.denver-electronics.com

Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.

As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.

All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.

Imported by:

DENVER ELECTRONICS A/S

Stavneagervej 22

DK-8250 Egaa

Denmark

www.facebook.com/denverelectronics